MCM Electronics

RDL Microphone Preamplifier By Radio Design Labs (STM-2) MCM Part #555-STM-2

0 stars No reviews yet
$137.99 
& FREE Shipping

Microphone Preamplifier

The STM-2 is a low-noise microphone preamp designed for use in commercial sound, broadcast, and recording. The STM-2 is very flexible, with gain adjustment from 35 to 65 dB, two balanced or unbalanced outputs, and available phantom supply input. Its ultra-low distortion and low-noise performance make it the best choice, even when larger preamps could be used.

Specifications Top

The STM-2 supply input is single ended and operates from 24 VDC. Operation from 12 VDC is possible with a 6 dB reduction in headroom. Each output drives high or low impedance loads.

    Features
  • Low-Noise Mic Preamp
  • Adjustable Output Level
  • High or Low Impedance Mic Inputs
  • Mic Input to 2 Line Outputs
  • Two Balanced or Unbalanced Outputs
  • Phantom Capability
  • RF-Filtered Inputs

Specifications
Input: 500 ohm balanced; 5 Kohm unbalanced
Phantom: 24 VDC; IEC 61938: 2013, Filtered
Outputs (2): +4 dBu 150 ohm balanced; -10 dBv unbalanced
Frequency Response: 50 Hz to 30 kHz (± 1.5 dB)
Gain: Adjustable 35 to 65 dB
THD+N: < 0.05% (50 dB Gain)
CMRR: >50 dB (50 Hz to 20 kHz)
Residual Noise: < -70 dB (below +4 dBu 150 ohm source @ 50 dB gain)
Headroom: > 20 dB (24 VDC supply);
> 14 dB (12 VDC supply)
Phantom Power Input: 24 to 33 VDC @ 10 mA maximum
Power Requirement: GROUND-REFERENCED, 24 to 33 VDC @ 25 mA
Ambient Operating Environment: 0° C to 55° C
Dimensions: Height: 0.7 in. (1.7 cm), Width: 3 in. (7.6 cm), Depth: 1.6 in. (3.9 cm)
Package Dimensions: 2" x 2" x 4"
Shipping Weight: 0.195 lbs.


Part Numbers
MCM Part #:555-STM-2
Radio Design Labs Part #:STM-2
Package Specifications & Dimensions
Weight:0.1875 lbs.
Hazardous:No
Warranty:1095 days
Need to Return?
Length:4.25 in.
Width:2.25 in.
Height:2 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No

Product Reviews Top

Product Downloads Top

PDF Reference

Requires Adobe Acrobat Reader

Associated Products

Image of RDL Power Supply - 500mA

555-PS-24A - RDL Power Supply - 500mA

Designed specifically for use with all RDL modules. All models are single ended, 24VDC output. Output current: 500mA

In Stock

$22.99

Buy Now
Image of RDL Power Supply - 1A

555-PS-24K - RDL Power Supply - 1A

Designed specifically for use with all RDL modules. All models are single ended, 24VDC output. Output current: 1A

In Stock

$28.99

Buy Now

Others Also Bought

Image of 3M™ Scotchfil™ Electrical Insulation Putty

108-4405 - 3M™ Scotchfil™ Electrical Insulation Putty

This Electrical insulation putty is used to insulate connections up to 600 volts, build up cable splices, round out high voltage connections, create a moisture seal at ground wire exits and much more. Can be wrapped, stretched or molded around irregular shapes fo...

In Stock

$12.99

Buy Now
Image of 130C Linerless Rubber Splicing Tape 3/4'' x 30'

108-980 - 130C Linerless Rubber Splicing Tape 3/4'' x 30'

Self fusing tape offers maximum protection to cable splices and connections. Specially formulated rubber material fuses to itself as it is wrapped around material. New design allows tape to be supplied on roll without plastic liner, making installation easy. P...

In Stock

$14.99

Buy Now
Image of 130C Linerless Rubber Splicing Tape 1'' x 30'

108-981 - 130C Linerless Rubber Splicing Tape 1'' x 30'

Self fusing tape offers maximum protection to cable splices and connections. Specially formulated rubber material fuses to itself as it is wrapped around material. New design allows tape to be supplied on roll without plastic liner, making installation easy. P...

In Stock

$19.89

Buy Now