MCM Electronics

Solder Fume ExtractorMCM Part #: 21-7960  |  Tenma Part #: 21-7960

Solder Fume Extractor 4.8 stars from 4 reviews.
Login to rate or review this product

Solder Fume Extractor
Electronic solders typically contain rosin–resin compounds and lead, which when heated may create noxious fumes. Prolonged exposure to these fumes is considered potentially harmful and may create health problems including headaches, nausea and eye irritation. The Tenma Solder Fume Extractor greatly reduces this hazard by effective removing these problem fumes from the air.

Product Description

  • Highly efficient fan
  • Activated carbon filter
  • Fully adjustable stand
  • ESD safe construction
  • Unit includes one filter
  • Replacement filters available in Two-Packs

    Specifications:
  • Absorption capacity: One cubic foot per minute
  • Power requirements: 117VAC 60Hz, 23W
  • Filter dimensions: 5.1" (H) x 5.1" (W) x 0.4" (D)
  • Overall dimensions: 10.6" (H) x 8.7" (W) x 6.6" (D)

  • Product Reviews

    • "At last, I can solder at the kitchen table." by ventifact on 1/18/2012
      Overall: 5 out of 5
      Value:
      Quality:

      I was having to solder on the back porch until I found the Tenma-21-7960. Partner approved, I'm very pleased.

    • "Fume extractor" by jimh on 10/27/2011
      Overall: 5 out of 5
      Value:
      Quality:

      Does what it is supposed to do. Relatively quiet, but needs to be within a foot or less of the soldering area to really be effective.

    • "Tenma Solder Fume Extractor Review" by dicksevier on 10/1/2010
      Overall: 4 out of 5
      Value:
      Quality:

      This is not a perfect fume extractor but may be the best value out there. I found the inlet vortex would throw fumes to the right side of the unit, so am contemplating putting a baffle on the that side to keep fumes entrained. At $35 or so, this is a very good value. You'd proabably have to spend 2-3X for something better. Noise level is moderate but not too objectionable, too. Overall construction is very sturdy and well made. I submitted a You Tube video of its performance...

    • "It sucks just as advertised" by rnfritz on 3/9/2010
      Overall: 5 out of 5
      Value:
      Quality:

      These work nicely if you are doing more than just occasional soldering. Less expensive than others I've seen, but they work just as well.

    • Rate It!

      Login Here to rate and review this product.

    Associated Products

    Image of 150W Soldering Pot

    21-3511 - 150W Soldering Pot

    Compact soldering pots are ideal for small scale production, prototyping and chassis wiring. They are especially useful when tinning large quantities of stranded wire. Recommended for use with the Tenma #72-6309 bar solder

    In Stock

    $29.99

    Buy Now
    Image of Solder Aid Kit

    21-665 - Solder Aid Kit

    •Six piece kit includes heat sink, self-closing tweezers, small Phillips screwdriver, brush/scraper, pointed/slotted probe and curved point/scraper

    On Backorder(Expected in 23 days)

    $5.49

    Buy Now
    Image of Heavy Duty Cleaning Pin

    94-425 - Heavy Duty Cleaning Pin

    Precision swivel handle makes this tool quick and easy to use. Designed for cleaning tips on Hakko desoldering tools.

    On Backorder(Expected in 12 days)

    $21.99

    Buy Now

    Others Also Bought

    Image of Double Sided Foam Tape

    28-955 - Double Sided Foam Tape

    •Thousands of uses •Fasten accessories to car dash, etc. •3/4" x 61/2' roll

    In Stock

    $4.19

    Buy Now
    Image of VHS Head Cleaner

    80-6875 - VHS Head Cleaner

    VCR Head Cleaner safely and effectively cleans tape heads and entire tape path Non-abrasive Exclusive cleaning material prevents debris from re-depositing on heads Wet type

    In Stock

    $8.99

    Buy Now
    Package Specifications & Dimensions
    Weight:4.06 lbs.
    Hazardous:No
    Warranty:365 days
    Need to Return?
    Length:11 in.
    Width:11 in.
    Height:7.5 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages
    Catalog/Page:

    MCM Cat 57, Page 1160

    MCM Cat 56, Page 975

    Mfr. Info

    Tenma Logo
    Mfr. Name:Tenma
    Mfr. Part Number:21-7960