MCM Electronics

Mini SMD PreheaterMCM Part #: 21-10135  |  Tenma Part #: 21-10135

Mini SMD Preheater 4.4 stars from 4 ratings and 3 reviews.
Login to rate or review this product

The 21-10135 packs big preheating power into a miniature package for work or rework of small PCB’s. The 540 watt heater can reach up to 662°F in 10 seconds. Automatic and intelligent temperature control maintains accurate heat levels for any period of time. The unit can also help cool boards after rework.

Product Description

  • Lead free and ROHS compliant
  • ESD safe
  • Air flow volume: 6.35 cubic ft/minute
  • Temperature range: 212~662°F (100~350°C)
  • Dimensions: 6.7” x 5.5” x 2.2”

  • Product Reviews

    • "Mini SMD Preheater" by Rollin on 1/30/2013
      Overall: 5 out of 5
      Value:
      Quality:

      Mini SMD Preheater review

    • "Good tool for smaller SMD rework jobs" by wb0rxx on 12/6/2012
      Overall: 4 out of 5
      Value:
      Quality:

      While not the fanciest preheater around, this device works well. The internal construction is much better quality than a lot of imported tools and test equipment. Temperature control seems to be fairly tight with little hysteresis. The only flaw in this unit are the two magnetic holders. They provide little support for holding a PC board in place while manipulating SMD components. It is fairly easy to improve these holders by sanding the plastic base flat and then gluing some thin rubber pads to it. I used amalgamating tape for the rubber pads. I also added a couple of small SmCo magnets to the existing magnets to increase the magnetic hold. These simple changes made the clamps far more usable.

    • "SMD" by accutv on 12/3/2011
      Overall: 3.5 out of 5
      Value:
      Quality:

      It's nearly impossible to remove ICs with back-side heatsinks unless you heat the PC board from both sides. This moderately priced tool makes it possible. The magnetic PC board holders are rather flimsy and don't provide much support. However, for the price, you can't beat this handy little gadget.

    • Rate It!

      Login Here to rate and review this product.

    Associated Products

    Image of 60W Compact Digital Soldering Station

    21-10115 - 60W Compact Digital Soldering Station

    This compact soldering station features a digital display and low profile casing. Its compact design will fit on any tool bench and is small enough for convenient storage. The efficient, thermostat-controlled, 60-watt output of this unit provides almost in...

    On Backorder(Expected in 16 days)

    $59.99

    Buy Now
    Image of Hot Air Rework Station

    21-10125 - Hot Air Rework Station

    The 21-10125 Hot Air Rework Station provides a wide range of temperature and temperature settings for flexibility in soldering and desoldering work of sensitive components. A closed-loop heat sensor provides accurate and consistent working temperature.

    Limited Stock

    $149.99

    Buy Now
    Image of SMD Remover Kit

    21-3450 - SMD Remover Kit

    Safely removes SMDs using low heat. Fast andeasy to use. Heat can be appliedwith a soldering iron, warm air preheater, or heatgun. The SMD is easily removed with tweezers ora pick-up tool.

    In Stock

    $16.99

    Buy Now
    Image of SMD Soldering/Desoldering Tweezers

    21-8230 - SMD Soldering/Desoldering Tweezers

    Provides a fast, efficient method to solder and desolder surface mount devices such as chip resistors, chip capacitors,SOTs, flat pack and DIP ICs Dual highly insulated 40W ceramic heating elements insure rapid heat up and recovery Wide variety of interchangeable ...

    In Stock

    $29.99

    Buy Now
    Image of No Lead SMD Removal Kit

    21-8530 - No Lead SMD Removal Kit

    Safely removes SMDs using low heat Heat can be applied with a soldering iron, warm air preheater, or heat gun The SMD is easily removed with tweezers or a pick-up tool Works equally well on lead and lead-free PCBs RoHS compliant Kit includes: Lead-free rem...

    In Stock

    $15.99

    Buy Now

    Others Also Bought

    Image of Universal Television Stand, For Televisions 32

    50-14795 - Universal Television Stand, For Televisions 32" ~ 60"

    Universal Television Stand Perfect for flat panel televisions that were mounted to the wall, but are to be moved to tabletop use. Universal mounting plate attaches to all VESA standard sets from 200x200 through 600x400, and provides a secure and attractive mount...

    In Stock

    $59.99

    Buy Now
    Image of Equipment Wall Bracket - Adjustable Length

    50-14780 - Equipment Wall Bracket - Adjustable Length

    White Equipment Wall Bracket Designed for supporting microwave ovens from the wall, this bracket is ideal for any type of equipment.

    In Stock

    $12.99

    Buy Now
    Image of Heavy Duty Laptop / Projector Presentation Stand

    555-11690 - Heavy Duty Laptop / Projector Presentation Stand

    Heavy Duty Laptop / Projector Stand The design of this versatile, heavy duty stand makes it not only great for holding sheet music, but holding a laptop or projector for presentation purposes as well. Also available with Larger Tray

    In Stock

    $29.99

    Buy Now
    Package Specifications & Dimensions
    Weight:2.69 lbs.
    Hazardous:No
    RoHS Comp:No
    Warranty:365 days
    Need to Return?
    Length:10 in.
    Width:6.5 in.
    Height:4 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages
    Catalog/Page:

    MCM Cat 57, Page 1146

    MCM Cat 56, Page 974

    PDF Reference

    Requires Adobe Acrobat Reader.

    Mfr. Info

    Tenma Logo
    Mfr. Name:Tenma
    Mfr. Part Number:21-10135