MCM Electronics

Bidirectional IDE to SATA ConverterMCM Part #: 83-11254  |  Distributed By MCM Part #: ADA-SY-BIR-IDESA-BP

Bidirectional IDE to SATA Converter 2.3 stars from 3 reviews.
Login to rate or review this product

Connect an IDE hard drive to your motherboard's SATA controller or connect a SATA hard drive to you IDE motherboard header with this RXD639 SATA to IDE converter! It features the SATAlink SPIF223A chipset and supports 3.5-inch IDE and SATA hard drives. It's compliant with SATA specification and supports up to UDMA/133 drives!

Product Description

  • Bidirectional IDE to SATA Converter
  • General Features:
  • SATAlink SPIF223A chipset
  • Compliant with Serial ATA specification
  • Supports large and small 4-pin power connectors
  • Ultra low power consumption
  • 150 MB/s transfer rate
  • Automatic Serial ATA 3.0/1.5 GBps speed negotiation
  • Connectors:
  • One (1) IDE connector
  • Two (2) SATA connectors
  • One (1) 4-pin power connector
  • Regulatory Approvals:
  • UL
  • CE
  • TUV

  • Product Reviews

    • "Works like it should for what I want." by Machexster on 9/6/2011
      Overall: 4 out of 5
      Value:
      Quality:

      It actually is inside a flimsy plastic case and is not just an exposed circuit board. So that is kind of good. I had success using it to connect a SATA Hard Drive to an older Firewire IDE bridge board. I was also made sure to set my HD to 1.5 GBps setting.(jumper on HD) The adapter only supports that and not the higher SATA speeds.

    • "Overpromised and underdelivered" by csylvain on 2/23/2011
      Overall: 1 out of 5
      Value:
      Quality:

      Having powered both the board and the drive by separate feed, I found this product did not work as an IDE to SATA converter. No jumper setting on the IDE CDROM drive, not Cable Select, not Master nor Slave had any positive effect. Both SATA connectors were tried, too. In one case, the BIOS would 'hang' for a while and not recognize the drive. In the other case, the BIOS would complain right away there was nothing active on the SATA port. For what I needed this product to do, it sadly did not deliver.

    • "Not detected" by ae4ef on 2/4/2011
      Overall: 2 out of 5
      Value:
      Quality:

      I only had one IDE slot on my motherboard, so this was purchased to free up my IDE slot. So, I was trying to make my IDE hdd appear as a SATA drive. The led light comes on (on the small converter board),but no joy on boot up when attached to the SATA connector. Great idea if it worked.

    • Rate It!

      Login Here to rate and review this product.

    Associated Products

    Image of 6 in Serial ATA Power Adapter  5 Pin Molex to 15 Pin SATA

    83-9943 - 6 in Serial ATA Power Adapter 5 Pin Molex to 15 Pin SATA

    Convert an existing 5.25" power connector into one serial ATA power connector. Adapts one 5.25" power connector into one Serial ATA power connector. Designed for Serial ATA hard drives, CD-ROOOCD-RWs, tape drives an mMs, CD-RWs, tape drives and more. 6" length.

    In Stock

    $3.49

    Buy Now
    Image of 20 in Serial ATA Hard Drive Cable

    83-9946 - 20 in Serial ATA Hard Drive Cable

    SATA drive cable Heavy duty molded cable Straight cable 20" Serial ATA drive cable

    In Stock

    $7.99

    Buy Now

    Others Also Bought

    Image of Professional Stereo Power Amplifier - 500W RMS X2 @ 8ohm

    555-12780 - Professional Stereo Power Amplifier - 500W RMS X2 @ 8ohm

    Stereo Power Amplifier This rack-mountable professional power amplifier packs a huge punch - 4100 watts of maximum power. This amplifier is equipped with dual ¼' and RCA inputs as well as dual speakon, ¼', and banana plug outputs. The dual output level controls a...

    In Stock

    $194.99

    Buy Now
    Image of 50' Gray Cat5e Ethernet Patch Cable

    831-1425 - 50' Gray Cat5e Ethernet Patch Cable

    These new cables offer data transmission rates of up to 155Mbps, a 50% improvement over standard Cat. 5 cables. Supports today’s 100Mbps fast ethernet standards. Specifications: 4 pair 24AWG unshielded wiring. RJ-45 connectors. Meets EIA/TIA 568B standards.

    In Stock

    $8.49

    Buy Now
    Image of 100' Gray Cat5e Ethernet Patch Cable

    831-1428 - 100' Gray Cat5e Ethernet Patch Cable

    These new cables offer data transmission rates of up to 155Mbps, a 50% improvement over standard Cat. 5 cables. Supports today’s 100Mbps fast ethernet standards. Specifications: 4 pair 24AWG unshielded wiring. RJ-45 connectors. Meets EIA/TIA 568B standards.

    In Stock

    $13.89

    Buy Now
    Package Specifications & Dimensions
    Weight:0.12 lbs.
    Hazardous:No
    Warranty:90 days
    Need to Return?
    Length:7 in.
    Width:6 in.
    Height:1.5 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages
    Catalog/Page:

    MCM Cat 57, Page 369

    MCM Cat 56, Page 342

    Mfr. Info

    Distributed By MCM Logo
    Mfr. Name:Distributed By MCM
    Mfr. Part Number:ADA-SY-BIR-IDESA-BP