Search results for Project Accessories

80-1545 - Amp Power Supply Kit

This small power supply provides a regulated voltage adjustable between 1.5 and 35V at 1A. The regulator provides remarkably better ripple and regulation characteristics than conventional regulators. Current limiter and thermal overload protection are included in ...

Mfr Name: Velleman SA

Mfr Number: K1823

83-13135 - Arduino ProtoShield Bare PCB and Components

The Proto Shield Kit allows you to move your projects from a breadboard to an Arduino-compatible PCB. Included are a number of common components.

Mfr Name: Arduino

Mfr Number: A000025

83-13136 - Getting Started with Arduino Book

This valuable little book offers a thorough introduction to the open-source electronics prototyping platform that's taking the design and hobbyist world by storm. Getting Started with Arduino gives you lots of ideas for projects and helps you get going on them rig...

Mfr Name: Arduino

Mfr Number: A000035

21-11155 - Dri-box 285 Outdoor Waterproof/Weatherproof Box- Black

Provides a high quality, portable weatherproof connection box for a variety of applications. Weatherproof and waterproof making it useful for outdoor lighting, maintenance or other applications. Hinged clamp mechanism can be opened or closed in 1 second allowing...

Mfr Name: Distributed By MCM

Mfr Number: 285 BLACK

22-11365 - 12 x 3mm Rare Earth Magnet - Pack of 6

Rare earth magnets can be used for a variety of applications around the house, at the shop or in the classroom. Ideal for use in a variety of audio speaker applications and in computer hard drives. They have been nickel plated for added durability.

Mfr Name: Duratool

Mfr Number: TL14070

28-970 - Project Box - 3 5/16'' x 5 11/16'' x 2''

Gray plastic boxes with slots inside to hold PC boards Lid with hardware included Measurements are inside dimensions

Mfr Name: Distributed By MCM

Mfr Number: PX-3G

28-1725 - AC Fan - 4 5/8'' x 1 1/2'' Ball Bearing

Bi-Sonic 119MM AC Fan Requires AC power cord Heavy duty metal body

Mfr Name: Distributed By MCM

Mfr Number: AC-4EB

102-155 - Jumper Wire Kit

Jumper Wire KitContains 350 lengths of pre-stripped, pre-formed #22 solid wire in various colors. 14 different lengths of 25 pieces each. Contained in a large 14 compartment plastic case.

Mfr Name: Elenco

Mfr Number: JW-350

28-740 - Piezo Electronic Buzzer - 35mm

Operating voltage: 3~28VDC Rated maximum current: 20mA Sound output level: Minimum 85dB at 10cm Resonant Frequency: 4.7~0.5 KHz

Mfr Name: Distributed By MCM

Mfr Number: 28-740

28-18355 - Philips Drywall Screws - #6 x 1''

Popular for use in cabinet and speaker enclosure assembly Sharp "stinger type" point requires no pilot hole Black oxide finish 100 per box

Mfr Name: Distributed By MCM

Mfr Number: E0001-000N

80-1520 - Mono LED VU Meter Kit

These VU meters come with 10 LED scale, adjustable input and light bar display. Also comes with two front panels for horizontal and vertical mounting. Power supply: 10~15VDC/110~250mA. Input sensitivity: Low input: 150mV~6V RMS, high input: 1.5V~60V RMS. M...

Mfr Name: Velleman SA

Mfr Number: K4304

28-1730 - DC Fan - 1 9/16'' x 3/4'' Ball Bearing

Bi-Sonic 40MM DC Fan 12" Wire leads

Mfr Name: Distributed By MCM

Mfr Number: BP402012M

28-11076 - Screw and Anchor Kit Includes 1/4" Masonry Drill Bit

Ideal for Satellite and Cable installations, this kit includes 100 pieces of both 1/4" plastic anchors and screws and a 1/4" masonry drill bit conveniently packaged in a plastic carry case.

Mfr Name: Distributed By MCM

Mfr Number: 28-11076

83-11329 - 120X120X25MM Case Fan Green

"RoHs compliant 12VDC Fluid Bearing Fans Connector: Three pin Noise level: Mounting screws included All fans have 25mm depth "

Mfr Name: Distributed By MCM

Mfr Number: EGF-12

21-4578 - Solder PC Bread Board 2-1/2" X 3-1/4"

Compact Prototype BreadboardPrefect for a variety of custom design and prototype applications. Boards are predrilled with solder pad holes at 0.10" spacing.See the matching prototype box designed for this board.

Mfr Name: Distributed By MCM

Mfr Number: 21-4578

555-14532 - Rubber Foot with Metal Washer - 1 1/2" Diameter x 1 1/2" Thickness

Provide traction and stability to your equipment, as well as protect the surface the equipment is sitting on with these rubber feet. Includes metal washer Dimensions: 1 1/2" (Diameter) x 1 1/2" (Thickness) Sold individually

Mfr Name: Penn Elcom

Mfr Number: 9145

28-11026 - SNAPTOGGLE (Type BB) Heavy-Duty 1/4"-20 Toggle Bolts - 50pk

Ideal for mounting flat-panel TVs Strong-up to 2x the load of an old-fashioned wing toggle Solid metal channel resists vibration & shock Save time-at least 6 minutes per anchor v. wing toggles (can use a screw gun; anchor does not spin) Save money-turn ...

Mfr Name: Distributed By MCM

Mfr Number: 25014