MCM Electronics

RG-59 Male Crimp-On BNC ConnectorMCM Part #: 27-425  |  Distributed By MCM Part #: 27-425

RG-59 Male Crimp-On BNC Connector 2.3 stars from 3 reviews.
Login to rate or review this product

  • BNC Type Connector
  • Cable type RG-59
  • Male crimp-on
  • Minimum 10
  • Use with 22-20950 die set and 22-20920 frame
  • Product Reviews

    • "Works Great" by thillman on 3/28/2011
      Overall: 5 out of 5

      This is the best BNC crimp-on ever. I use an Ideal Crimpmaster with a 30-581 Die set and it works great.

    • "Doesn't Work" by drowinski on 2/16/2010
      Overall: 1 out of 5

      MCM should remove this item unless they can supply a corresponding crimp tool. It detracts from their otherwise good reputation. I contacted MCM before writing this review. The crimp tool recommended was part # 22-925. It does not work. I will reiterate the words of OldHud – “This item is useless”. If anyone else wants to try it on RG59, I’ll send you one. Otherwise, try Part # 27-2860.

    • "Can't assemble" by OldHud on 10/1/2007
      Overall: 1 out of 5

      I an clueless as to how this connector is assembled. There are no MCM crimp tools that will crimp the ferrule. Maybe one of the expensive, branded tools with replaceable dies has the right size die to crimp the ferrule, but that doesn't matter. If you do crimp the ferrule, it isn't small enough to clamp an RG-59 cable to the connector body. There is also no way to attach the center pin, either. A crimp tool would need jaws less than .050" thick - not likely. Soldering isn't feasible; the pin fits against the cable center insulation. Maybe I'm missing something, but there are no instructions to help. This item is useless.

    • Rate It!

      Login Here to rate and review this product.

    Associated Products

    Image of 10

    22-20920 - 10" Euro Crimp Tool - Frame Only

    Euro crimp tool crimps insulated terminals up to 10AWG and non-insulted terminals up to 8AWG. A wide variety of crimp dies available for “F”, BNC, TNC, SMB, SMA and “N” series connectors. Also Compatible with die sets from other popular crimp tools. This part...

    In Stock


    Buy Now
    Image of Die Set for Coax BNC/TNC 3 Piece - For 22-20920

    22-20950 - Die Set for Coax BNC/TNC 3 Piece - For 22-20920

    Replacement die set for 10" Euro crimp tool (MCM #22-20920). Used for Coax BNC/TNC 3 piece.

    In Stock


    Buy Now
    Image of 10 Ft 75 ohm BNC Patch Cables

    24-1620 - 10 Ft 75 ohm BNC Patch Cables

    Molded strain reliefs to ensure long life. Male BNC connectors on each end. Perfect for use with professional video equipment and closed circuit television (CCTV) applications.

    In Stock


    Buy Now
    Image of Male BNC to male RCA

    27-400 - Male BNC to male RCA

    BNC-Male to RCA-Male Adapter - Individual

    In Stock


    Buy Now
    Image of Female RCA to male BNC

    27-405 - Female RCA to male BNC

    BNC-Male to RCA-Female Adapter - Individual Female RCA to male BNC adapter Connect RCA composite video cable to a BNC monitor Knurled design makes it easy to connect and disconnect

    In Stock


    Buy Now
    Image of Mini Coax Stripper

    33-9715 - Mini Coax Stripper

    Portable and handy, this mini coax stripper makes it easy to handle coax cable in any of your applications where cable stripping is needed.

    In Stock


    Buy Now

    Others Also Bought

    Image of Large PC Board

    21-4585 - Large PC Board

    Large PC board has 2,036 holes for multiple connections and connected traces. Board measures 51/2" x 45/16" x 3/32"

    In Stock


    Buy Now
    Image of USB A MAle to Female Right Angle Up Adapter

    83-13198 - USB A MAle to Female Right Angle Up Adapter

    L-com's UADAA90 series low profile right angle USB adapters are perfect for tight fit applications. Two exit options are available allowing cables to exit in opposite directions. Our UADAA90 series USB adapters are a much lower cost solution when compared to rotat...

    In Stock


    Buy Now
    Package Specifications & Dimensions
    Weight:0.026 lbs.
    Warranty:90 days
    Need to Return?
    Length:4 in.
    Width:3 in.
    Height:0.5 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages

    MCM Cat 57, Page 615

    MCM Cat 56, Page 549

    Mfr. Info

    Distributed By MCM Logo
    Mfr. Name:Distributed By MCM
    Mfr. Part Number:27-425