This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 10:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.
Key specs at 6 V: 3000 RPM and 120 mA free-run, 4 oz-in (0.3 kg-cm) and 1.6 A stall.
These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 - 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in a wide range of gear ratios-from 5:1 up to 1000:1-and offer a choice between three different motors: high-power (HP), medium-power (MP), and standard. With the exception of the 1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change.Some versions of the gearmotors are sold with an additional 1mm-diameter output shaft that protrudes from the rear of the motor. This 4.5mm-long rear shaft rotates at the same speed as the input to the gearbox and offers a way to add a custom-built encoder to provide motor speed or position feedback.Full range of motors available
Login Here to rate and review this product.
21-1046 - Lead Free Rosin Core Solder - Tin / Copper - 6OZ.
Ideal for general purpose electronic repair and assembly use. Tin/copper formulation meets current requirements for lead free solder use.
27-435 - Female BNC to female BNC Adaptor
Connect two BNC male to male cables together
Perfect for extending a cable run
BNC female to female coupler
102-032 - GMA Fuse Kit
Assortments of popular electronic fuses Packaged in convenient storage boxes #102-032 contains: GMA (10 each): .5A, 1A, 1.5A, 1.6A, 2A, 2.5A, 3A, 3.15A, 4A, 5A, 6A and 6.5A UL listed fuses
MCM Cat 57, Page 747