MCM Electronics

Arduino 7 Piece Sensor PackMCM Part #: 83-15147  |  Distributed By MCM Part #: LS_SENPACK_101_M31

No reviews yet!
Login to rate or review this product

A pack of 7 sensors for use with the Arduino platform Ambient Light Senor Breakout (Three pins: VCC, GND and Sensor Output) Ball-rolling Vibration Sensor Breakout (Three pins: VCC, GND and Sensor Output) Flame Sensor Breakout (Three pins: VCC, GND and Sensor Output) Infrared Road Block Sensor Breakout (There are four pins: enable, output signal, power, ground) Potentiometer Breakout (Three pins: VCC, GND and Sensor Output) Path Tracking Sensor for Robotics (Three pins: VCC, GND and Sensor Output) Tilt Sensor breakout Three pins: VCC, GND and Sensor Output ...(read more below)

Product Description

A pack of 7 sensors for use with the Arduino platform

  • Ambient Light Senor Breakout (Three pins: VCC, GND and Sensor Output)
  • Ball-rolling Vibration Sensor Breakout (Three pins: VCC, GND and Sensor Output)
  • Flame Sensor Breakout (Three pins: VCC, GND and Sensor Output)
  • Infrared Road Block Sensor Breakout (There are four pins: enable, output signal, power, ground)
  • Potentiometer Breakout (Three pins: VCC, GND and Sensor Output)
  • Path Tracking Sensor for Robotics (Three pins: VCC, GND and Sensor Output)
  • Tilt Sensor breakout Three pins: VCC, GND and Sensor Output)

Additional Information

  • Infrared Road Block Sensor Breakout
    • SolidDigi infrared roadblock sensor use an integrated infrared transceiver. 74LS00 is used to construct a resonator. Adjusting the potentiometer adjusts the frequency of the infrared light to be the center of receiver, i.e. 38kHz. Now the receiver has the highest sensitivity. Adjusting the second potentimeter will adjust the transmit intensity to meet the requirements of sensing distance.

      The ballback working distance is longer than 20cm.

      There are four pins: enable, output signal, power, ground. Jumper can be used to always enable. When there is object/roadblock in front of the sensor, the LED will turn on, and the out signal will be HIGH.

  • Potentiometer Breakout
    • A simple potentiometer breakout that can be used to adjust signal level in robotics
  • Path Tracking Sensor for Robotics
    • The Path tracking sensor uses a reflective infrared sensor (tcrt500). The infrared light is emitted and reflected back to the receiver, it's then inverted by 74LS14 and output to the output pin and the LED. The output signal is a digital signal.

      There is 3 output pins: output signal, power supply and ground.

      On a white surface, the output signal will be HIGH. On a black/non-reflective surface, the output signal will be low and the LED is off. The working distance from the sensor to the surface is around 1.5cm.

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Others Also Bought

Image of Double Sided Foam Tape

28-955 - Double Sided Foam Tape

•Thousands of uses •Fasten accessories to car dash, etc. •3/4" x 61/2' roll

In Stock

$4.19

Buy Now
Image of VHS Head Cleaner

80-6875 - VHS Head Cleaner

VCR Head Cleaner safely and effectively cleans tape heads and entire tape path Non-abrasive Exclusive cleaning material prevents debris from re-depositing on heads Wet type

In Stock

$8.99

Buy Now
Package Specifications & Dimensions
Weight:0.1 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:180 days
Need to Return?
Length:2.9 in.
Width:4.1 in.
Height:1 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 671

Mfr. Info

Distributed By MCM Logo
Mfr. Name:Distributed By MCM
Mfr. Part Number:LS_SENPACK_101_M31