MCM Electronics

4'' Square Midrange OEM Replacement By MCM Audio Select (100-3601M01) MCM Part #54-295

5 stars 4 reviews
Qty.Volume Price

Popular OEM replacement for Sansui, Sanyo, Fisher, Curtis Mathes and many other speaker systems. Copper voice coil on ASV former provides above average power capacity.

Specifications Top

  • Magnet weight: 3.6 oz
  • Voice coil diameter: 0.56"
  • Impedance: 8ohm
  • Power capacity: 50W RMS
  • Sensitivity: 94dB (W/M)
  • Frequency response: 700Hz ~ 10KHz
  • Fs: 700Hz
  • Re: 6.4ohm
  • Le (1KHz): 0.77mH
  • Qms: 3.86
  • Qes: 6.56
  • Qts: 2.43


  • Overall frame: 4.72" x 4.72"
  • Rquired cutout: 3.72" diamter
  • Overall depth: 1.51"
  • Mounting holes: Square pattern. 3.78" x 3.78"
    Part Numbers
    MCM Part #:54-295
    MCM Audio Select Part #:100-3601M01
    Package Specifications & Dimensions
    Weight:0.758 lbs.
    Warranty:90 days
    Need to Return?
    Length:5.125 in.
    Width:5.25 in.
    Height:2 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages
    MCM Cat 57, Page 171
    MCM Cat 56, Page 298
    View in Catalog
  • Product Reviews Top

    • by

      on 7/9/2014


      Overall: 5 out of 5

      I ordered a couple of these to replace some sealed back mids in some old 80s style "monkey coffin" stereo towers.. These exceeded my expectations, I actually had to pad them down just a little to match the lower efficiency of the old woofers... I measured these mids using a very accurate reference microphone capsule along with TrueRTA software and the graph that was generated was almost perfectly identical to the curve that MCM makes available.. Ideally these are probably best used with at least a second order crossover in order to protect the driver and increase power handling, but since i was using these padded down in a low powered system i used a simple 1st order high pass (series poly cap) and they sound great... I also do believe that these could make fun & low-cost miniature midrange line arrays for PA use if you place 4 of them vertically as close together as possible and wire them in series-parallel, it would get you a respectable 99db @1w efficiency levels with 200w rms power handling, and great vertical pattern control.. Not bad at all for barely over 20 dollars!

    • by johns3620

      on 1/30/2012

      Midrange Driver

      Overall: 5 out of 5

      This makes a nice replacement, Just make sure you have room for the plate that surrounds the driver it is all one piece. Nice tone and good power handling.

    • by vacantmind

      on 12/16/2011

      excellent replacement

      Overall: 5 out of 5

      looked for a long time for replacements for my Fisher stv-722 &stv-420 speakers. these are a perfect fit and sound just like orginals if not better.

    • by brkohl

      on 2/20/2011

      High output midrange, sounds great!

      Overall: 4.5 out of 5

      This midrange does have excelent features. It does have 94 dB SPL as advertized. I used a 12 dB xover at 900 Hz to be clear of nonlinearities close to the 700 Hz resonance. I will buy more. Be careful of the paper cone as this is very delicate, protect it!

    Associated Products

    Image of Heavy Duty Speaker Binding Post Set

    50-4475 - Heavy Duty Speaker Binding Post Set

    Gold plated binding posts are ideal for demanding speaker enclosure applications where thick walls prohibit the use of conventional cup terminals. Extended thread length is perfect for enclosures of up to 1" thick. To install, simply drill a 1/4" hole&...

    In Stock


    Buy Now