MCM Electronics

Fluke-113 True RMS Utility MultimeterMCM Part #: 105-735  |  Fluke Part #: FLUKE-113

No reviews yet!
Login to rate or review this product

The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems.

With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.

Product Description

  • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
  • True-rms for accurate ac measurements on non-linear loads
  • A large backlit display allows for easy visibility in low-lit areas
  • Record signal fluctuations using the Min/Max function
  • Diode test for testing general-purpose germanium, silicon, and power diodes
  • Integral holster with probe holders for easy storage
  • Auto and Manual ranging for added user functionality
  • Perform diode tests
  • Min/Max function lets you record signal fluctuations
  • Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety
  • The optional TPAK magnetic hanger allows the user hands-free flexibility

Specifications:

Specifications
VCHEK1,2,3 Range 6.000 V / 60.00 V / 600.0 V
Resolution 0.001 V / 0.01 V/ 0.1 V
Accuracy DC, 45 to 500 Hz: 2.0% + 3
500 Hz to 1 kHz: 4.0% + 3
Diode test4 Range 2.000 V
Resolution 0.001 V
Accuracy 2.0 % + 3
Continuity4 Accuracy Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer
?4 Range 600.0 Ω / 6.000 kΩ / 60.00 kΩ
Resolution 0.1 Ω / 0.001 kΩ / 0.01 kΩ
Accuracy 0.9 % + 2 / 0.9 % + 1 / 0.9 % + 1
Capacitance4 Range 1000 nF / 10.00 μF / 100.0 μF / 9999 μF
Resolution 1 nF / 0.01 μF / 0.1 μF / 1 μF
Accuracy 1.9 % + 2
100 μF - 1000 μF: 1.9 % + 2
1000 μF: 5 % + 20

Notes:

1 All VChek voltage ranges are specified from 60 counts to 100 % of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.

2 Crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale.

3 Minimum measureable input in VCHEK autorange is 3 V dc. For measurements below 3 V dc, push Range button twice to get to 6 V dc manual range.

4 After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.

Specifications
Maximum voltage between any terminal and earth ground 600 V
Display 3 3/4-digits, 6000 counts, updates 4/sec
Operating temperature -10 °C to 50 °C (14 °F to 122 °F)
Storage temperature -40 °C to 60 °C (-22 °F to 140 °F)
Temperature coefficient 0.1 x (specified accuracy)/°C (< 18 °C or > 28 °C)
Operating altitude 2,000 m
Storage altitude 10,000 m
Relative humidity 95 % to 30 °C
75 % to 40 °C
45 % to 50 °C
Battery type 9 Volt Alkaline, ANSI 1604A / IEC 6F22
Battery life Alkaline: 300 hours typical, without backlight
Shock 1 Meter drop per IEC 61010-1-2001
Vibration Per MIL-PRF-28800 for Class 2 instrument
Size (HxWxL) 167.1 mm X 85.1 mm X 46.0 mm (6.58 in X 3.35 in X 1.81 in)
Weight 13.0 oz (404 g)
Safety Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 61010-1 (2004) and IEC/EN 61010-1 2nd Edition for measurement Category IV, 600 V, Pollution Degree 2, EMC EN61326-1
EMI regulations Complies with FCC Part 15, Class B
Specifications
VCHEK Input Impedance (Nominal) ~3 kΩ < 300 pF
VCHEK Common Mode Rejection Ratio
(1 kΩ Unbalanced)
> 60 dB at dc, 50 or 60 Hz
Ω Open Circuit Test Voltage < 2.7 V dc
Full Scale Voltage < 0.7 V dc
Diode test Open Circuit Test Voltage 2.7 V dc
Full Scale Voltage 2.000 V dc
Ω Short Circuit Current < 350 μA
Diode test Short Circuit Current < 1.0 mA

 

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Associated Products

Image of TPAK ToolPak Meter Hanging Kit

105-275 - TPAK ToolPak Meter Hanging Kit

The magnetic Fluke TPAK solves almost any hanging and positioning problem you may face. The universal hanger allows you to hang your meter on nails, hooks and many other objects.

In Stock

$39.99

Buy Now
Image of SureGrip Electrical Test Lead Set

105-448 - SureGrip Electrical Test Lead Set

Superior gripping surface made from thermoplastic rubber Improved ergonomics New design makes clips, hooks, and probes more versatile All SureGrip™ accessories are rated CAT III 1000V and CAT IV 600V

In Stock

$74.95

Buy Now

Others Also Bought

Image of Fluke 114 True-RMS Multimeter

105-650 - Fluke 114 True-RMS Multimeter

Designed for easy one-hand operation, the Fluke 114 True RMS digital multimeter is the perfect troubleshooting tool for “go/no go testing. Its AutoVolt capability automatically switches to measure AC or DC voltage, whichever is present. The LoZ function helps iden...

In Stock

$149.95

Buy Now
Image of 50 Ft 22 AWG Stranded Hook-Up Wire

24-550 - 50 Ft 22 AWG Stranded Hook-Up Wire

Hook-Up Wire, Type: Stranded, Color: Black, Length: 50 feet, Gauge: 22

In Stock

$2.79

Buy Now
Image of Handheld Digital Multimeter with Transistor Test and Temperature

72-10390 - Handheld Digital Multimeter with Transistor Test and Temperature

A reliable, no-nonsense multimeter in a palm-sized design. Measures AC/DC voltage, DC current, resistance, and temperature.

In Stock

$16.99

Buy Now
Package Specifications & Dimensions
Weight:1.6 lbs.
Hazardous:No
Warranty:90 days
Need to Return?
Length:11 in.
Width:6.25 in.
Height:3.5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 1226

MCM Cat 56, Page 1066

PDF Reference
Datasheet

Requires Adobe Acrobat Reader.

Mfr. Info

Fluke Logo
Mfr. Name:Fluke
Mfr. Part Number:FLUKE-113