MCM Electronics

12V Brass Liquid Solenoid ValveMCM Part #: 28-17460  |  Adafruit Industries Part #: 996

No reviews yet!
Login to rate or review this product

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening, aquarium, or pool project. There are two 1/2"" (Nominal NPT) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and water can flow. Unlike the plastic solenoid valve, this one does not have a gasket, so there is no minimum pressure requirement.

Product Description

We tried this solenoid at various DC voltages and found we could actuate it down at 6VDC (although it was a little slower to open). Here is the current draw table for various voltages. We suggest a TIP120 or N-Channel power FET with a 1N4001 kickback diode to drive this from a microcontroller pin. For a power supply, a 12V 5A power adapter will do the job.

If you want smaller, more basic valve, we also carry a plastic version which does have a minimum pressure requirement but has much lower power requirements (MCM Part# 28-17449).

Features

  • 1/2"" Nominal NPT
  • Working Liquid Pressure: 0 Mpa - 1.0 Mpa (140 PSI)
  • Working Temperature: -5℃ - 80 ℃
  • Actuating voltage: 12VDC (but we found it would work down to 6V)
  • Actuating life: ≥ 50 million cycles
  • Weight: 1.7lbs
  • Dimensions: 105mm tall x 55mm wide x 65mm long
Voltage- Current
  • 6V- 1.6 A
  • 7V- 1.86 A
  • 8V- 2.0 A
  • 9V- 2.3 A
  • 10V- 2.5 A
  • 11V- 2.7 A
  • 12V- 3 A
These solenoids are not rated for food safety by any official standards. However, they are made of cast brass, with a rubber gasket made of NBR (Nitrile Rubber) so it can be used with any fluid that will not damage or be damaged by the rubber gasket material.

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Others Also Bought

Image of 12V Plastic Water Solenoid Valve

28-17449 - 12V Plastic Water Solenoid Valve

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2"" (Nominal NPT) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve ...

In Stock

$6.49

Buy Now
Image of USB AVR Programming Tool

83-15690 - USB AVR Programming Tool

This device is a programmer for AVR-based controllers, such as our Orangutan robot controllers and the 3pi robot. The programmer emulates an STK500 on a virtual serial port, making it compatible with standard AVR programming software. Two additional features help ...

In Stock

$21.10

Buy Now
Image of WESD51 Digital Soldering Station

96-1764 - WESD51 Digital Soldering Station

Innovative heater and sensor combination gives you quick heat-up and rapid temperature recovery Wireless temperature lockout to prevent operators from raising the temperature to levels higher than specified for the board or component Station automatically power...

In Stock

$139.00

Buy Now
Sale Price:
$22.49 
MSRP: $24.95
You Save: $2.46 (10 %)
Qty.Volume Price
10+$21.82
or Notify me when in stock
Notify me when in stock
Send me promotional emails
Package Specifications & Dimensions
Weight:1 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:180 days
Need to Return?
Length:4 in.
Width:3 in.
Height:2.5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 746

Mfr. Info

Adafruit Industries Logo
Mfr. Name:Adafruit Industries
Mfr. Part Number:996