MCM Electronics

Search results for Wearable LEDs

Refine Your Search

  • Include special order items
  • Show in stock items only
48 Products Found Sort By
  1234 Next
Product Detail Availability Buy
Image of Adafruit Industries 1509 Trinket 3V and 5V 6 Pack

3

28-18045 - Trinket 3V and 5V 6 Pack

Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost e...

Mfr Name: Adafruit Industries

Mfr Number: 1509

In Stock

$35.00

(MSRP: $47.70)
Buy Now
Image of Adafruit Industries 653 CR2032 Sewable Battery Holder

3

28-18145 - CR2032 Sewable Battery Holder

This battery holder is by far the easiest way to add a battery to a small wearable project. By coincidence, there are two small 1mm diameter holes in the metal connection tabs, just large enough for a #5 or smaller needle to pass through. One tab connects to commo...

Mfr Name: Adafruit Industries

Mfr Number: 653

In Stock

$1.99

Buy Now
Image of Adafruit Industries 727 3 X AAA Battery Holder with JST-PH Cable

3

28-18140 - 3 X AAA Battery Holder with JST-PH Cable

This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-of...

Mfr Name: Adafruit Industries

Mfr Number: 727

In Stock

$1.99

Buy Now
Image of Adafruit Industries 1131 20 JST-PH Male to Female Extension Cable

3

28-18150 - 20" JST-PH Male to Female Extension Cable

Extension cord for any JST-terminated battery packs (such as LiIon/LiPoly and 3 x AAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of color coded wire. Handy for wearable projects where you may want the batte...

Mfr Name: Adafruit Industries

Mfr Number: 1131

In Stock

$2.05

Buy Now
Image of Adafruit Industries 258 1200mAh 3.7V Li-Poly Battery with JST-PH cable

3

28-18130 - 1200mAh 3.7V Li-Poly Battery with JST-PH cable

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. The batteries come pre-attached with a ...

Mfr Name: Adafruit Industries

Mfr Number: 258

In Stock

$9.99

Buy Now
Image of Adafruit Industries 1501 Trinket 5V Arduino Controller

3

28-18040 - Trinket 5V Arduino Controller

Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost e...

Mfr Name: Adafruit Industries

Mfr Number: 1501

In Stock

$7.71

(MSRP: $7.95)
Buy Now
Image of Adafruit Industries 1756 5 Pack Emerald LED Sequins

3

28-19910 - 5 Pack Emerald LED Sequins

Sew a little sparkle into your wearable project with an Adafruit LED Sequin. These are the kid-sister to our popular Flora NeoPixel, they only show a single color and they don't have digital control, but that makes them smaller easier to use for many projects.

Mfr Name: Adafruit Industries

Mfr Number: 1756

In Stock

$3.49

(MSRP: $3.95)
Buy Now
Image of Adafruit Industries 1657 Gemma Wearable LED's Starter Pack

3

28-19895 - Gemma Wearable LED's Starter Pack

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder (batteries not included,) 2-ply conductive thread, alligator clips to hel...

Mfr Name: Adafruit Industries

Mfr Number: 1657

In Stock

$26.99

(MSRP: $29.95)
Buy Now
Image of Adafruit Industries 1304 5V USB Li-Poly Battery Charger

3

28-18125 - 5V USB Li-Poly Battery Charger

This is a tiny LiPo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are...

Mfr Name: Adafruit Industries

Mfr Number: 1304

In Stock

$5.99

Buy Now
Image of Adafruit Industries 1222 Gemma Arduino Wearable Controller

3

28-18055 - Gemma Arduino Wearable Controller

Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board with a lot of might in a 1" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project!

Mfr Name: Adafruit Industries

Mfr Number: 1222

In Stock

$9.95

Buy Now
Image of Adafruit Industries 1500 Trinket 3.3V Arduino Controller Module

3

28-18035 - Trinket 3.3V Arduino Controller Module

Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost e...

Mfr Name: Adafruit Industries

Mfr Number: 1500

In Stock

$7.71

(MSRP: $7.95)
Buy Now
Image of Adafruit Industries 659 Flora Arduino Wearable Controller

3

28-18050 - Flora Arduino Wearable Controller

The FLORA is small (1.75" diameter, weighing 4.4 grams). We wanted the smallest possible board for our wearable platform. In the FLORA family we also have the best stainless steel threads, sensors, GPS modules and chainable LED pixels, perfect accessories for the ...

Mfr Name: Adafruit Industries

Mfr Number: 659

In Stock

$24.19

(MSRP: $24.95)
Buy Now
Image of Adafruit Industries 640 75' 2 Ply Conductive Sewable Thread for Flora

3

28-18115 - 75' 2 Ply Conductive Sewable Thread for Flora

After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll quickly agree its optimal for any wearables wor...

Mfr Name: Adafruit Industries

Mfr Number: 640

In Stock

$6.17

Buy Now
Image of Adafruit Industries 1405 Flora Budget Sewable Starter Pack

3

28-18080 - Flora Budget Sewable Starter Pack

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make your first wearable electronic project. There's a Flora motherboard, four ultra-bri...

Mfr Name: Adafruit Industries

Mfr Number: 1405

In Stock

$45.31

Buy Now
Image of Adafruit Industries 1849 Gemma Wearable LED's Sensor Starter Pack

3

28-19900 - Gemma Wearable LED's Sensor Starter Pack

Go interactive with sensors and Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic sensing project (or two). There's a GEMMA board, four sewable bright RGB pixels, a motion sensor, a switch, a light sensor, a piezo, a rech...

Mfr Name: Adafruit Industries

Mfr Number: 1849

In Stock

$39.99

(MSRP: $44.95)
Buy Now
  1 2 3 4 Next