This high quality dome tweeter is perfect for repair, upgrade, or new speaker construction, and is ideal for pro sound cabinets.
I had hoped to use these for my bass cabinets from here on out, but I've recently discovered that I won;t be able to. I build my cabinets with 1.5" thick baffles, and these will only work with a .75" baffle or less. Because of the terminal notches hanging off the magnet, in order to install these, you must cut notches into your cutout to accommodate them. Because the notches hang directly under the screwholes, you must turn the horn once you've installed it, otherwise your screws will have nowhere to screw into, and you'll have an air leak. This is impossible in my situation because the baffles I use are too thick.
These probably sound pretty good, and are probably a great deal, but if you build your cabs like I build mine, these are a no-go. I'll probably pop them in some floor monitors and post a proper review then, I just wanted to get this out these so people know.
Login Here to rate and review this product.
LS00385 - Acoustic Wadding Material
Made of white polyester fiber, this is perfect for internal speaker enclosure dampening, this wadding provides the perfect solution to eliminating problematic low frequency internal resonance. This material is a must for any speaker building or upgrade pro...
55-2953 - 15" Woofer with Paper Cone and Cloth Surround - 200W RMS at 8ohm
15" Paper Cone Woofer
Low cost general replacement woofer is ideal in a two way cabinets or as a subwoofer. It is perfect for prosound applications and is ideal in ported or sealed enclosures.,/p>
Also available in 4Ohm Version
53-1210 - 1.35'' Threaded Titanium Compression Tweeter Driver - 100W RMS
This low cost compression driver is perfect for most two way applications.
Perfect for use with a wide variety of horn lens styles
100W/200w RMS/Peak power capacity
1.35" voice coil
Sensitivity: 100dB (W/M)
MCM Cat 57, Page 179
MCM Cat 56, Page 306
Requires Adobe Acrobat Reader.