MCM Electronics

Bnc Composite Video Ground Loop IsolatorMCM Part #: 50-14525  |  MCM Custom Audio Part #: GB600

No reviews yet!
Login to rate or review this product

BNC Ground Loop Isolator

The Video Ground Loop Isolator is a passive device that can reduce Ground Loop Interference with composite video signals. It is used in situations where video signals are being transmitted between points with different ground potentials. Unbalanced power line loads typically cause differences in ground potentials.

Product Description

This should be installed where cable runs between/within buildings are fed from different power sources. It must be installed at the camera end of the circuit. All cameras powered from such power sources must be fitted with Ground Loop Isolators to prevent ground loops.

  • BNC male to BNC female with 150mm mini coax on both sides
  • Passive, no power required
  • Prevents video signal distortion caused by video ground loops
  • Built in TVS (Transient Voltage Suppressor) for surge protection

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Others Also Bought

Image of HDTV 80 Mile Deep Fringe Bowtie Television Antenna

30-2430 - HDTV 80 Mile Deep Fringe Bowtie Television Antenna

Dual Quad Bay Outdoor UHF/HDTV Bowtie Antenna High gain outdoor directional antenna is engineered to receive UHF signals for digital and high definition television. Bowtie design provides wider pickup pattern. Adjustable horizontal boom allows vertical sections t...

In Stock

$39.99

Buy Now
Image of Rosin Core Solder - 60/40 Tin/Lead - 1LB

21-1040 - Rosin Core Solder - 60/40 Tin/Lead - 1LB

Rosin Core Solder(one pound) Ideal for general purpose electronic repair and assembly use. Tin/lead formulation provides the lowest possible melting point.

In Stock

$23.09

Buy Now
Image of 1000Ft RG-G/U Coax Cable CCS 18AWG 60% Aluminum Braid Black

24-10206 - 1000Ft RG-G/U Coax Cable CCS 18AWG 60% Aluminum Braid Black

1000' RG-6/U coaxial cable with 18AWG copper covered steel, mylar foil and 60% aluminum braid providing 100% shield coverage. Sweep tested to 2250MHz. Polyethylene dielectric and PVC jacket. OD .275" nominal. Impedance: 75ohm nominal. Sequential foot marking every...

In Stock

$59.99

Buy Now
Package Specifications & Dimensions
Weight:0.2205 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:90 days
Need to Return?
Length:4.724 in.
Width:4.331 in.
Height:1.575 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 226

MCM Cat 56, Page 090

Mfr. Info

MCM Custom Audio Logo
Mfr. Name:MCM Custom Audio
Mfr. Part Number:GB600