MCM Electronics

Search results for Components

Refine Your Search

  • Include special order items
  • Show in stock items only
1,218 Products Found Sort By
Previous   1 ... 3637383940 ... 82 Next
Product Detail Availability Buy
Image of MCM 3615KL-05W-B30-P00 92mm X 92mm X 38mm 24 Volt DC Fan

384

83-16764 - 92mm X 92mm X 38mm 24 Volt DC Fan

Description This fan features dual ball bearings which provide long-life and reliability. It also has a very low noise output, and a plastic housing and impeller.

Mfr Name: MCM

Mfr Number: 3615KL-05W-B30-P00

In Stock

$18.99

Buy Now
Image of Adafruit Industries 1109 RGB Positive 16x2 LCD + Keypad Kit for Raspberry Pi

383

83-14590 - RGB Positive 16x2 LCD + Keypad Kit for Raspberry Pi

This new Adafruit Pi Plate makes it easy to use an RGB 16x2 Character LCD. These LCDs typically require quite a few digital pins, 6 to control the LCD and then another 3 to control the RGB backlight for a total of 9 pins. That's nearly all the GPIO available on a ...

Mfr Name: Adafruit Industries

Mfr Number: 1109

In Stock

$24.99

Buy Now
Image of MCM 3612KL-05W-B30-E00 92mm X 92mm X 32mm 24 Volt DC Fan

382

83-16763 - 92mm X 92mm X 32mm 24 Volt DC Fan

Description This fan features dual ball bearings which provide long-life and reliability. It also has a very low noise output, and a plastic housing and impeller.

Mfr Name: MCM

Mfr Number: 3612KL-05W-B30-E00

In Stock

$12.99

Buy Now
Image of Adafruit Industries 911 2 LCD Display with Composite input for Raspberry Pi

380

83-14398 - 2" LCD Display with Composite input for Raspberry Pi

Yes, this is an adorable miniature television! The visible display measures only 2" diagonal, the TFT comes with a NTSC/PAL driver board.

Mfr Name: Adafruit Industries

Mfr Number: 911

In Stock

$41.19

Buy Now
Image of Cebek I-2 Single Event 2-45 min Timer Module

380

28-4736 - Single Event 2-45 min Timer Module

Single Event 2-45 minute Timer Module Standard timer with relay output. Single event from 2 to 45 minutes.

Mfr Name: Cebek

Mfr Number: I-2

In Stock

$18.99

Buy Now
Image of Distributed By MCM NL-PDEQ-8019 Peel-N-Stick Bargraph Display 31.5 X 7.5 inches

378

60-11412 - Peel-N-Stick Bargraph Display 31.5 X 7.5 inches

Peel-N-Stick Bar Graph Display Sound activated peel-n-stick bar graph display is perfect for car, home, studio or even audio and DJ equipment. Pre-installed, double sided 3M tape will stick almost anywhere. Blue LED lights move in a spectrum analyzer/equalizer ty...

Mfr Name: Distributed By MCM

Mfr Number: NL-PDEQ-8019

In Stock

$42.99

Buy Now
Image of Distributed By MCM NL-PDEQ-4511 Peel-N-Stick Bargraph Display 17.7 X 4.3 inches

377

60-11410 - Peel-N-Stick Bargraph Display 17.7 X 4.3 inches

Peel-N-Stick Bar Graph Display Sound activated peel-n-stick bar graph display is perfect for car, home, studio or even audio and DJ equipment. Pre-installed, double sided 3M tape will stick almost anywhere. Blue LED lights move in a spectrum analyzer/equalizer ty...

Mfr Name: Distributed By MCM

Mfr Number: NL-PDEQ-4511

In Stock

$22.99

Buy Now
Image of Cebek I-5 4 Output Sequential Control Pre Assembled Module Board

377

28-22972 - 4 Output Sequential Control Pre Assembled Module Board

Sequential Relay Unit This unit houses four NO/NC 5A/230V relays that activate in succession. Control is either on an internal timer, or from an external trigger.

Mfr Name: Cebek

Mfr Number: I-5

In Stock

$44.99

(MSRP: $60.95)
Buy Now
Image of Cebek I-61 Liquid Level Control

377

28-6185 - Liquid Level Control

Liquid Level Control Pre-assembled module utilizes two included liquid sensors to provide control intended for "fill" or "drain" of a water tank. "Fill" mode energizes the relay when the lower sensor does not detect the presence of a liqui...

Mfr Name: Cebek

Mfr Number: I-61

In Stock

$27.59

Buy Now
Image of Adafruit Industries 714 RGB LCD Shield Kit with 16x2 Character Negative Display-Uses Only 2 Pins

375

83-15710 - RGB LCD Shield Kit with 16x2 Character Negative Display-Uses Only 2 Pins

RGB LCD Shield for Arduino Microcontroller Boards that only uses 2 I2C pins. The best part is you don't really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display ...

Mfr Name: Adafruit Industries

Mfr Number: 714

In Stock

$26.20

Buy Now
Image of Kentec Display K90DWN0-V1-F 9 Touch Screne LCD Module with 800x480 Resolution

375

83-14439 - 9" Touch Screne LCD Module with 800x480 Resolution

Backlighting Color: White LCD Display Type: TFT Pixel Pitch (H x W): 0.2327mm x 0.2327mm Display Mode: Transmissive Interface Type: Parallel Viewing Area (H x W): 114.7mm x 201mm

Mfr Name: Kentec Display

Mfr Number: K90DWN0-V1-F

Limited Stock

$69.00

Buy Now
Image of Adafruit Industries 1430 Neopixel Shield For Arduino - 40 RGB LED Pixel Matrix

375

83-15708 - Neopixel Shield For Arduino - 40 RGB LED Pixel Matrix

A 40 eye-blistering RGB LED shield for Arduino Microcontroller Boards. Arranged in a 5x8 matrix, each pixel is individually addressable. Only one pin (Digital #6) is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need so...

Mfr Name: Adafruit Industries

Mfr Number: 1430

In Stock

$29.35

Buy Now
Image of Adafruit Industries 204 MONOCHRON Clock kit - Open source clock platform

375

28-17473 - MONOCHRON Clock kit - Open source clock platform

This easy kit is easily hackable to do whatever you wish, it's a clock platform - have fun!

Mfr Name: Adafruit Industries

Mfr Number: 204

In Stock

$83.93

Buy Now
Image of Distributed By MCM PM11560 3-1/2 Digit Backlit LCD Voltmeter

375

21-14835 - 3-1/2 Digit Backlit LCD Voltmeter

This low cost, compact indicator is ideally suited for low or high volume applications. SP 5-1200-BL is an easy to mount LCD digital panel meter with LED backlighting. The module features a 4 to 25V measurement range with 100mV resolution and is powered from the s...

Mfr Name: Distributed By MCM

Mfr Number: PM11560

In Stock

$44.99

Buy Now
Image of Adafruit Industries 1304 5V USB Li-Poly Battery Charger

374

28-18125 - 5V USB Li-Poly Battery Charger

This is a tiny LiPo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are...

Mfr Name: Adafruit Industries

Mfr Number: 1304

In Stock

$5.99

Buy Now
Previous   1 ... 36 37 38 39 40 ... 82 Next