MCM Electronics

Search results for Adhesives, Caulk & Sealants

99 Products Found Sort By
Previous   23456 ... 7 Next
Product Detail Availability Buy
Image of Bob Smith Industries 113 MAXI-CURE™ Cyanocrylate Extra Thick Super Glue - 2oz. Bottle

3

20-6161 - MAXI-CURE™ Cyanocrylate Extra Thick Super Glue - 2oz. Bottle

Bob Smith Industries' Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be car...

Mfr Name: Bob Smith Industries

Mfr Number: 113

In Stock

$8.99

(MSRP: $9.99)
Buy Now
Image of Bob Smith Industries 151 INSTA-SET™ CA Foam Safe Accelertor - 2oz. Pump Spray

3

20-6170 - INSTA-SET™ CA Foam Safe Accelertor - 2oz. Pump Spray

Bob Smith Industries' INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joi...

Mfr Name: Bob Smith Industries

Mfr Number: 151

In Stock

$5.49

(MSRP: $5.99)
Buy Now
Image of 3M 18091 Quick Set Epoxy - 5 Minute Setup - 1 oz

3

108-5440 - Quick Set Epoxy - 5 Minute Setup - 1 oz

Quick Set Epoxy automatically dispenses into equal parts and is weatherproof. Bonds most surfaces. Sets in 5 minutes.

Mfr Name: 3M

Mfr Number: 18091

In Stock

$3.99

Buy Now
Image of MG Chemicals 832TC-450ML Thermally Conductive Black Epoxy Liquid - 16 oz

3

20-5760 - Thermally Conductive Black Epoxy Liquid - 16 oz

The 832TC thermally conductive epoxy provides superior protection from impact, shock, conductivity, moisture and more. Pigmented black with high purity aluminum oxide for thermal conductivity, thermal absorption and emission.

Mfr Name: MG Chemicals

Mfr Number: 832TC-450ML

In Stock

$47.99

Buy Now
Image of Bob Smith Industries 103 INSTA-CURE™ Cyanocrylate Super Thin Super Glue - 2oz. Bottle

3

20-6151 - INSTA-CURE™ Cyanocrylate Super Thin Super Glue - 2oz. Bottle

Bob Smith Industries' Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of ...

Mfr Name: Bob Smith Industries

Mfr Number: 103

In Stock

$8.99

(MSRP: $9.99)
Buy Now
Image of Loctite 46551 Prism 404 Instant Adhesive - .33 oz. Bottle

3

20-2968 - Prism 404 Instant Adhesive - .33 oz. Bottle

Prism® adhesives offer an instant adhesive for just about any surface under any condition. 404: A Quick Set™ adhesive that is a clear liquid and is used for general maintenance and repair. Bonds rubber, plastics, metal, cardboard, and wo...

Mfr Name: Loctite

Mfr Number: 46551

In Stock

$20.99

Buy Now
Image of MG Chemicals 8334-3ML SUPER GLUE GEL                 3 ML

3

20-5830 - Super Glue GEL 3 ML

Cyanoacrylate adhesive has been formulated to quickly bond plastics, metal and ceramics. Provides excellent strength characteristics for a wide range of applications.

Mfr Name: MG Chemicals

Mfr Number: 8334-3ML

In Stock

$2.29

Buy Now
Image of Bob Smith Industries 161 UN-CURE™ Cyanoacrylate Debonder - 1oz. Bottle

3

20-6175 - UN-CURE™ Cyanoacrylate Debonder - 1oz. Bottle

Bob Smith Industries' UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone t...

Mfr Name: Bob Smith Industries

Mfr Number: 161

In Stock

$3.89

(MSRP: $3.99)
Buy Now
Image of GC Electronics 10-4102 Polystyrene Q Dope Thinner

3

20-980 - Polystyrene Q Dope Thinner

•Used to thin polystyrene based coil dopes and cements •Can also be used for cementing polystyrene materials •2 fl. oz. bottle

Mfr Name: GC Electronics

Mfr Number: 10-4102

In Stock

$9.99

Buy Now
Image of Loctite 40140 Prism 401 Instant Adhesive - 0.7 oz. Tube

3

20-2964 - Prism 401 Instant Adhesive - 0.7 oz. Tube

Prism® adhesives offer an instant adhesive for just about any surface under any condition. 401: A surface insensitive adhesive that is clear liquid. Bonds many hard to bond materials including: Plastics, cork, wood, cardboard, foam, and me...

Mfr Name: Loctite

Mfr Number: 40140

In Stock

$18.49

Buy Now
Image of Distributed By MCM 9-336 Surehold® 90 Second Epoxy 14ml Mixing Syringe

3

20-4525 - Surehold® 90 Second Epoxy 14ml Mixing Syringe

Rapid curing-bond sets in 90 seconds, can be handled in five minutes, and full strength in one-hour Great for bonding metals, ceramics, glass, rubber, wood, plastics, fiberglass, and moreWorks with inconsistent surfaces

Mfr Name: Distributed By MCM

Mfr Number: 9-336

In Stock

$4.99

Buy Now
Image of 3M 051135-08578 3M™ Black Strip-Caulk - Box of 60 - 1' Lengths

3

108-3190 - 3M™ Black Strip-Caulk - Box of 60 - 1' Lengths

Soft, non-hardening caulking material for use in all types of seams, joints and openings. This caulk can easily be thumbed into place and smoothed with finger. Non-sag consistency makes it ideal for vertical and overhead applications.

Mfr Name: 3M

Mfr Number: 051135-08578

In Stock

$17.79

Buy Now
Image of Loctite 37312 Maximum Strength Headliner Adhesive

3

20-4142 - Maximum Strength Headliner Adhesive

Loctite Max Strength Headliner Adhesive is a high-strength and high temperature spray adhesive designed for bonding foam, carpet, fabrics, plastics, rubber, etc. This is due to the high strength and temperature resistance of the product.

Mfr Name: Loctite

Mfr Number: 37312

In Stock

$11.39

Buy Now
Image of 3M 18040 Ceramic Adhesive - 1 oz

3

108-5400 - Ceramic Adhesive - 1 oz

3M Ceramic Adhesive for Indoor Surfaces works great on ceramic, glass and wood. It is dishwasher safe, dries clear and works on porous and non porous surfaces.

Mfr Name: 3M

Mfr Number: 18040

In Stock

$2.99

Buy Now
Image of 3M 18072 Metal Epoxy - 5 Minutes Setup -  0.20 oz

3

108-5450 - Metal Epoxy - 5 Minutes Setup - 0.20 oz

Metal Adhesive for Outdoor quickly bond metal to another metal surface. Sets in 5 minutes, and dries light gray.

Mfr Name: 3M

Mfr Number: 18072

In Stock

$3.99

Buy Now
Previous   2 3 4 5 6 ... 7 Next