MCM Electronics

Rework StationMCM Part #: 72-6345  |  Tenma Part #: 72-6345

Rework Station 4.9 stars from 4 reviews.
Login to rate or review this product

Solder/Desolder Rework Station
Complete single-piece unit combines the benefits of a temperature controlled vacuum desoldering station, with a high quality temperature controlled soldering iron.

Kit Includes:

  • 1.0mm nozzle plus one spare
  • Cleaning pins
  • Replacement filters and filter tube

  • Product Description

  • Closed loop temperature control
  • Digital display
  • Handles stay cool during prolonged use
  • Rugged metal enclosure
  • A variety of replacement tips available

    Vacuum Desoldering Iron:

  • Efficient internal pump provides vacuum action
  • Lightweight ergonomic gun handle
  • Trigger pump activator
  • Heat resistant detachable cord and vacuum tube
  • 24VAC, 48W heating element
  • Temperature range: 410°F ~ 900°F

    Temperature Controlled Soldering Iron:

  • 24VAC, 48W heating element
  • Temperature range: 320°F ~ 900°F
  • Heat resistant detachable cord
  • Includes iron clad 3/64" conical tip
  • Variety of replacement tips are available
  • Overall dimensions: 5 1/2" (H) x 8 1/4" (W) x 7 1/2" (D) 1/2"
  • Power requirements: 120VAC, 60Hz, 100W
  • Click here for our new nozzle cleaning pins
    Replacement Tips:
    MCM Part # Description
    21-148 Conical tip
    21-925 Long conical tip
    21-926 Screwdriver tip
    21-927 Long screwdriver tip

    Replacement Nozzles:
    MCM Part # Description
    72-6863 0.8mm nozzle
    72-6864 1.0mm nozzle
    72-6865 1.2mm nozzle
    72-6866 1.5mm nozzle
    72-6867 2.0mm nozzle

  • Product Reviews

    • "Will make my job a lot easier." by onlysome1 on 12/3/2013
      Overall: 5 out of 5
      Value:
      Quality:

      I finally made the step and purchased one of these for myself. I had used my brothers identical unit a couple times and it worked so much slicker than my simple separate solder and desolder units. Heats up much quicker and is capable of much more things than the old stuff I was using.

    • "What a great Rework Station!" by ALWAYSPDG on 7/23/2013
      Overall: 5 out of 5
      Value:
      Quality:

      I had to solder over 50 jumper cables (project given to me by the boss) and man, this soldering job was real easy using this Rework Station! The soldering iron heated VERY quickly and maintained its tip temperature as set on the digital readout. It is very easy to use and very easy to set the tip temperature. You can watch the tip temp climb as it reaches its set temperature. It also maintained tip temperature VERY well. I couldn't ask for a better soldering station. I have not used the desoldering feature, so no comment on that yet. MCM answered all my questions regarding solder stations and after listening to the sales tech, I ordered this Rework Station and glad I did!

    • "Best one I have ever used!" by dougtaylorcontrols on 3/1/2013
      Overall: 5 out of 5
      Value:
      Quality:

      I own and personally used one of these Tenma rework stations since my purchase in 2006. It is my ONLY rework station. I love it, it works great and has never failed me when working with sensitive MOSFET devices and SM parts. Although it is a bench unit, I often take it to job sites where I know I will be working on sensitive electronics and/or an lot of repairs like stage lighting and sound systems. I keep a host of replacement parts for this unit because they are available! MCM is #1 for offering this great repair & service piece of gear.

    • "Great value for price" by nukwar on 10/28/2008
      Overall: 4.5 out of 5
      Value:
      Quality:

      This rework station comes with tips and nozzles. I have owned it for 2 weeks and it is working well. All though this is not a PACE product, it works extremely well compared to a $3K PACE station I was trained on. If purchased make sure you tin the tips and nozzles for about 30min to 45mins before using. This will tin them for good heat conduction and soldering. Place a little bit of mineral oil in the glass tube of the desoldering iron and spread it around the inside so the solder does not stick to it. When desoldering make sure you either have the desoldering iron horizontal or passed horizontal (nozzle facing up above horizontal) so that the solder flows easily into the glass tube. Never face the desoldering iron down vertical (270 degrees) and try to suck up the solder for this will clog the iron.

    • Rate It!

      Login Here to rate and review this product.

    Associated Products

    Image of Solder Aid Kit

    21-665 - Solder Aid Kit

    •Six piece kit includes heat sink, self-closing tweezers, small Phillips screwdriver, brush/scraper, pointed/slotted probe and curved point/scraper

    In Stock

    $5.49

    Buy Now
    Image of Solder Fume Extractor

    21-7960 - Solder Fume Extractor

    Solder Fume Extractor Electronic solders typically contain rosin–resin compounds and lead, which when heated may create noxious fumes. Prolonged exposure to these fumes is considered potentially harmful and may create health problems including headaches, nausea ...

    In Stock

    $40.49

    Buy Now
    Image of Replacement Desoldering Gun for 72-6340

    72-6406 - Replacement Desoldering Gun for 72-6340

    Replacement for Tenma #72-6340 and #72-6345 rework stations. 45" heat resistant cord is terminated with compatible five-pin connector. Includes 24V, 48W heating element, filters, 45" vacuum tube and 2.0mm nozzle.

    In Stock

    $47.99

    Buy Now
    Image of Replacement Heating Element

    72-6407 - Replacement Heating Element

    Replacement desoldering element for Tenma #72-6340 and #72-6345 rework stations. Four-wire design includes connections for 24V, 48W element and integral temperature sensor. Ideal for replacing damaged elements, or upgrading older stations to accept the new, shorte...

    In Stock

    $17.78

    Buy Now
    Image of Replacement Glass Tube

    72-6408 - Replacement Glass Tube

    Replacement parts for the Tenma #72-6340 and 72-6345 rework stations Glass tube measures 115/16" (L) x 13/16" (O.D.)

    In Stock

    $2.54

    Buy Now
    Image of Filter Set

    72-6409 - Filter Set

    Replacement parts for the Tenma #72-6340 and 72-6345 rework stations Filter set consists of one steel wool filter and one cotton disk filter

    In Stock

    $0.99

    Buy Now
    Image of O Ring Set

    72-6411 - O Ring Set

    Replacement parts for the Tenma #72-6340 and 72-6345 rework stations Contains two rubber "O" rings, each 13/16" (O.D.)

    In Stock

    $0.99

    Buy Now
    Image of 0.8mm Replacement Nozzle

    72-6863 - 0.8mm Replacement Nozzle

    Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing ol...

    In Stock

    $4.59

    Buy Now
    Image of 1.0mm Replacement Nozzle

    72-6864 - 1.0mm Replacement Nozzle

    Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing ol...

    In Stock

    $4.99

    Buy Now
    Image of 1.2mm Replacement Nozzle

    72-6865 - 1.2mm Replacement Nozzle

    Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing ol...

    In Stock

    $4.89

    Buy Now
    Image of 1.5mm Replacement Nozzle

    72-6866 - 1.5mm Replacement Nozzle

    Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing ol...

    In Stock

    $4.59

    Buy Now
    Image of 2.0mm Replacement Nozzle

    72-6867 - 2.0mm Replacement Nozzle

    Replacement parts designed specifically for use with the Tenma #72-6340 and #72-6345 rework stations. Sizes are available with tip diameters from 0.8mm~2.0mm. Overall length of all nozzles is 7/16". Note: Desoldering stations with heating elements utilizing ol...

    In Stock

    $4.48

    Buy Now
    Image of Rounded Head Tip Cleaner

    94-782 - Rounded Head Tip Cleaner

    The HAKKO 599B cleans your soldering iron tips without water! The 599B is made from coils of brass, which is softer than the tip plating yet harder than the oxidation that forms on the tip. To clean the tip, simply plunge (stab) the iron tip into the coils. The 59...

    In Stock

    $10.89

    Buy Now

    Others Also Bought

    Image of Equipment Wall Bracket - Adjustable Length

    50-14780 - Equipment Wall Bracket - Adjustable Length

    White Equipment Wall Bracket Designed for supporting microwave ovens from the wall, this bracket is ideal for any type of equipment.

    In Stock

    $13.29

    Buy Now
    Image of Bracket Pole Mount VESA75/100

    50-14534 - Bracket Pole Mount VESA75/100

    Pole Mount Bracket for LCD Monitors Rugged bracket fits any 30mm ~ 60mm diameter pole, whether positioned horizontally or vertically. Great for use with PA speaker and light stands, lighting and stage trusses, and support masts. Pivoting mechanism allows monito...

    In Stock

    $20.39

    Buy Now
    Package Specifications & Dimensions
    Weight:14.98 lbs.
    Hazardous:No
    Warranty:365 days
    Need to Return?
    Length:11.5 in.
    Width:11 in.
    Height:7.75 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages
    Catalog/Page:

    MCM Cat 57, Page 1143

    MCM Cat 56, Page 972

    Mfr. Info

    Tenma Logo
    Mfr. Name:Tenma
    Mfr. Part Number:72-6345