MCM Electronics

1.35'' Threaded Titanium Compression Tweeter Driver - 100W RMSMCM Part #: 53-1210  |  MCM Audio Select Part #: 53-1210

1.35'' Threaded Titanium Compression Tweeter Driver - 100W RMS 4.5 stars from 1 review.
Login to rate or review this product

This low cost compression driver is perfect for most two way applications.

  • Perfect for use with a wide variety of horn lens styles
  • 15oz. magnet
  • 100W/200w RMS/Peak power capacity
  • Titanium dome
  • 1.35" voice coil
  • 15oz. magnet
  • Sensitivity: 100dB (W/M)
  • Impedance: 8ohm
  • Re: 6.3ohm
  • Frequency response: 1.5KHz~20KHz
  • Overall diameter: 3.54"

Product Reviews

  • "impressive results" by jchristopher on 10/24/2011
    Overall: 4.5 out of 5
    Value:
    Quality:

    I had a pair old Peavey 112 cabinets with blown horns originally using Peavey 22XT drivers crossing over at 1200hz with constant directivity compensation. I decided to give MCM a chance rather than spend $50 each on the original diaphrams. I replaced the drivers with the 200watt 1.35 inch compression driver, I wasn't expecting much for a $10 part but I am incredibly suprised. They have been used in small to medium size venues 4 nights a week for karaoke and I'm driving these things with a 525 rms/channel AB 1100a power amp and they're taking it. The sound is clear, possibly better than the original drivers. The only thing of note that the SPL senstivity of these drivers are lower than the original horns so I have to EQ the high end up slightly to compensate for the crossover dropping it down.... excellent value. I've since used the 400 watt version in my SP-5TI's as well putting them more on par with my SP-5XT which has the higher power 44XT driver.

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of Gold Plated Speaker Terminals - Square

50-1275 - Gold Plated Speaker Terminals - Square

High powered speaker terminals for use with heavy—duty speaker wire Made of high—quality plastic construction Gold plated binding post Available in round, square and rectangular bi—wire with bridge

In Stock

$2.39

Buy Now
Image of ABS Midrange / Tweeter Horn Lens - Threaded - 4.5

54-800 - ABS Midrange / Tweeter Horn Lens - Threaded - 4.5" x 4.5"

ABS Compression Horn Lens Metal-threaded horn lens, ideal for enclosure-repair or new speaker construction.

In Stock

$5.49

Buy Now
Image of ABS Midrange / Tweeter Horn Lens - Threaded - 5.7

54-805 - ABS Midrange / Tweeter Horn Lens - Threaded - 5.7" x 5.7"

ABS Compression Horn Lens Metal-threaded horn lens, ideal for enclosure-repair or new speaker construction.

In Stock

$6.29

Buy Now
Image of ABS Midrange / Tweeter Horn Lens - Threaded - 7.2

54-815 - ABS Midrange / Tweeter Horn Lens - Threaded - 7.2" x 7.2"

ABS Compression Horn Lens Metal-threaded horn lens, ideal for enclosure-repair or new speaker construction.

In Stock

$13.99

Buy Now
Image of ABS Midrange / Tweeter Horn Lens - Threaded - 3.5

54-820 - ABS Midrange / Tweeter Horn Lens - Threaded - 3.5" x 15"

ABS Compression Horn Lens Metal-threaded horn lens, ideal for enclosure-repair or new speaker construction.

In Stock

$10.99

Buy Now
Image of ABS Midrange / Tweeter Horn Lens - Threaded - 6.5

54-825 - ABS Midrange / Tweeter Horn Lens - Threaded - 6.5" x 15"

ABS Compression Horn Lens Metal-threaded horn lens, ideal for enclosure-repair or new speaker construction.

In Stock

$5.79

Buy Now
Image of ABS Midrange / Tweeter Horn Lens - Threaded - 7

54-840 - ABS Midrange / Tweeter Horn Lens - Threaded - 7" x 14"

ABS Compression Horn Lens Metal-threaded horn lens, ideal for enclosure-repair or new speaker construction.

In Stock

$6.39

Buy Now
Image of Acoustic Dampening Pad

LS00916 - Acoustic Dampening Pad

Perfect for internal speaker enclosure dampening, this wadding provides the perfect solution to eliminating problematic low frequency internal resonance. Made from 2/3 sheeps wool and 1/3 polyester fiber, this material is a must for any speaker building or...

In Stock

$6.39

Buy Now

Others Also Bought

Image of Universal Television Stand, For Televisions 32

50-14795 - Universal Television Stand, For Televisions 32" ~ 60"

Universal Television Stand Perfect for flat panel televisions that were mounted to the wall, but are to be moved to tabletop use. Universal mounting plate attaches to all VESA standard sets from 200x200 through 600x400, and provides a secure and attractive mount...

In Stock

$59.99

Buy Now
Image of Equipment Wall Bracket - Adjustable Length

50-14780 - Equipment Wall Bracket - Adjustable Length

White Equipment Wall Bracket Designed for supporting microwave ovens from the wall, this bracket is ideal for any type of equipment.

In Stock

$12.99

Buy Now
Image of Heavy Duty Laptop / Projector Presentation Stand

555-11690 - Heavy Duty Laptop / Projector Presentation Stand

Heavy Duty Laptop / Projector Stand The design of this versatile, heavy duty stand makes it not only great for holding sheet music, but holding a laptop or projector for presentation purposes as well. Also available with Larger Tray

In Stock

$29.99

Buy Now
Package Specifications & Dimensions
Weight:2.05 lbs.
Hazardous:Yes
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:6 in.
Width:6 in.
Height:4 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 173

MCM Cat 56, Page 300

PDF Reference
Datasheet

Requires Adobe Acrobat Reader.

Mfr. Info

MCM Audio Select Logo
Mfr. Name:MCM Audio Select
Mfr. Part Number:53-1210