A 40 eye-blistering RGB LED shield for Arduino Microcontroller Boards. Arranged in a 5x8 matrix, each pixel is individually addressable. Only one pin (Digital #6) is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need some customization.
The LEDs are powered from the 5v Arduino power supply. As long as you aren't lighting up all the pixels full power white that should be fine. You can also solder in the included terminal block (pro-tip: put it on the bottom of the board so it doesn't stick up) to attach an external 4-6VDC power supply. There's a polarity protection FET on there in case you wire the power backwards
- Dimensions:53.36mm / 2.1" x 68.85mm / 2.7" x 3.22mm / 0.12"
- Weight: 27.10g
You can find a great tutorial over at Adafruit - Learn Neopixels Uberguide
|MCM Part #:||83-15708|
|Adafruit Industries Part #:||1430|
|Package Specifications & Dimensions|
Need to Return?
|Extra Shipping Charge:||No|