MCM Electronics

8'' Two-Way 70V Ceiling Speaker with Ported Enclosure - 180WMCM Part #: 50-14080  |  MCM Custom Audio Part #: 50-14080

8'' Two-Way 70V Ceiling Speaker with Ported Enclosure - 180W 4.1 stars from 4 reviews.
Login to rate or review this product

Enclosed ceiling speaker is ideal for residential or commercial distributed audio systems. Front located port provides increased bass response and overall sound quality.

  • Sold individually

Product Description

  • 8” poly cone woofer with rubber surround
  • Directional 1” titanium dome tweeter
  • Fully sealed ABS back box
  • Binding post speaker terminals
  • Power capacity: 90W/180W RMS/max
  • Frequency response: 40Hz~20KHz
  • SPL: 89dB
  • Transformer taps: 8ohm, 0.25W, 0.5W, 1W, 2.5W, 5W, 7.5W, 15W, 30W (rotary switch)
  • 25V/70V switch
  • Mounting depth: 5.5
  • Required cutout: 11.25”
  • Overall frame diameter: 12.5”

Product Reviews

  • "Not to crazy about the grills" by RJ Electronics LLC on 2/8/2014
    Overall: 4 out of 5

    I have installed upwords of 30 of these speakers in various 70vt apps, they are beautiful speakers have good flexability and sound good,, not very happy withe mounting clamps, and diffinenly with the mounting grilles they are a bear to reinstall, after having to change the taps from the front, especially when you get used to mounting ceiling speakers that have magnetic grilles, I diffvintly recommend them but be careful if you are schuled to do a upcomming job the packaging sucks I have have 4 packed to a box of wich the bezles have been broken in shipping which means having to ship them back wait new ones to arrive and then wait for credit, otherwise I highly recommend them

  • "Pleasantly Surprized" by troyc1 on 5/19/2013
    Overall: 4.5 out of 5

    I installed 6 of these speakers along with the MCM 555-4925 70v amp for a whole house audio install.. Very good sound and build quality for the price. I will start with the few cons, firstly 1 speaker was cracked from what appears to be over tightening from the factory, I was going to send it back for replacement but its unnoticeable with the grill on and speaker sounds fine. Second con is the mounting ears are too tight and the screw heads are soft, making them strip pretty easily, an easy fix for both of these is to run the mounting ears up and down a few times before mounting so you can hold the ear in the slot and use an appropriate length drywall screw in place of the factory screw if needed. PLEASE NOTE: don't lets these little cons scare you away from these speakers, I install pro audio for a living and can tell you that I've seen the exact problems and worse with very expensive top of the line brand speakers.

  • "Great sound, tricky installation!" by rkosty on 12/14/2012
    Overall: 5 out of 5

    Yes, these do sound great and they are very sensitive, only need low power amp to sound great. BUT! I found that , as another rater said, the screw clamps are tricky. The threads are very tight so I ended up running each screw in and out once to sort of break them in, then they went in easily. Also, the hole template is about 1/2" too big, My cutout ended up almost too big, so cut the hole smaller and trim it out as needed. Price can't be beat either but remember to order two!!

  • "good enough sound quality for the money, janky installation" by suryadesign on 12/6/2012
    Overall: 3 out of 5

    i'm using these speakers in 8 ohm mode and they sound good enough for $25 a pop. however, installation was tricky as the screw clamps were poorly designed. if you plan to use them, i recommend removing the excess glue around the screw clamps first. also, cut away the excess plastic on the screw clamp before installing them into a wall/ceiling, do a dry run first and you'll see what i mean--the clamp gets misaligned and crushed, then binds up in the guide.

  • Rate It!

    Login Here to rate and review this product.

Others Also Bought

Image of Universal Television Stand, For Televisions 32

50-14795 - Universal Television Stand, For Televisions 32" ~ 60"

Universal Television Stand Perfect for flat panel televisions that were mounted to the wall, but are to be moved to tabletop use. Universal mounting plate attaches to all VESA standard sets from 200x200 through 600x400, and provides a secure and attractive mount...

In Stock


Buy Now
Image of Bracket Pole Mount VESA75/100

50-14534 - Bracket Pole Mount VESA75/100

Pole Mount Bracket for LCD Monitors Rugged bracket fits any 30mm ~ 60mm diameter pole, whether positioned horizontally or vertically. Great for use with PA speaker and light stands, lighting and stage trusses, and support masts. Pivoting mechanism allows monito...

In Stock


Buy Now
Image of Equipment Wall Bracket - Adjustable Length

50-14780 - Equipment Wall Bracket - Adjustable Length

White Equipment Wall Bracket Designed for supporting microwave ovens from the wall, this bracket is ideal for any type of equipment.

In Stock


Buy Now
Package Specifications & Dimensions
Weight:7.6 lbs.
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:13.25 in.
Width:13 in.
Height:7 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages

MCM Cat 57, Page 136

MCM Cat 56, Page 008

PDF Reference

Requires Adobe Acrobat Reader.

Mfr. Info

MCM Custom Audio Logo
Mfr. Name:MCM Custom Audio
Mfr. Part Number:50-14080