Wiha® precision single Phillips screwdriver in #0 x 50mm size.
I work on laptops that use a range of very small torx and philips screws. I often have to buy tools rated at smaller sizes to be able to fit properly into screws, it's as though there's no standard for these small screws. Wiha is a good brand and I have a personal micro bit set of my own in my bag, set 75992. This screwdriver was ordered along with other sizes to see what fit what. This wiha PH0. Tool steel is very good quality, and the tip is reasonably fine for the screws it needs to work with. This driver specifically works well on the fine screws in Apple laptops. The palm spinner on the end has a little more friction than I like, and I can't remove the cap to add a little oil like I do with my craftsman tools, but that's a minor issue compared to the rest of the tool. I've had very good experiences with WIha tools and this tool meets my expectations of them. This tool fits screws the same as the lower quality Craftsman PH000 that I have replaced with this.
22-2809 - 3.5 x 60mm Precision Single Slotted Screwdriver
Precision Single Slotted Screwdrivers
22-4405 - Blue Mechanic's Tool Bag
This handy "Mechanic's Tool Bag" is similar to the GI tool bag used for decades by the U.S. Military. Platt's water-repellant Cordura fabric makes it much more durable. With eight sewn-in pockets on the inside and two divided snap pouches on the ou...
27390 - Precision ESD Safe Slotted/Phillips Screwdriver Set
Set includes: Four slotted (1.5 x 40mm, 2.0 x 50mm, 2.5 x 50mm, 3.5 x 60mm) and three Phillips (#00 x 40mm, #0 x 50mm, #1 x 60mm) Precison control with finger tip rotation cup ESD safe comfortable tapered handle for rapid rotation Hardened ...
21-6960 - Reztore Topical Anti-static Surface and Mat Cleaner
Ideal for cleaning static dissipative mats, conductive mats, computer monitors, and keyboards.
22-575 - Needle Nose Pliers 4-1/2"
PLIERS NEEDLE NOSE 4-1/2 Pliers, Type: Mini Needle Nose, Length: 4 1/2 , Material: Drop Forged Steel, Features: Serrated jaws for secure grip, return spring & has cushioned grip
108-4054 - Soldering Probe/Spudger/Pry Tool
The handy tool that frequently comes in handy. It can be used as a probe, scrapers, or spudger while soldering because of it's high heat tolerance. It can also be used to pry open laptops, iPods, cell phones, and other electronics without marking up the casing.
I have been dealing with MCM for over 30 years now. If I didn't like the service I'd would have found a different supplier 30 years ago. For most of my needs they are the 1st stop on my shopping list.