MCM Electronics

100W Multi Range 60V/5A DC Power SupplyMCM Part #: 73-1135  |  B&K Precision Part #: 9110

100W Multi Range 60V/5A DC Power Supply 5 stars from 1 review.
Login to rate or review this product

This compact switching power supply offers the unique capability of providing 100W output in any volt/amp combination within its 60V and 5A limits. By providing a wide range of power combinations, fewer supplies are required, saving money and valuable bench space. When the maximum of 60V is selected, the maximum current output is 1.66A. At the 20V setting, the maximum current output is 5A. Any volt/amp combination between these limits is achievable, as long as the 100W max output is not exceeded.

Product Description

  • Ultra compact size
  • Digitally controlled, mixed mode linear/switching
  • 10mV/1mA resolution over the full range
  • Bright, easy to read display
  • Low ripple and noise
  • OCP, OVP and OTP protection
  • Output On/Off control
  • Store and recall 4 x 100 groups of preset volt/amp values
  • Dimensions: 6.9" (H) x 3.47" (W) x 11.11" (D)
  • Model #9110

  • Product Reviews

    • "A fine lab grade power supply for the advanced hobbyist" by wb0rxx on 6/21/2011
      Overall: 5 out of 5
      Value:
      Quality:
      Top 25 Contributor

      This was my first “lab grade” power supply purchase. I bought it on sale for $224. This unit may seem initially expensive, but I feel that it is worth every penny. The output control is very smooth and the settings do not drift after releasing the control. The control can easily be locked with a single button, preventing accidental over-voltage issues. One of my favorite features is the ability to limit the absolute maximum voltage and/or current output settings. This will pay for itself the first time you accidentally twist the control too far and destroy your circuit/device. I have mine set to a maximum 14.4 VDC when working on mobile VHF rigs and it works like a charm. This unit has up to 100 programmable presets available. Quite frankly, I have never used them as it is fairly easy to setup whatever output you desire in just a few seconds. The output voltage and current seem to be quite accurate when compared to two Fluke volt meters. It also has a 0.01 V/1 mA display resolution, which I really like. The inside of the unit appears to be well built and made to laboratory-grade standards. But I expect nothing less from B&K Precision. The only minor issue worth mentioning is the lack of a ground strap between the negative and chassis ground binding post. I have worked with a fair amount of high-end test equipment over the years, and this is one of the few times that I have not seen such a strap provided . Yes, it is easy to just connect a wire between the posts, but would it have cost all that much extra to provide a nice looking $0.10 piece of copper? Overall, I really like this unit and find myself using it all of the time. I would highly recommend purchasing this unit if you need a high quality, laboratory grade power supply.

    • Rate It!

      Login Here to rate and review this product.

    Associated Products

    Image of Oscilloscope/Test Equipment Cart

    21-1925 - Oscilloscope/Test Equipment Cart

    •Slanted top allows technician to view equipment at a convenient angle •Lower shelf for storage •Heavy-duty casters •Adjustable back support with bumpers prevents damage to equipment •Gray •

    In Stock

    $109.00

    Buy Now
    Image of Logic Prove with Memory

    72-190 - Logic Prove with Memory

    Logic Probe with Memory This compact and lightweight probe recognizes high, intermediate, and low level pulses in DTL, TTL, HTL, and CMOS logic circuits.

    In Stock

    $19.99

    Buy Now

    Others Also Bought

    Image of Dual Output Bench Power Supply

    72-7245 - Dual Output Bench Power Supply

    Dual Output Bench Power supply Laboratory grade power supply provides adjustable 0 ~ 30VDC output, and 0 ~ 3A adjustable current limiting, on each of two isolated channels. Four independent three–digit LED displays simultaneously show output voltage and current ...

    In Stock

    $329.99

    Buy Now
    Image of 303 Standard Head

    106-350 - 303 Standard Head

    The 303 standard vise head works with the 300 series base to create a versatile vise for a variety of uses.

    In Stock

    $27.99

    Buy Now
    Package Specifications & Dimensions
    Weight:7.24 lbs.
    Hazardous:No
    Warranty:365 days
    Need to Return?
    Length:13.5 in.
    Width:10.5 in.
    Height:5.25 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages
    Catalog/Page:

    MCM Cat 57, Page 1268

    MCM Cat 56, Page 1105

    PDF Reference
    DatasheetManual

    Requires Adobe Acrobat Reader.

    Mfr. Info

    B&K Precision Logo
    Mfr. Name:B&K Precision
    Mfr. Part Number:9110