MCM Electronics

Fluke-113 True RMS Utility Multimeter By Fluke (FLUKE-113) MCM Part #105-735

0 stars No reviews yet
$129.95 
& FREE Shipping

Specifications Top

The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems.

With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.

  • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
  • True-rms for accurate ac measurements on non-linear loads
  • A large backlit display allows for easy visibility in low-lit areas
  • Record signal fluctuations using the Min/Max function
  • Diode test for testing general-purpose germanium, silicon, and power diodes
  • Integral holster with probe holders for easy storage
  • Auto and Manual ranging for added user functionality
  • Perform diode tests
  • Min/Max function lets you record signal fluctuations
  • Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety
  • The optional TPAK magnetic hanger allows the user hands-free flexibility

Specifications:

Specifications
VCHEK1,2,3 Range 6.000 V / 60.00 V / 600.0 V
Resolution 0.001 V / 0.01 V/ 0.1 V
Accuracy DC, 45 to 500 Hz: 2.0% + 3
500 Hz to 1 kHz: 4.0% + 3
Diode test4 Range 2.000 V
Resolution 0.001 V
Accuracy 2.0 % + 3
Continuity4 Accuracy Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer
?4 Range 600.0 Ω / 6.000 kΩ / 60.00 kΩ
Resolution 0.1 Ω / 0.001 kΩ / 0.01 kΩ
Accuracy 0.9 % + 2 / 0.9 % + 1 / 0.9 % + 1
Capacitance4 Range 1000 nF / 10.00 μF / 100.0 μF / 9999 μF
Resolution 1 nF / 0.01 μF / 0.1 μF / 1 μF
Accuracy 1.9 % + 2
100 μF - 1000 μF: 1.9 % + 2
1000 μF: 5 % + 20

Notes:

1 All VChek voltage ranges are specified from 60 counts to 100 % of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.

2 Crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale.

3 Minimum measureable input in VCHEK autorange is 3 V dc. For measurements below 3 V dc, push Range button twice to get to 6 V dc manual range.

4 After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.

Specifications
Maximum voltage between any terminal and earth ground 600 V
Display 3 3/4-digits, 6000 counts, updates 4/sec
Operating temperature -10 °C to 50 °C (14 °F to 122 °F)
Storage temperature -40 °C to 60 °C (-22 °F to 140 °F)
Temperature coefficient 0.1 x (specified accuracy)/°C (< 18 °C or > 28 °C)
Operating altitude 2,000 m
Storage altitude 10,000 m
Relative humidity 95 % to 30 °C
75 % to 40 °C
45 % to 50 °C
Battery type 9 Volt Alkaline, ANSI 1604A / IEC 6F22
Battery life Alkaline: 300 hours typical, without backlight
Shock 1 Meter drop per IEC 61010-1-2001
Vibration Per MIL-PRF-28800 for Class 2 instrument
Size (HxWxL) 167.1 mm X 85.1 mm X 46.0 mm (6.58 in X 3.35 in X 1.81 in)
Weight 13.0 oz (404 g)
Safety Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 61010-1 (2004) and IEC/EN 61010-1 2nd Edition for measurement Category IV, 600 V, Pollution Degree 2, EMC EN61326-1
EMI regulations Complies with FCC Part 15, Class B
Specifications
VCHEK Input Impedance (Nominal) ~3 kΩ < 300 pF
VCHEK Common Mode Rejection Ratio
(1 kΩ Unbalanced)
> 60 dB at dc, 50 or 60 Hz
Ω Open Circuit Test Voltage < 2.7 V dc
Full Scale Voltage < 0.7 V dc
Diode test Open Circuit Test Voltage 2.7 V dc
Full Scale Voltage 2.000 V dc
Ω Short Circuit Current < 350 μA
Diode test Short Circuit Current < 1.0 mA

 

Part Numbers
MCM Part #:105-735
Fluke Part #:FLUKE-113
Package Specifications & Dimensions
Weight:1.6 lbs.
Hazardous:No
Warranty:90 days
Need to Return?
Length:11 in.
Width:6.25 in.
Height:3.5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No

Product Reviews Top

Associated Products

Image of SureGrip Industrial Test Lead Set

105-446 - SureGrip Industrial Test Lead Set

Superior gripping surface made from thermoplastic rubber Improved ergonomics New design makes clips, hooks, and probes more versatile All SureGrip™ accessories are rated CAT III 1000V and CAT IV 600V

On Backorder(Expected in 21 days)

$69.99

Buy Now
Image of VoltAlert™ 90-1000V AC Volt Detector 5 Pack

105-750 - VoltAlert™ 90-1000V AC Volt Detector 5 Pack

Always-on, easy to use voltage detector is ideal for use at home or for commercial use. This non-contact voltage detector detects voltage from 90V to 1000V AC. Tip glows red when voltage is present.

On Backorder(Expected in 21 days)

$119.95

Buy Now

Others Also Bought

Image of DeoxIt Rosin Soldering Flux Jar - 2 Oz

200-385 - DeoxIt Rosin Soldering Flux Jar - 2 Oz

The DeoxIt Rosin Soldeing Flux permits soldering of even difficult metals such as brass or nickel.

In Stock

$7.49

Buy Now