MCM Electronics

250W RMS 4 Ohm Paper Cone Woofer 10 Inch Die CastMCM Part #: 55-3241  |  MCM Audio Select Part #: 55-3241

250W RMS 4 Ohm Paper Cone Woofer 10 Inch Die Cast 3.8 stars from 2 reviews.
Login to rate or review this product

10" Paper Cone Woofer
Low cost general replacement woofer is ideal in a two way cabinets or as a subwoofer. It is perfect for prosound applications and is suitable for ported or sealed enclosures.

Also available in 8ohm Version

Product Description

    General Specifications:
    • Nominal Diameter: 10 inch
    • Rated Lmpedance: 4Ohm
    • Operating Bandwidth: 35 ~ 3.5KHz (-3dB)
    • Power Handling Capacity: 200W RMS
    • Sensitivity (1W/M): 93dB (±3dB)
    • Voice Coil Diameter: 2 inch

    Thiele-Small Parameters:
    • Resonance Frequency Fs: 41.8Hz
    • DC Resistance Re: 3.4Ohm
    • Mechanical Q Factor Qms: 3.08
    • Electrical Q Factor Qes: 0.603
    • Total Q Factor Qts: 0.5042
    • Equivalent Cas air load Vas: 58.079 L
    • Surface Area of Cone Sd: 0.0363 m2
    • Efficiency Bandwidth Product EBP 69.3
    • Voice Coil Over Hang X-max 6.5 mm

    Physical Information:
    • Cutout: 9.21"
    • Mounting Depth: 5.12"
    • Basket: Die cast aluminum
    • Magnet Type: 40 oz.
    • Cone Material: Non pressed paper
    • Surround: Cloth
    • Dust Cap: Paper
    • Damper: Cloth

Product Reviews

  • "These are great Bass Cabinet Replacement Speakers" by xbud on 3/1/2014
    Overall: 5 out of 5

    I replaced the speakers in a set of name brand bass speaker cabinets and these are far and away better than the originals. The Deep bass that emanates from these woofers is fantastic. I tune to a drop A# on a Five String and these still sound loud and clear. I had to modify the cabinets and remove some of the porting that was these cabinets were tuned to, and also had to tweak the bass amp for the changes but they are still sounding great. Good bang for the buck compared to Eminence and B&C bass speakers. Keep in find these are woofers and not Full Range Bass Cabinet Speakers. I am sure a set of Kappa 10 LF's would sound better, but not for the money!

  • "speaker" by organman on 3/27/2013
    Overall: 2.5 out of 5

    does not hold up to bass freq.

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of 3M™ Black Strip-Caulk - Box of 60 - 1' Lengths

108-3190 - 3M™ Black Strip-Caulk - Box of 60 - 1' Lengths

Soft, non-hardening caulking material for use in all types of seams, joints and openings. This caulk can easily be thumbed into place and smoothed with finger. Non-sag consistency makes it ideal for vertical and overhead applications.

In Stock


Buy Now
Image of Blank Speaker Terminal Cup

50-1085 - Blank Speaker Terminal Cup

Intended for customizing speaker enclosures, this recessed panel is ideal for any cabinet or panel application.

In Stock


Buy Now
Image of Red/Black Binding Post Speaker Terminal Cup Round

50-1271 - Red/Black Binding Post Speaker Terminal Cup Round

Round Speaker Terminal Cup Perfect for the recessed mounting in the rear of most speaker systems.

In Stock


Buy Now
Image of Heavy Duty Speaker Binding Post Set

50-4475 - Heavy Duty Speaker Binding Post Set

Gold plated binding posts are ideal for demanding speaker enclosure applications where thick walls prohibit the use of conventional cup terminals. Extended thread length is perfect for enclosures of up to 1" thick. To install, simply drill a 1/4" hole&...

In Stock


Buy Now

Others Also Bought

Image of Rosin SD - .080 x 10'

20-2797 - Rosin SD - .080 x 10'

This safe, fast rosin flux desoldering braid is designed for general purpose solder removal from PC boards. ESD-safe static dissipative bobbin minimizes the risk of damage associated with static electricity. Non corrosive formula is designed for Type R rosin f...

In Stock


Buy Now
Image of 32 Piece Security Bit Set

22-1875 - 32 Piece Security Bit Set

Handy pocket size set contains many of the bits commonly used to remove tamper resistant screws found in many of today's electronic products. Items like IBM PS/2 monitors, cable boxes, telephone equipment and much more, commonly use these type of screws. Kit conta...

In Stock


Buy Now
Image of Desoldering Pump - ESD Version

21-8225 - Desoldering Pump - ESD Version

Provides safe, low cost means of desoldering connections, PC boards and components. Large capacity spring-loaded plunger quickly removes solder in a single action. Tools easily disassemble for fast cleaning, tip and "O" ring replacement. Intern...

In Stock


Buy Now
Package Specifications & Dimensions
Weight:7.1 lbs.
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:11.25 in.
Width:11.25 in.
Height:6.25 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages

MCM Cat 57, Page 159

PDF Reference

Requires Adobe Acrobat Reader.

Mfr. Info

MCM Audio Select Logo
Mfr. Name:MCM Audio Select
Mfr. Part Number:55-3241
Intorducing the new Raspberry Pi 2 - Now 6x faster
Same low price and size. More memory faster quad core procesor