You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino or by just wiring up with the Servo library. Comes with a few horns and hardware.
To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position ""0"" (1.5ms pulse) is middle, ""90"" (~2ms pulse) is all the way to the right, ""-90"" (~1ms pulse) is all the way to the left.
- Size : 23x11x29 mm
- Voltage : 3V to 6V DC
- Weight: 9g / 0.32oz
- Speed : 0.12 sec/60 (at 4.8V)
- Torque : 1.6 kg-cm
- Working Temp : -30C~60C
- Teflon Bushing, 19cm wire, coreless motor, servo arms & screw included