MCM Electronics

Three Pin DMX Cable - 100'MCM Part #: 555-11907  |  Stellar Labs Part #: 555-11907

Three Pin DMX Cable - 100' 4.5 stars from 1 review.
Login to rate or review this product

100' DMX Cable
Highly flexible cable features single pair with shield construction and 110Ω nominal impedance. It is specifically designed for use with DMX controlled professional lighting and effects fixtures. It is terminated with rugged metal 3-pin XLR male to female connectors. Thin 4mm diameter cable provides unobtrusive appearance and greater installation flexibility.

Product Description

Available Lengths:

Item #Length
555-119003'
555-119016'
555-1190210'
555-1190315'
555-1190430'
555-1190550'
555-1190675'
555-11907100'

Product Reviews

  • "THIN IS IN" by tonypcman on 9/18/2014
    Overall: 4.5 out of 5
    Value:
    Quality:

    I like the fact that the cable is very thin as opposed to a regular mic cable. This makes transporting much lighter. If you use for mobile purposes, perhaps you should use a protective bag for them. This is my first time using actual DMX Cables for I have always used Mic cables.

  • "Works, Very think outer jacket" by on 7/5/2014
    Overall: 3.5 out of 5
    Value:
    Quality:
    Top 10 Contributor

    Very thin wire, Not good for mobile use. Fine for permanent install.

  • "Works, outer jacket could be thicker" by on 7/5/2014
    Overall: 3.5 out of 5
    Value:
    Quality:
    Top 10 Contributor

    Very thin wire, Not good for mobile use. Fine for permanent install.

  • "Worked fine but would like a thicker outer jacket" by on 7/5/2014
    Overall: 3.5 out of 5
    Value:
    Quality:
    Top 10 Contributor

    The wire is very thin so it needs to be protected. Not good for mobile use, but fine for permanent install in my opinion.

  • "Perfect cable" by kitchri on 4/22/2014
    Overall: 5 out of 5
    Value:
    Quality:

    Excellent cable for connecting lights on truss or t-Bars. No issues

  • "Work great" by jltray on 4/2/2014
    Overall: 5 out of 5
    Value:
    Quality:

    I use these on my lights at gigs, not issues.

  • "Great Service and Value" by michaelsmusicstudio on 8/21/2012
    Overall: 4.5 out of 5
    Value:
    Quality:

    This product has held up great and you can't beat the price

  • "30' DMX cable" by mojoaudioguru on 3/5/2012
    Overall: 5 out of 5
    Value:
    Quality:

    These cables are excellent for their purpose. I recently purchased 12 LED par cans from MCM and assembled them on a pair of trees. (Six par cans per) I then tethered each one to each other using 3' versions of the MCM DMX cables. The 30 footers are then used to span the width of the stage, (The trees average about 11 feet high, and the stage about 16-20 feet wide), and connect the two trees together with a pair of 30 foot DMX cables. I could use a 50 footer, but I like to be able to access a link, should problems arise during a show. Another 50 footer, (Or more, depending on the event), then runs to the DMX controller. (Also provided by MCM) The quality is perfect and the price is unbeatable.

  • "Danimal - Owner of VIP Entertainment" by dancar on 1/10/2012
    Overall: 3.5 out of 5
    Value:
    Quality:

    Cable came in just as I expected them. Athin gauge wire but they are useful for short distances.

  • "Should be just fine for any (semi-)permanent installation" by delinth on 7/14/2011
    Overall: 4 out of 5
    Value:
    Quality:
    Top 10 Contributor

    These don't use Neutrik connectors, but each soldered connection is individually insulated with heat-shrink tubing; likewise, the end of the cable jacket. While I don't think I'd trust these to road duty, I can definitely say they are acceptable to me for my installation needs (house of worship). It would cost me just as much to build the same length of cable myself using bulk-purchase Beldin DMX cable and Neutrik connectors - been there & done that! These saved me a lot of time.

  • "Should be just fine for any (semi-)permanent installation" by delinth on 7/14/2011
    Overall: 4 out of 5
    Value:
    Quality:
    Top 10 Contributor

    These don't use Neutrik connectors, but each soldered connection is individually insulated with heat-shrink tubing; likewise, the end of the cable jacket. While I don't think I'd trust these to road duty, I can definitely say they are acceptable to me for my installation needs (house of worship). It would cost me just as much to build the same length of cable myself using bulk-purchase Beldin DMX cable and Neutrik connectors - been there & done that! This saved me a lot of time.

  • "Should be just fine for any (semi-)permanent installation" by delinth on 7/14/2011
    Overall: 4 out of 5
    Value:
    Quality:
    Top 10 Contributor

    Well, these don't use Neutrik connectors, but each soldered connection is individually insulated with heat-shrink tubing; likewise, the end of the cable jacket. While I don't think I'd trust these to road duty, I can definitely say they are acceptable to me for my installation needs (house of worship). It would cost me just as much to build the same length of cable myself using bulk-purchase Beldin DMX cable and Neutrik connectors - been there & done that! These saved me a lot of time.

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of Multi-Colored LED PAR 56 Can with 151 LEDs - Black Housing

555-11400 - Multi-Colored LED PAR 56 Can with 151 LEDs - Black Housing

Turn it up a notch with these long lasting DMX controllable LED par 56 equivalent lighting fixtures. Various patterns can be controlled by the beat of the music playing (adjustable sensitivity) or by manual speed adjustment. In a multi fixture setup, one unit can ...

In Stock

$59.99

Buy Now
Image of Portable Light Stand - 50lb. Capacity

555-11680 - Portable Light Stand - 50lb. Capacity

This adjustable height PAR can stand is perfect for any mobile DJ who utilizes lighting effects, and is suitable for up to four PAR 36, 38 or PAR 56 lamps. Collapsible design and all steel construction provide the ultimate combination of durability and portabilit...

In Stock

$25.49

Buy Now
Image of DMX Terminator Male 3-pin

555-11915 - DMX Terminator Male 3-pin

Required in any professional lighting application where DMX controls are used, XLR DMX terminators are plugged into the last light in a series.

In Stock

$1.79

Buy Now
Image of Three Channel DMX Controller

555-12615 - Three Channel DMX Controller

Basic RGB DMX Light Controller This basic three channel controller is designed to control any standard three channel RGB fixture. It is the perfect entry level DMX controller for use with American DJ and Stellar Labs LED par lamps, as well as other devices. The c...

In Stock

$49.99

Buy Now

Others Also Bought

Image of Three Pin DMX Cable - 50'

555-11905 - Three Pin DMX Cable - 50'

50' DMX Cable Highly flexible cable features single pair with shield construction and 110Ω nominal impedance. It is specifically designed for use with DMX controlled professional lighting and effects fixtures. It is terminated with rugged metal 3-pin XLR ma...

In Stock

$10.49

Buy Now
Image of 3-Pin DMX Terminators - 2 Pk.

555-11916 - 3-Pin DMX Terminators - 2 Pk.

2-Pack DMX Terminators (3-pin) Required in any professional lighting application where DMX controls are used, XLR DMX terminators are plugged into the last light in a series. Five Pin Terminator also available.

In Stock

$2.79

Buy Now
Image of Outdoor Omnidirectional FM Antenna

30-2435 - Outdoor Omnidirectional FM Antenna

Outdoor Omnidirectional FM Antenna Rugged outdoor antenna is designed to provide outstanding reception for all broadcast FM stations including HD radio. Fully assembled, this antenna is ready for immediate installation on an existing mast pipe or in the attic. ...

In Stock

$9.99

Buy Now
Package Specifications & Dimensions
Weight:0.5 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:12 in.
Width:10.5 in.
Height:2 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 117

MCM Cat 56, Page 262

Mfr. Info

Stellar Labs Logo
Mfr. Name:Stellar Labs
Mfr. Part Number:555-11907