MCM Electronics

Search results for Robotics

251 Products Found Sort By
Product Detail Availability Buy
Image of Pololu Robotics & Electronics 2366 75:1  MICRO METAL GEAR MOTOR   STALL TORQUE @ 6V 17 OZ-IN

3

28-17674 - 75:1 Micro Metal Gear Motor Stall Torque @ 6V 17 Oz-in

This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 75:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.Key specs at 6 V: 290 RPM and 40 mA free-run, 17 oz-in ...

Mfr Name: Pololu Robotics & Electronics

Mfr Number: 2366

In Stock

$15.49

Buy Now
Image of Pololu Robotics & Electronics 2202 30:1 MICRO METL MOTOR EX SHFT  STALL TORQUE @ 6V 4 OZ-IN

3

28-17689 - 30:1 Micro Metl Motor EX Shft Stall Torque @ 6V 4 Oz-in

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 30:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. This version also has a 4.5 x 1 mm extend...

Mfr Name: Pololu Robotics & Electronics

Mfr Number: 2202

In Stock

$16.49

Buy Now
Image of Pololu Robotics & Electronics 1327 ORANGUTAN SVP-1284             ROBOT CONTROLLER ASSEMBLED

3

28-17698 - Orangutan Svp-1284 Robot Controller Assembled

The Orangutan SVP-1284 robot controller is a super-sized version of the popular Orangutan SV, with a built-in AVR ISP programmer, more I/O lines, and more regulated power, and more memory. Based on the new ATmega1284P AVR microcontroller (128 KB flash, 16 KB RAM, ...

Mfr Name: Pololu Robotics & Electronics

Mfr Number: 1327

In Stock

$94.99

Buy Now
Image of Adafruit Industries 154 Continuous Rotation Servo

3

28-17459 - Continuous Rotation Servo

This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with one horn only, as shown

Mfr Name: Adafruit Industries

Mfr Number: 154

In Stock

$13.89

(MSRP: $14.00)
Buy Now
Image of Pololu Robotics & Electronics 2365 50:1  MICRO METAL GEAR MOTOR   STALL TORQUE @ 6V 13 OZ-IN

3

28-17673 - 50:1 Micro Metal Gear Motor Stall Torque @ 6V 13 Oz-in

This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 50:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.Key specs at 6 V: 420 RPM and 40 mA free-run, 13 oz-in ...

Mfr Name: Pololu Robotics & Electronics

Mfr Number: 2365

In Stock

$15.49

Buy Now
Image of OSEPP LS-1006A SERVO - METAL GEAR ANALOG      SERVO

3

83-15279 - Servo - Metal Gear Analog Servo

Wire Definitions: Black (-) Red (+) Yellow (signal) • Same as Hitec wire configuration Brown (-) Red (+) Orange (signal) • Same as JR Wire Configuration

Mfr Name: Osepp

Mfr Number: LS-1006A

In Stock

$19.99

(MSRP: $21.95)
Buy Now
Image of Pololu Robotics & Electronics 1095 250:1 MICRO METAL GEAR MOTOR   STALL TORQUE @ 6V 32 OZ-IN

3

28-17686 - 250:1 Micro Metal Gear Motor Stall Torque @ 6V 32 Oz-in

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, low-current motor with 250:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.Key specs at 6 V: 50 RPM and 30 mA fre...

Mfr Name: Pololu Robotics & Electronics

Mfr Number: 1095

In Stock

$15.49

Buy Now
Image of Pololu Robotics & Electronics 2204 100:1 MICRO METL MOTOR EX SHFT STALL TORQUE @ 6V 12 OZ-IN

3

28-17691 - 100:1 Micro Metl Motor EX Shft Stall Torque @ 6V 12 Oz-in

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 100:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. This version also has a 4.5 x 1 mm exten...

Mfr Name: Pololu Robotics & Electronics

Mfr Number: 2204

In Stock

$16.49

Buy Now
Image of Pololu Robotics & Electronics 1090 42X19MM WHEEL SET              WITHOUT ENCODER

3

28-17694 - 42x19mm Wheel SET Without Encoder

This custom-designed white plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our micro and 15.5D metal gearmotors as well as the Solarbotics metal gear motors. Teeth on the hub optionally allow a reflec...

Mfr Name: Pololu Robotics & Electronics

Mfr Number: 1090

In Stock

$6.99

Buy Now
Image of Adafruit Industries 412 Small Push-Pull Solenoid

3

28-17451 - Small Push-Pull Solenoid

Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull (from one end) or ...

Mfr Name: Adafruit Industries

Mfr Number: 412

In Stock

$9.49

(MSRP: $9.95)
Buy Now
Image of Pololu Robotics & Electronics 999 10:1  MICRO METAL GEAR MOTOR   STALL TORQUE @ 6V 4 OZ-IN

3

28-17656 - 10:1 Micro Metal Gear Motor Stall Torque @ 6V 4 Oz-in

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 10:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.Key specs at 6 V: 3000 RPM and 120 mA free-...

Mfr Name: Pololu Robotics & Electronics

Mfr Number: 999

In Stock

$15.49

Buy Now
Image of Pololu Robotics & Electronics 992 100:1 MICRO METAL GEAR MOTOR   STALL TORQUE @ 6V 12 OZ-IN

3

28-17683 - 100:1 Micro Metal Gear Motor Stall Torque @ 6V 12 Oz-in

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 100:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.Key specs at 6 V: 120 RPM and 40 mA free-...

Mfr Name: Pololu Robotics & Electronics

Mfr Number: 992

In Stock

$15.49

Buy Now
Image of Pololu Robotics & Electronics 2203 50:1 MICRO METL MOTOR EX SHFT  STALL TORQUE @ 6V 7 OZ-IN

3

28-17690 - 50:1 Micro Metl Motor EX Shft Stall Torque @ 6V 7 Oz-in

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 50:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. This version also has a 4.5 x 1 mm extend...

Mfr Name: Pololu Robotics & Electronics

Mfr Number: 2203

In Stock

$16.49

Buy Now
Image of Pololu Robotics & Electronics 1336 WIXEL WIRELESS MODULE          USB ASSEMBLED

3

28-17702 - Wixel Wireless Module USB Assembled

The Pololu Wixel is a general-purpose programmable module featuring a 2.4 GHz radio and USB. You can write your own software or load precompiled, open-source apps onto the TI CC2511F32 microcontroller at the heart of the Wixel, turning it into a wireless serial li...

Mfr Name: Pololu Robotics & Electronics

Mfr Number: 1336

In Stock

$19.99

Buy Now
Image of OSEPP LS-0003 SERVO - PLASTIC GEAR ANALOG    SMALL

3

83-15277 - Servo - Plastic Gear Analog Small

Wire Definitions: Black (-) Red (+) Yellow (signal) • Same as Hitec wire configuration Brown (-) Red (+) Orange (signal) • Same as JR Wire Configuration

Mfr Name: Osepp

Mfr Number: LS-0003

In Stock

$8.49

(MSRP: $8.95)
Buy Now
Previous   1 2 3 4 5 ... 17 Next