MCM Electronics

6 1/2'' Two-Way 70V Ceiling Speaker with Ported Enclosure - 120WMCM Part #: 50-14075  |  MCM Custom Audio Part #: 50-14075

6 1/2'' Two-Way 70V Ceiling Speaker with Ported Enclosure - 120W 4.5 stars from 2 reviews.
Login to rate or review this product

Enclosed ceiling speaker is ideal for residential or commercial distributed audio systems. Front located port provides increased bass response and overall sound quality.

  • Sold individually

Product Description

  • 6 ½” poly cone woofer with rubber surround
  • Directional 1” titanium dome tweeter
  • Fully sealed ABS back box
  • Binding post speaker terminals
  • Power capacity: 60W/120W RMS/max
  • Frequency response: 60Hz~20KHz
  • SPL: 89dB
  • Transformer taps: 8ohm, 0.25W, 0.5W, 1W, 2.5W, 5W, 7.5W, 15W, 30W (rotary switch)
  • 25V/70V switch
  • Mounting depth: 5.5”
  • Required cutout: 9.5”
  • Overall frame diameter: 11”

Product Reviews

  • "Great Speaker - Needs a ceiling tile bridge" by dixongarym on 8/19/2013
    Overall: 5 out of 5
    Top 25 Contributor

    Excellent sound and easy to install for the price. My only complaint is that MCM should have a recommended tile bridge to fit this speaker - the 8" speaker bridges are just a bit too small.

  • "Bought for sealed enclosure feature" by shinwhite on 6/28/2011
    Overall: 4 out of 5

    Got a pair of these on sale for installing in 14 foot long soffit enclosure wall over kitchen cabinets. We didnt want to tear out the soffit just to build some kind of enclosure for typical in-wall speakers These MCM branded things fit the bill since the backs of these coaxially mounted drivers are sealed in a solid molded plastic enclosure. Small rotary dial on the speaker baffle allows various settings for 70V operation or simple transformerless 8 ohm operation as with a typical AVR. The dial on one of the two was not perfectly aligned with printout, had to check with meter before hooking up to Yamaha AVR. Installation was a little tricky as the unthreaded plastic mounting tabs were hard to drive the screws into. "Pre-screwing" the screws in and out of the cheap plastic tabs one time BEFORE mounting is recommended to make them go in easily once the speakers are placed in the wall. Provided jig and instructions were helpful. Also comes with a handy little wire puller to remove grills from mounted speakers if needed. Had no problem getting 16 AWG wire in the spring loaded clips. Drivers themselves look cheap and coaxial mounting was sloppy. Sound was fine for noisy kitchen environment though, these are probly not intended for close listening anyway. Not bad for the money.

  • Rate It!

    Login Here to rate and review this product.

Others Also Bought

Image of Double Sided Foam Tape

28-955 - Double Sided Foam Tape

•Thousands of uses •Fasten accessories to car dash, etc. •3/4" x 61/2' roll

In Stock


Buy Now
Image of 10MM Headphones White High Performance Earbud

35-5155 - 10MM Headphones White High Performance Earbud

High Performance Earbud Headphones White Lightweight, stylish, high performance earbuds give crystal clear sound as well as a comfortable fit. Ideal for use with CD, MP3, MP4 and any other small portable audio players.

In Stock


Buy Now
Image of VHS Head Cleaner

80-6875 - VHS Head Cleaner

VCR Head Cleaner safely and effectively cleans tape heads and entire tape path Non-abrasive Exclusive cleaning material prevents debris from re-depositing on heads Wet type

In Stock


Buy Now
Package Specifications & Dimensions
Weight:6.09 lbs.
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:11.5 in.
Width:11.25 in.
Height:6.75 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages

MCM Cat 57, Page 136

MCM Cat 56, Page 008

PDF Reference

Requires Adobe Acrobat Reader.

Mfr. Info

MCM Custom Audio Logo
Mfr. Name:MCM Custom Audio
Mfr. Part Number:50-14075
You deserve some post tax day relief
Save 15% on your order using promo code TXD504