Y Cable, XLR3F to Dual XLR3M - 18"
This cable is designed to connect an XLR output to two XLR inputs. It is ideal for assigning the signal from a microphone to two channels on a mixing console.
I used this cable to convert my 2way stereo/3way mono crossover to 2way mono for my side fills on stage. Works perfectly does not degrade signal. In fact it was the first time that we were told we had too much bass!
Login Here to rate and review this product.
24-12158 - 3' ¼" TRS Male to Dual ¼" TS Male Audio Insert Cable
Insert Cable, 1/4" TRS to Dual 1/4" TS - 1M This cable is designed to connect a channel insert on a mixing console to an effects processor with unbalanced phone jacks. Leads are labeled TIP (send) and RING (return) to aid in identification.
24-12162 - 3' ¼" RA TRS Male to Dual RA TS ¼" Male Audio Insert Cable
Insert Cable, Right-Angle 1/4" TRS to Dual Right-Angle 1/4" TS - 1M This cable is designed to connect a channel insert on a mixing console to an effects processor with unbalanced phone jacks. Right-angle plugs allow easy access to jacks with minimal clearance.
24-12169 - 5' Microphone Cable - XLR3F to RA 3.5mm TS
Microphone Cable, XLR3F to Right-Angle 3.5MM TS - 5'This cable is designed to a connect a microphone with an XLR output to a mini mono phone input. It is ideal for connecting a pro mic to a DV camera, mini audio mixer, or portable audio recorder.
24-12218 - 10Ft Pro MIDI Cable 5-pin DIN To Same
Pro MIDI Cable, Serviceable 5-pin Din to Same - 10'This cable is designed to interconnect MIDI devices. It is wired 5-pin discrete and compatible with all MIDI standards, including SysEx.
24-12204 - 18" Y Cable Dual XLR3F To XLR Male
Y Cable, Dual XLR3F to XLR3M - 18"This cable is designed to connect two XLR outputs to one XLR input. It may be used to connect two microphones to one channel on a mixing console when a second channel is unavailable.
55-2953 - 15" Woofer with Paper Cone and Cloth Surround - 200W RMS at 8ohm
15" Paper Cone Woofer
Low cost general replacement woofer is ideal in a two way cabinets or as a subwoofer. It is perfect for prosound applications and is ideal in ported or sealed enclosures.,/p>
Also available in 4Ohm Version
24-12205 - Y Cable XLR3F To Dual XLR Male
Y Cable, XLR3F to Dual XLR3MThis cable is designed to connect an XLR output to two XLR inputs. It is ideal for assigning the signal from a microphone to two channels on a mixing console.
MCM Cat 57, Page 593
MCM Cat 56, Page 603
I have been doing business with MCM for years and always had great service.