MCM Electronics

Mid / High Frequency Cabinet with Midrange Horn and Piezo TweetersMCM Part #: 555-10350  |  MCM Custom Audio Part #: 555-10350

Mid / High Frequency Cabinet with Midrange Horn and Piezo Tweeters 4.2 stars from 8 reviews.
Login to rate or review this product

Mid / High Frequency Cabinet

Featuring four piezo horn tweeters and a piezo midrange horn, this cabinet delivers outstanding midr and high frequency response and is an ideal addition to any PA speaker system.

Product Description


  • Power capacity: 300W RMS, 600W peak
  • Frequency response: 1KHz~20KHz
  • SPL: 95dB (W/M)
  • Nominal impedance: 8ohm
  • 1/4" and binding post parallel inputs
  • Dimensions: 11" (H) x 17" (W) x 13.75" (D)

Product Reviews

  • "Absolute Garbage" by timex0 on 4/25/2014
    Overall: 2 out of 5

    I ordered 4 of these because they were on sale. They do give the illusion of a quality product, complete with reinforced corners, carpeting, etc. The problem is they don't work. There was at least one driver on all four of my units that didn't work right out of the box, and the packaging arrived in good condition, indicating the problems didn't arise during shipping.

    Some of the jacks didn't work right either. You want to use a 1/4" male to male to daisy chain them to something, but some of them didn't work and I had to use the flimsy screw-lock connectors just to get any sound out of them. Put your ear up to each of the five drivers, and chances are at least some of them will not be working.

    The drivers and jacks are easily removable, I think the best use for these is just to remove all of the drivers, install your own tweeter(s) and / or a small midrange in a new custom-built front. You will end up with a good-looking, working product reworking these units yourself.

    I gave it a 3 for value only because of the ability to do that, otherwise they are worthless as is, unless you are happy with one or two drivers out of 5 working.

  • "Simple horn cabinet, but very effective" by thomasrung on 7/5/2012
    Overall: 5 out of 5

    unbelievable quality and sound for the price ... i couldn't buy the midrange horn for what i paid for the whole unit. it really brought my keyboard speaker to life. wish i had bought more at the super low price i got them for.

  • "Glad I purchased" by gbergh on 4/21/2012
    Overall: 4.5 out of 5

    Except for the fact that I only got one of the units (the other is back-ordered), I used it on stage and it performed very well - lots more clarity, needed very little tweaking on the EQ. Fairly narrow dispersion angle - really need two, one on each PA stack. Lots of compliments about our sound, however. Not the best construction, but an excellent value for the money paid.

  • "Speaker Cabinet" by cybercord on 3/10/2012
    Overall: 2.5 out of 5

    Box came with compression driver bouncing internal of box. The threads do not match very well and will not create a snug fit. Not worth sending back or complaining. I used locktite to fix the threading issues as nothing was broken. Plays as I had hoped for and for the price, it sounds fine. Plastic box corners, but what can you expect for $35. Would I buy again , probably. Recommend, ?? take your chances vs price is ok. It meet my expectation vs price. Not comparing to JBL or other high end drivers. Needs a handle, it light and looks good.

  • "Midrange / Piezo set-up" by mojoaudioguru on 2/1/2012
    Overall: 4.5 out of 5

    Although, I'm not a fan of piezo horns and or midranges, these cabinets seem to do what I need them to do. I use a pair of them as center fill for very wide stage set-ups. I always put my dual 15" subwoofer in the front center of the stage, firing out to the audience. These Mid / Hi cabinets then sit on top of the sub, firing out towards the audience, as well. Although they don't sound anything like my JBL SR4738s, (Located on either side of the stage), these do the trick for center fill, without any issues. They can handle the power, too. The sub puts out 1,000 watts total, while these are putting out 250 watts per cabinet. The construction quality is excellent. The value was unbelievable. I'll be ordering another pair of these, as back-up horns. The JBLs have a tendency to blow thier diaphragms on occassion. In a pinch, these would do just fine. (I'd just pop them on top of the JBL 18" 3-ways, and I'm good to go) I recommend them as either center fill or back-up horns.

  • "Mid / High Cabinets" by Davisound on 11/30/2011
    Overall: 5 out of 5
    Top 10 Contributor

    Just received our second set of these cabinets. You cannot believe how good these sound without actually hearing them for yourself! Very well built, light weight and easy to connect. We stack them on our 12" cabinets which sit on 18" subs. A noticable improvement in the upper midrange of our system with cleaner vocals and more presence on the drum kit! The solid corner protectors really help extend the life of these cabinets when on the road.

  • "Far, Far better than expected" by jpaulbolcar on 11/28/2011
    Overall: 5 out of 5

    I've owned a a pair of these for maybe 18 months now. They replaced two Altec 811B horns which were quite loud but had nowhere near the sweetness of these boxes. At 1 watt rms they provide just enough middle and top end to be enjoyable for normal small room listening. Pushing them with a 275 watt rms (per channel) amp to 100 or 120 watts and these things really come to life! Cross them over around 1000 Hz and couple them with a couple of quality wide range 15" speaker bins and you have a crisp and clear high quality DJ rig. I also use them as part of a wide range keyboard rig. At their minimal cost, I can't praise these speakers enough! I just bought a backup pair that were on sale at a ridiculously low MCM price! You will not be disappointed.

  • "Tweeters" by phantomv on 10/6/2011
    Overall: 5 out of 5

    They are well worth the money, look and sound great.

  • Rate It!

    Login Here to rate and review this product.

Others Also Bought

Image of PA / DJ Speaker Six Tweeter Array

555-10345 - PA / DJ Speaker Six Tweeter Array

Outstanding high frequency response, wide dispersion and very high immunity to burnout make this an ideal addition to any existing PA speaker system. Six-sided enclosure places six piezoelectric tweeters at five different angles for ultra wide dispersion. Because ...

In Stock


Buy Now
Image of 15

55-2953 - 15" Woofer with Paper Cone and Cloth Surround - 200W RMS at 8ohm

15" Paper Cone Woofer Low cost general replacement woofer is ideal in a two way cabinets or as a subwoofer. It is perfect for prosound applications and is ideal in ported or sealed enclosures.,/p> Also available in 4Ohm Version

In Stock


Buy Now
Image of EURORACK PRO 12 Input Mixer with Mic Preamps and FX Processor

555-10715 - EURORACK PRO 12 Input Mixer with Mic Preamps and FX Processor

12-Input Mic/Line Rack Mixer Looking for a versatile line/mic mixer that fits in a rack AND eliminates the need for tons of outboard gear? The 12-channel RX1202FX is not only rack mountable, but comes loaded with a 24-bit multi-FX processor and 8 built-in studio...

In Stock


Buy Now
Package Specifications & Dimensions
Weight:17 lbs.
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:18.75 in.
Width:15 in.
Height:12.25 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages

MCM Cat 57, Page 028

MCM Cat 56, Page 190

Mfr. Info

MCM Custom Audio Logo
Mfr. Name:MCM Custom Audio
Mfr. Part Number:555-10350