MCM Electronics

Multi-Colored LED PAR 38 Can with 108 LEDs - Black HousingMCM Part #: 555-11410  |  Stellar Labs Part #: 555-11410

Multi-Colored LED PAR 38 Can with 108 LEDs - Black Housing 3.1 stars from 4 reviews.
Login to rate or review this product

LED Par 38 Can

An ideal accent light for any performance environment, this LED par 38 lamp provides reliability and low power consumption, as well as extremely bright lighting effects. Various patterns can be controlled by the beat of the music playing (adjustable sensitivity) or by manual speed adjustment. In a multi fixture setup, one unit can be used as the DMX controller, ensuring that each light is in sync. Lights can also be controlled with an external DMX controller.

  • Color: Black

Product Description

Features

  • Auto fade mode
  • Auto color change mode
  • Manual color change mode
  • Settings are adjustable via dip-switches on back of light
  • Lights can be daisy-chained via XLR DMX cables
  • Manual pattern speed adjustment
  • 36 each of red, blue and green LEDs
  • Only 14.5W power consumption
  • Approximately 50,000 hour bulb life

Note: For best synched results, proper DMX cables are highly recommended, and a DMX terminator is required at the end of a chain.


Product Reviews

  • "Losing LED's" by jeffcrouch on 4/15/2013
    Overall: 1.5 out of 5
    Value:
    Quality:

    I have 8 of these, I have owned them for 3 years. There are currently 5 of them with half of the RED LED's no longer illuminating, this started happening after about one year. I have one that flickers on and off and sometimes quits working altogether. I am pretty sure the reason these are failing is due to bad traces internally on the LED circuit board as I can touch the backside of the board while having just the red on solid and if I touch certain leads I get the dead RED LED's to faintly illuminate. I wish there was a schematic available so that I could just make a few wire bridges to fix these! OR, if there was a replacement LED board available that would be nice as well... My only other complaint is that they didn't use a high enough value for the MUSIC pot so it is VERY VERY sensitive, touch it and they don't respond to music, bump it again and they over respond! Not a big deal since I use a DMX controller now.

  • "PAR 38 Red Leds burning out" by timtaylor on 12/7/2012
    Overall: 1 out of 5
    Value:
    Quality:

    I have bought 16 of these lights and on all of them some of the red LEDs have stopped working. Green and Blue are fine but the Reds have stopped working

  • "Good deal" by SUNSETISLAND on 6/2/2012
    Overall: 5 out of 5
    Value:
    Quality:
    Top 25 Contributor

    Bought 4 of these on sale for $35, at that price, they are a serious value! The 5-ch DMX implementation is kinda rare, and my DMX software did not have a profile for them ... but after a few hours of trying other profiles, I did eventually find one from another manufacturer that worked. NOTE TO MCM/STELLAR LABS: send profile info to ADJ, and everyone else who makes DMX software and/or controllers! Light output is about equal to a Gelled-down conventional PAR 38 ... and the "built-in" auto & music programs work very well.

  • "Best investment i made in a while" by laxworior on 12/20/2011
    Overall: 5 out of 5
    Value:
    Quality:

    I bought 2 of these for my dj setup and they are bright and perfect for any venue. You can use one as a cobtroller so the lights are the same color and they have microphones in them so they can change color as the music is playing... All in all i recomend it, planning on buying 2 more.

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of Portable Light Stand - 50lb. Capacity

555-11680 - Portable Light Stand - 50lb. Capacity

This adjustable height PAR can stand is perfect for any mobile DJ who utilizes lighting effects, and is suitable for up to four PAR 36, 38 or PAR 56 lamps. Collapsible design and all steel construction provide the ultimate combination of durability and portabilit...

In Stock

$25.49

Buy Now
Image of Three Pin DMX Cable - 3'

555-11900 - Three Pin DMX Cable - 3'

3' DMX Cable Highly flexible cable features single pair with shield construction and 110Ω nominal impedance. It is specifically designed for use with DMX controlled professional lighting and effects fixtures. It is terminated with rugged metal 3-pin XLR mal...

In Stock

$4.39

Buy Now
Image of Three Pin DMX Cable - 6'

555-11901 - Three Pin DMX Cable - 6'

6' DMX Cable Highly flexible cable features single pair with shield construction and 110Ω nominal impedance. It is specifically designed for use with DMX controlled professional lighting and effects fixtures. It is terminated with rugged metal 3-pin XLR mal...

In Stock

$4.69

Buy Now
Image of Three Pin DMX Cable - 10'

555-11902 - Three Pin DMX Cable - 10'

10' DMX Cable Highly flexible cable features single pair with shield construction and 110Ω nominal impedance. It is specifically designed for use with DMX controlled professional lighting and effects fixtures. It is terminated with rugged metal 3-pin XLR ma...

In Stock

$5.29

Buy Now
Image of Three Pin DMX Cable - 15'

555-11903 - Three Pin DMX Cable - 15'

15' DMX Cable Highly flexible cable features single pair with shield construction and 110Ω nominal impedance. It is specifically designed for use with DMX controlled professional lighting and effects fixtures. It is terminated with rugged metal 3-pin XLR ma...

In Stock

$5.69

Buy Now
Image of Three Pin DMX Cable - 30'

555-11904 - Three Pin DMX Cable - 30'

30' DMX Cable Highly flexible cable features single pair with shield construction and 110Ω nominal impedance. It is specifically designed for use with DMX controlled professional lighting and effects fixtures. It is terminated with rugged metal 3-pin XLR ma...

In Stock

$7.99

Buy Now
Image of Three Pin DMX Cable - 50'

555-11905 - Three Pin DMX Cable - 50'

50' DMX Cable Highly flexible cable features single pair with shield construction and 110Ω nominal impedance. It is specifically designed for use with DMX controlled professional lighting and effects fixtures. It is terminated with rugged metal 3-pin XLR ma...

In Stock

$10.49

Buy Now
Image of Three Pin DMX Cable - 75'

555-11906 - Three Pin DMX Cable - 75'

75' DMX Cable Highly flexible cable features single pair with shield construction and 110Ω nominal impedance. It is specifically designed for use with DMX controlled professional lighting and effects fixtures. It is terminated with rugged metal 3-pin XLR ma...

On Backorder(Expected in 14 days)

$14.19

Buy Now
Image of DMX Adapter Cable - 3 Pin Male to 5 Pin Female - 14'' Length

555-11910 - DMX Adapter Cable - 3 Pin Male to 5 Pin Female - 14'' Length

DMX Cable Adapter 3-pin male to 5-pin female DMX adapter cable allows 5-pin cables and lighting devices to be used with DMX controllers having 3-pin output. Overall cable length is 14".

In Stock

$6.19

Buy Now
Image of DMX Adapter Cable - 5 Pin Male to 3 Pin Female - 14'' Length

555-11911 - DMX Adapter Cable - 5 Pin Male to 3 Pin Female - 14'' Length

DMX Cable Adapter 5-pin male to 3-pin female DMX adapter cable allows commonly available 3-pin cables and lighting devices to be used with DMX controllers having 5-pin output. Overall cable length is 14".

In Stock

$6.19

Buy Now
Image of DMX Terminator Male 3-pin

555-11915 - DMX Terminator Male 3-pin

Required in any professional lighting application where DMX controls are used, XLR DMX terminators are plugged into the last light in a series.

In Stock

$1.79

Buy Now
Image of 192 Channel DMX Controller

555-12605 - 192 Channel DMX Controller

"DMX Operator" 192 Channel DMX Controller An affordable solution for controlling DMX products, the DMX Operator will control up to 192 DMX channels. This unit may be connected directly to intelligent lighting, American DJ and Stellar Labs LED PAR lamps, or conven...

In Stock

$199.99

Buy Now

Others Also Bought

Image of Double Sided Foam Tape

28-955 - Double Sided Foam Tape

•Thousands of uses •Fasten accessories to car dash, etc. •3/4" x 61/2' roll

In Stock

$4.19

Buy Now
Package Specifications & Dimensions
Weight:2.65 lbs.
Hazardous:No
Warranty:365 days
Need to Return?
Length:11.5 in.
Width:7 in.
Height:7 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 102

MCM Cat 56, Page 257

PDF Reference
DatasheetManual

Requires Adobe Acrobat Reader.

Mfr. Info

Stellar Labs Logo
Mfr. Name:Stellar Labs
Mfr. Part Number:555-11410