MCM Electronics

White Pi Face Digital Case with Camera CutoutMCM Part #: 83-15257  |  Raspberry Pi Part #: 2299865

White Pi Face Digital Case with Camera Cutout 2.8 stars from 4 reviews.
Login to rate or review this product

The PiFace enclosure is designed to hold both the Raspberry Pi and the PiFace digital add-on board. the case is cutout to offer access to all the usual Raspberry Pi ports plus all the PiFace digital I/O ports

These case are designed for the following accessories

Raspberry Pi Board's
PiFace Diigtal Board
Pi Camera
PiNoir Camera

Product Description

    • Designed to house the Raspberry Pi and via clip-in grooves - no screws required !
    • All cut-outs are pre-cut into the case - no modifications are required !
    • Wall mountable
    • Supplied with four Rubber feet
    • Supplied with LED light pipes
    • Supplied with four actuators
    • High Gloss Finish
    • Thickness 3mm: HB Rated
    • Colored Materials: • High Impact Polystyrene (HIPS)
    • White Finish: Acrylic Capped ABS
    • Light Pipes: Transparent Acrylic
    Package includes
    • 2 Light Pipes
    • 4 Actuators
    • 4 Rubber feet

View the entire range

Product Reviews

  • "Need bigger version for future, versatile web appliance" by on 6/11/2014
    Overall: 3.5 out of 5

    I have been able to use the case to build a rudimentary web-appliance, called the Fracking Detector Kit. I could hold the Pi, and a second partial board for accepting sensor signal, data acquisition intobthe Pi.
    A bigger case, that can hold a full-sized sensor-probe, signal conditioning; as well a third, A2D board will enable a connected experimentation station, in the vein of Internet of Things applications, for education, and a whole spectrum of applications.

  • "Hard to open first time and missing parts!" by CobyBean on 5/11/2014
    Overall: 2.5 out of 5

    This case had protective plastic on both the outside and inside! Instructions on how to open it would of been real helpful! You can't just pull the two pieces apart. One must pry the end open first. Small tabs would of helped or even a picture demonstrating how to open. I guess you don't need or get "light pipes" with clear case but what about the actuators? I got the feet and a cracked corner but it is still functional. How is the camera cut-out used? Better documentation would be helpful!

  • "Quality is good." by wbrouwer on 12/3/2013
    Overall: 4 out of 5

    Tricky to install the raspberry PI and Piface board with the supplied buttons. Ended up loosing one to the buttons as I struggled to fit everything together.

  • "Good idea, poorly implemented" by scottymace on 9/14/2013
    Overall: 1 out of 5

    The bottom part seems to be designed OK. The main problem with it is the poorly thought out "light pipe" design. A tiny piece of unpolished plexiglass, that you have to press-fit into a share recess, and it's dim. It's difficult to do, and doesn't stay put. The top half is a disaster. The "light pipe" for that just sits in a recess, and never stays put during assembly, (which you have to do upside down to keep everything in place. I had to superglue the pipe, because it would never stay put after assembly. Again, the pipe is unpolished, and the light is very dim. Once assembled, the sides of the top, which are spread during assembly, never seat properly, and it's very noticeable. Unfortunately this is the only case I could find for the RPI and Pi-Face, so I'll have to make do...

  • Rate It!

    Login Here to rate and review this product.

Others Also Bought

Image of Wi-Pi Raspberry Pi 802.11n Wireless Adapter

831-3058 - Wi-Pi Raspberry Pi 802.11n Wireless Adapter

A 802.11n compliant wireless client for your Raspberry Pi installation. Tested with the Raspberry Pi release of Debian Linux. Drivers are built into the Raspberry Pi software release and like most other adapters it supports WPA and WPA2 security features.

In Stock


Buy Now
Image of Raspberry Pi™ 2 Model B 1GB Project Board

83-16530 - Raspberry Pi™ 2 Model B 1GB Project Board

The Raspberry Pi 2 is a single-board computer developed in the UK by the Raspberry Pi Foundation. The Raspberry Pi is a credit-card sized computer that plugs into your TV and a keyboard. It’s a capable little PC which can be used for many of the things that your d...

In Stock


Buy Now
Image of 5MP Raspberry Pi Camera Board

28-17733 - 5MP Raspberry Pi Camera Board

The Raspberry Pi Camera Module is a 5 megapixel custom designed add-on for Raspberry Pi, featuring a fixed focus lens. It's capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. It attaches to Pi by way of one of th...

In Stock


Buy Now
Package Specifications & Dimensions
Weight:0.25 lbs.
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:5 in.
Width:4 in.
Height:5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages

MCM Cat 57, Page 662

PDF Reference

Requires Adobe Acrobat Reader.

Mfr. Info

Raspberry Pi Logo
Mfr. Name:Raspberry Pi
Mfr. Part Number:2299865
Intorducing the new Raspberry Pi 2 - Now 6x faster
Same low price and size. More memory faster quad core procesor