Search results for Speaker Distribution

50-13050 - Crescendo™ Four Source Four Zone CAT5 Audio Distribution Hub

Four source, four zone interface acts as the central hub for the A-BUS distributed audio system. Entire system may be controlled from each zone, via separately available keypads, and multiple systems may be interfaced together, allowing additional zones. Interface...

Mfr Name: Channel Vision

Mfr Number: P-2044

50-6695 - 72W Stereo-to-Mono Mixer

Stereo-to-Mono Mixer This isolation transformer allows a single speaker to be simultaneously connected to two amplifier channels, while maintaining isolation between those two channels. Power capacity: 72W RMS total both channels combined Input and output conne...

Mfr Name: Audioplex Technology

Mfr Number: MONOMIXER 200

50-2204 - Multi Room Speaker Distribution Strip

Multi Room Speaker Distribution Panel Essential for distributed residential sound installations, this terminal strip provides a convenient method of connecting numerous pairs of speakers to a single pair of binding posts. Internal PC board circuit is reinforced w...

Mfr Name: MCM Custom Audio

Mfr Number: 50-2204

50-13440 - Connection Strip For Six Stereo Speaker Pairs

Allows for connection of up to six speaker pairs to a single amplifierRemovable screw terminal strips accept up to 14AWG wireAttached mounting plate allows this to be easily mounted to a wall, or installed in most structured wiring panelsDimensions: 6½" (L) x 2" ...

Mfr Name: Knoll Systems

Mfr Number: WT6

50-6696 - 100W Stereo-to-Mono Mixer

Stereo-to-Mono Mixer This isolation transformer allows a single speaker to be simultaneously connected to two amplifier channels, while maintaining isolation between those two channels. Power capacity: 100W RMS total both channels combined Input and output conn...

Mfr Name: Audioplex Technology

Mfr Number: MONOMIXER 300

50-13110 - Single Source Distribution Module for A-BUS Audio Distribution Systems

Designed for use in any A-BUS distributed environment, this module provides line level input connection, and acts as the IR hub, providing four emitter outputs. A-BUS system output is provided via female RJ45 jack, and IR status is available via 12VDC input connec...

Mfr Name: Channel Vision

Mfr Number: AB-202

50-13035 - IR Distribution Coax Engine Receiver

Individual IR engine components are useful when installing a custom IR system in an old-work or retrofit installation. The IR target includes the matching coax engine, allowing the IR signal to be inserted into the RG59/U or RG6/U coax. The IR coax engine is sold ...

Mfr Name: Channel Vision

Mfr Number: IR-4101

50-13029 - IR Distribution Coax Engine With Power Supply

Individual IR engine components are useful when installing a custom IR system in an old-work or retrofit installation. The IR coax engine includes the necessary AC adaptor and features a 3.5mm female connector, for use with any Channel Vision IR emitter, allowing ...

Mfr Name: Channel Vision

Mfr Number: IR-4000

50-13039 - IR Distribution Bypass Cable

Allows signal from any standard RF modulator to be injected directly onto a digital cable feed, without the need for additional filters.

Mfr Name: Channel Vision

Mfr Number: IR-4180

50-13040 - Crescendo™ One Source Four Zone CAT5 Audio Distribution Hub

Single source, four zone interface acts as the central hub for the A-BUS distributed audio system. Entire system may be controlled from each zone, via separately available keypads, and multiple systems may be interfaced together, allowing additional zones. Interfa...

Mfr Name: Channel Vision

Mfr Number: P-2014

50-13140 - A-BUS 4 Zone Panel Distribution Module

Designed for installation Channel Vision Structured Wiring Panels, this module accepts source input from any A-BUS interface device and provides outputs for up to four keypad zones. Multiple modules may be cascaded for additional zones. Requires 24VDC power supply...

Mfr Name: Channel Vision

Mfr Number: AB-404

50-13150 - A-BUS Audio Distribution System Kit - Single Source Four Zone

Complete package provides virtually everything needed to install a single source, four zone distributed audio system, and is designed for installation in any of Channel Visions Structured Wiring Panels. Entire system may be controlled from each zone, via include s...

Mfr Name: Channel Vision

Mfr Number: AB-902

50-13170 - Complete 4-Source 4-Zone A-BUS Distributed Audio Kit

Complete package provides virtually everything needed to install a four source, four zone distributed audio system. A single gang decora keypad in each zone provides independent source selection, IR remote control and volume adjustment within that zone. Keypads co...

Mfr Name: Channel Vision

Mfr Number: AB-904

50-2202 - Multi Room Speaker Distribution Strip

Multi Room Speaker Distribution Strip Designed for multi room sound distribution installations where individual speaker selection is not required. Impedance protection circuit allows up to eight sets of 8ohm speakers to be connected to a stereo amplifier, and app...

Mfr Name: MCM Custom Audio

Mfr Number: 50-2202

50-13120 - A-BUS Universal Input Module

Designed for use in any A-BUS distributed environment, this module provides line level input connection. This unit may be connected to the input of any A-BUS hub, to act as a standard source input. It may also be located in an individual zone, and connected betwee...

Mfr Name: Channel Vision

Mfr Number: AB-301W

50-13100 - Amplified Keypad for A-BUS Audio Distribution System - White Decora

Designed for use in any A-BUS distributed environment, this keypad can be used to expand an existing system or as a component in a custom package. Standard single gang device is compatible with decora devices and includes white cover plate.

Mfr Name: Channel Vision

Mfr Number: AB-124