Search results for Processors

555-18946 - Unbalanced To Balanced Line Combiner

Unbalanced to Balanced Line Combiner The TX-LC2 is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed a balanced (or unbalanced) audio line.

Mfr Name: Radio Design Labs

Mfr Number: TX-LC2

555-18848 - 70 And 100V Outupts 20W Audio Power Amplifier

20 W Mono Audio Amplifier - 70 V or 100 V The FP-PA20A features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommoda...

Mfr Name: Radio Design Labs

Mfr Number: FP-PA20A

555-18870 - 2X4 Photo Jacks Stereo Audio Distributor

Stereo Audio Distribution Amplifier - 2x4 - RCA jacks The RU-UDA4 performance is tailored around industry standard -10 dBV input/output levels. Excellent frequency response, phase response, low-distortion and low-noise performance combine to produce the audi...

Mfr Name: Radio Design Labs

Mfr Number: RU-UDA4

555-18812 - 50Db Gain Microphone Preamplifier

50 dB Gain Microphone Preamplifier The STM-1 is a low-cost quality microphone preamplifier designed for use in commercial sound and broadcast applications. The compact size makes it ideal where a larger or heavier preamp cannot be used. The high-performance ...

Mfr Name: Radio Design Labs

Mfr Number: STM-1

555-18898 - Mic Level 1X3 Mic Distribution Amplifier

1X3 Microphone Level Distribution Amplifier The STM-DA3 is designed for use in quality commercial sound, broadcast and recording applications.

Mfr Name: Radio Design Labs

Mfr Number: STM-DA3

555-18912 - Audio Routing Switcher - 1X2

Audio Routing Switcher The ST-RX2 has a single line-level audio input and two line-level audio outputs.

Mfr Name: Radio Design Labs

Mfr Number: ST-RX2

555-18888 - 300 Hz And 500Hz High Pass Filter

High Pass Filter - 300 Hz and 500 Hz The ST-HP3 is the ideal choice where line-level audio filtering needs to be provided at the input of a power amplifier for protection of public address horns against damage from low frequencies.

Mfr Name: Radio Design Labs

Mfr Number: ST-HP3

555-18842 - Message Repeater

Message Repeater The FP-MR2 is a message repeater that permits electronic storage of a single recording up to one minute forty seconds in duration. This message may be played back manually using an external contact closure to ground or using the front-panel ...

Mfr Name: Radio Design Labs

Mfr Number: FP-MR2

555-18858 - Three Band Equalizer

Three Band Audio Equalizer with Knobs The RU-EQ3 features a balanced bridging input, which may be connected unbalanced if desired. The output driver is 150 O balanced, and is intended to drive unbalanced or balanced lines of 150 O or higher impedance.

Mfr Name: Radio Design Labs

Mfr Number: RU-EQ3

555-18934 - Balanced To Unbalanced Dual Audio Converter

Dual Audio Converter - Balanced to Unbalanced The TX-A2D is the ideal choice in installations requiring passive isolation and level attenuation between a professional balanced line-level stereo source and consumer equipment unbalanced inputs.

Mfr Name: Radio Design Labs

Mfr Number: TX-A2D

555-18910 - Stereo Phono Preamplifier

Stereo Phono Preamplifier The ST-PH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The ST-PH1 has standard 47 k? impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable o...

Mfr Name: Radio Design Labs

Mfr Number: ST-PH1

555-18894 - 35~75Db Gain High Gain Mic Preamp

High Gain Microphone Preamplifier - 35 to 75 dB gain The STM-3 is a quality low-noise microphone preamplifier designed for use in surveillance, commercial sound, broadcast, and recording where higher than normal gain is required.

Mfr Name: Radio Design Labs

Mfr Number: STM-3

555-18840 - Chime Generator

Chime Generator With 8 Electronic Chimes The FP-CH8 is an electronic chime generator that produces eight different synthesized chimes. Each chime can consist of up to 3 tones and 3 harmonics selected to produce sonically natural effects. Certain chimes are s...

Mfr Name: Radio Design Labs

Mfr Number: FP-CH8

555-18828 - 1X4 Rear Panel Outputs Headphone Distribution Amp

1X4 Headphone Distribution Amplifier Rear Panel Outputs The EZ-HDA4B contains four stereo headphone amplifiers with individual front-panel volume controls. Headphone outputs are provided on rear-panel MINI jacks. One stereo input signal feeds all the amplifie...

Mfr Name: Radio Design Labs

Mfr Number: EZ-HDA4BX

555-18890 - Use With Vca Loudne Equalizer

Loudness Equalizer The ST-LEQ1 has two line-level audio inputs and a single line-level audio output. The audio signal to be equalized connects to the EQ INPUT. If it is desired to mix an unprocessed source with the output signal, this second source is connec...

Mfr Name: Radio Design Labs

Mfr Number: ST-LEQ1

555-18820 - Stereo 1X4 Audio Distribution Amplifier

1X4 Stereo Audio Distribution Amplifier The EZ-ADA4 is a stereo audio distribution amplifier with gain adjustment and audio level metering. The input is connected through RCA jacks or a MINI jack. A front-panel knob adjusts for high or low input levels using ...

Mfr Name: Radio Design Labs

Mfr Number: EZ-ADA4X

555-18918 - 3 X 1 Mic Or Line Universal Audio Mixer

3x1 Universal Audio Mixer The ST-UMX3 is a three-channel audio mixer for combining mic-level or line-level signals to a single output.

Mfr Name: Radio Design Labs

Mfr Number: ST-UMX3