MCM Electronics

Clear Raspberry Pi EnclosureMCM Part #: 83-14271  |  Multicomp Part #: MC-RP001-CLR

Clear Raspberry Pi Enclosure 4.6 stars from 7 reviews.
Login to rate or review this product

These Raspberry Pi enclosures are designed to give you maximum use of the Raspberry Pi board. Designed to allow viewing of the status LED's as well as proper airflow to keep your Raspberry Pi cool.

Product Description

  • Two piece construction, base and cover, moulded in a smooth finish ABS plastic
  • Base comes with four rubber feet and also features two screw slots to allow the enclosure to be vertically mounted
  • Cover can be easily removed without the need to unplug any cables
  • The cover features a tunnel recess to allow viewing of the operation LEDs
  • Vented base and cover to allow through air flow
  • Available in White , Black or Clear

Product Reviews

  • "better than I thought" by vfasano on 1/31/2014
    Overall: 3.5 out of 5
    Value:
    Quality:

    I've looked at these boxes for the Pi for a while, but resisted for various reasons, price being one. Couldn't fathom that a small plastic box could be worth the $7-$9 asking price. Finally gave in and included this on a recent order, and was pleasantly surprised. The box is well constructed, openings for ports fit perfectly, and the weight of the box seems significant. Of course, putting the Pi into the box blocks all the on-board connectivity - the expansion slots are completely inaccessible once the box is closed. But if this isn't a problem, then the box is probably worth the money - it's rugged, looks good, fits nicely, has vent slots. I was wrong - it's worth the money.

  • "Good Case but......" by dkjellqu on 6/7/2013
    Overall: 4 out of 5
    Value:
    Quality:

    Overall a good case. Model B fits well. However, note the case does NOT have an accessible slot opening for the GPIO connector. For the price you'll need to cut your own opening.

  • "Very nice case" by oskool on 3/8/2013
    Overall: 5 out of 5
    Value:
    Quality:

    This case is top notch. There's even vent holes in the Raspberry logo on top of the case, to let heat escape. The light pipe is cool, as are the rubber feet. It's hard to get the case to come apart. There's a total of 8 clips on the case. The 4 big ones are for holding the circuit board. There's also 4 hidden clips around the very bottom that are hard to see and hold the case together. The bottom half must remain level and even with the top half while pulling it apart. If someone tries to pull it apart with one side of the case jacked way up in the air, most likely a tab will break off.

  • "Solid, well designed case" by jaspergeu on 1/14/2013
    Overall: 5 out of 5
    Value:
    Quality:

    Great quality, nice features (rubber feet, mounting points on back) , fits the Raspberry Pi perfectly. Although for what I'm doing with it having the SD card not sticking as far of the the case would have been nice. Clear plastic makes it fun.

  • "Fits like a glove" by lambchops42 on 1/10/2013
    Overall: 4.5 out of 5
    Value:
    Quality:

    Fits around all of the ports nicely - no gaps. Tool-less installation - it's just a bunch of plastic clips The case is sturdy Has lots of ventilation on the bottom cover but very little on the top. No place for GPIO

  • "Nice fit and price!" by egsavage on 1/5/2013
    Overall: 5 out of 5
    Value:
    Quality:

    The RPi fits nicely in this case. I was a little concerned with the clearance on some of the sockets in that they didn't protrude much beyond the case and I thought cables might not seat correctly in the RPi. My concerns were unfounded - all cables seat just fine even though the sockets are near flush or even recessed a little within the case. A note if you're using the GPIO header (which I am not currently): There is no hole on the stock case. You could always add your own hole with a small rotary saw and a file.

  • "Simple, clean, nice" by robcranfill on 12/25/2012
    Overall: 5 out of 5
    Value:
    Quality:

    I have tried two RPi cases, now, and so far this is my favorite by far. It's compact, snugs up around the various I/O ports nicely (that is, there are minimal gaps between the connectors and the case) and I really like the way they molded what amounts to a light-pipe from the indicator lights to the surface of the case - it makes it easy to see status from far away.

  • Rate It!

    Login Here to rate and review this product.

Others Also Bought

Image of 512MB Raspberry Pi Model B Project Board

83-14421 - 512MB Raspberry Pi Model B Project Board

The Raspberry Pi is a small SBC (Single Board Computer) perfect for learning programming or using as a small desktop PC. It supports both HDMI and composite video which makes it very versatile for both business and educational environments. The Raspberry Pi can do...

In Stock

$35.00

Buy Now
Image of Raspberry Pi Model B Board with 8GB O/S Card

83-15499 - Raspberry Pi Model B Board with 8GB O/S Card

Save some money by bundling the Model B Raspberry Pi with an 8GB card, featuring six different operating systems. Includes: Raspberry Pi Basic Board Model B 8Gb SD Card loaded with the your choice of 6 different Raspberry Pi optimized operating systems

In Stock

$39.99

Buy Now
Image of Wi-Pi Raspberry Pi 802.11n Wireless Adapter

831-3058 - Wi-Pi Raspberry Pi 802.11n Wireless Adapter

A 802.11n compliant wireless client for your Raspberry Pi installation. Tested with the Raspberry Pi release of Debian Linux. Drivers are built into the Raspberry Pi software release and like most other adapters it supports WPA and WPA2 security features.

In Stock

$9.69

Buy Now
Package Specifications & Dimensions
Weight:0.1 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:180 days
Need to Return?
Length:4 in.
Width:2.5 in.
Height:1.25 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 56, Page 330

PDF Reference
Datasheet

Requires Adobe Acrobat Reader.

Mfr. Info

Multicomp Logo
Mfr. Name:Multicomp
Mfr. Part Number:MC-RP001-CLR