MCM Electronics

Three Channel DMX ControllerMCM Part #: 555-12615  |  American DJ Part #: RGB3C

Three Channel DMX Controller 4.3 stars from 3 reviews.
Login to rate or review this product

Basic RGB DMX Light Controller

This basic three channel controller is designed to control any standard three channel RGB fixture. It is the perfect entry level DMX controller for use with American DJ and Stellar Labs LED par lamps, as well as other devices. The control panel features independent slide controls for RED, GREEN and BLUE, plus nine programmed color preset buttons. It’s the ideal control solution for DJ’s, small night clubs and bars that want a simple LED controller to run the show.

Product Description

Features:

  • Program Select: allows seven static colors and 10 chase programs to be accessed via the program select fader
  • Sound Active: Activates 10 chase programs to randomly sequence via an internal microphone
  • Auto Run: Activates 10 chase programs to randomly sequence while the speed of the chases can be controlled via the Speed fader
  • Hold: Pauses the current scene and will remain locked in even when power to the controller is switched off and on
  • Blackout: Brings all values to zero so there is no output going to your fixtures

Specifications:

  • DMX output connector: 3-pin XLR
  • Power requirements: 9~12VDC, 3.6W, AC adaptor included
  • Dimensions: 8.7" (H) x 5.5" (W) x 2.5" (D)

Product Reviews

  • "Almost the right fit, again." by dgigoux on 9/25/2013
    Overall: 3 out of 5
    Value:
    Quality:

    I tried this contoller after trying the Obey 3 hoping that it would be better. I wound up returning this one as well to try the American DJ RGBW4C. I liked this one as well except it didn't have a master dimmer. I also thought it was kind of weird that it didn't have on on/off switch. I am using Stellar Labs LED Par 64 cans and it too controlled them well. The sound activated chase sequences are better on this unit, but it still can wind up with no lights when the song ends. It didn't happen as often as the Obey 3 did, but it still would happen. It is also a very small controller.

  • ""Make it Happen" product" by smoothomark on 5/29/2012
    Overall: 5 out of 5
    Value:
    Quality:

    Perfect unit for last minute setups that don't leave you with programming time. Lots of different looks are pre-programmed so all you have to do is plug and play. If you don't mind all of your fixtures doing the same thing, then this unit will get lots of use. I plan on always having this at every show, even if it doesn't get used it is a great backup unit. Buy one and be glad you did.

  • "DMX Controller" by hsenecal on 3/15/2012
    Overall: 5 out of 5
    Value:
    Quality:

    great starter controller

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of Three Pin DMX Cable - 3'

555-11900 - Three Pin DMX Cable - 3'

DMX cables utilize a twisted pair of 110ohm conductors, ensuring a much more reliable data transfer than standard XLR cables, and are specifically designed for any professional lighting control setup. Length: 3'

In Stock

$5.99

Buy Now
Image of Three Pin DMX Cable - 6'

555-11901 - Three Pin DMX Cable - 6'

DMX cables utilize a twisted pair of 110ohm conductors, ensuring a much more reliable data transfer than standard XLR cables, and are specifically designed for any professional lighting control setup. Length: 6'

In Stock

$6.99

Buy Now
Image of Three Pin DMX Cable - 15'

555-11903 - Three Pin DMX Cable - 15'

DMX cables utilize a twisted pair of 110ohm conductors, ensuring a much more reliable data transfer than standard XLR cables, and are specifically designed for any professional lighting control setup. Length: 15'

In Stock

$8.49

Buy Now
Image of DMX Terminator Male 3-pin

555-11915 - DMX Terminator Male 3-pin

Required in any professional lighting application where DMX controls are used, XLR DMX terminators are plugged into the last light in a series.

Limited Stock

$2.49

Buy Now

Others Also Bought

Image of Three Pin DMX Cable - 30'

555-11904 - Three Pin DMX Cable - 30'

DMX cables utilize a twisted pair of 110ohm conductors, ensuring a much more reliable data transfer than standard XLR cables, and are specifically designed for any professional lighting control setup. Length: 30'

In Stock

$11.99

Buy Now
Image of DMX Terminator Male 3-pin

555-11915 - DMX Terminator Male 3-pin

Required in any professional lighting application where DMX controls are used, XLR DMX terminators are plugged into the last light in a series.

Limited Stock

$2.49

Buy Now
Image of Three Pin DMX Cable - 3'

555-11900 - Three Pin DMX Cable - 3'

DMX cables utilize a twisted pair of 110ohm conductors, ensuring a much more reliable data transfer than standard XLR cables, and are specifically designed for any professional lighting control setup. Length: 3'

In Stock

$5.99

Buy Now
Package Specifications & Dimensions
Weight:3.128 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:12.5 in.
Width:8.25 in.
Height:5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 115

MCM Cat 56, Page 261

PDF Reference

Requires Adobe Acrobat Reader.

Mfr. Info

American DJ Logo
Mfr. Name:American DJ
Mfr. Part Number:RGB3C