MCM Electronics

Rack Mount Eight Channel Mixer with EqualizerMCM Part #: 555-8455  |  Applied Research Technology Part #: MX821S

No reviews yet!
Login to rate or review this product

8 Ch (1U) Mic/Line Mixer with Stereo Outputs

The ART MX821S is a versatile rack mount mixer combining eight independent input channels into a stereo line-level output. Each input channel accepts a balanced XLR microphone input or unbalanced 1/4" TS line-level signal and provides independent level and pan controls.

Product Description

+48 Volt phantom power may be independently selected on each microphone input. A master level control adjusts the signal output to the low-impedance balanced 1/4" TRS jacks. Prefade output (not affected by the master level control) and Aux Bus input RCA jacks allow patching of multiple units when more channels are needed.

The ART MX821S may be used on stage, in the studio, or for permanent install applications including conference rooms, corporate boardrooms, churches, restaurants, small clubs, health clubs and more. A built-in power supply and single high 19" rack mount format allows for easy installation and reliable long-term operation.

    Features
  • Eight input channels with individual level and pan controls
  • Pan controls place each input mono signal anywhere in the output stereo image
  • Balanced microphone XLR or unbalanced 1/4" TS inputs on each channel
  • Full +48V low noise phantom power switchable for each microphone input
  • Balanced left and right 1/4" TRS main output jacks with master level control
  • Prefade Output jacks and Aux Bus Input jacks allow units to be chained to provide extra inputs
  • Each line input jack may be individually converted to a direct line output by means of internal jumpers
  • Rugged 1U rack-mount steel chassis with built-in power supply
  • Perfect for stage, studio and permanent installations

Specifications
Input Connections XLR female balanced (Mic, channels 1-8)
1/4" TS unbalanced (Line, channels 1-8)
RCA unbalanced (Aux Bus In, Left and Right)
Output Connections 1/4" TRS balanced (Main Outputs, Left and Right)
RCA unbalanced (Prefade Out, Left and Right)
Input Impedance 2k Ohms (Mic), 20k Ohms (Line), 51k Ohms (Aux Bus In)
Output Impedance 200 Ohms (Main Outputs, balanced),
100 Ohms (Prefade Out)
Frequency Response 20 Hz - 20 kHz (+0, -1 dB) (CH 1-8 in, M
Total Harmonic Distortion <0.01% @ 1 kHz, typical
Phase Response All connections are phase coherent
Signal to Noise Ratio >99dB typical (Ref 0dBu)
CMRR >43 dB typical
Maximum Input Level -4 dBu (Mic), +22 dBu (Line)
Maximum Output Level +24 dBu (balanced), +18 dBu (unbalanced)
Maximum Gain 54 dB (Mic), 29 dB (Line)
Phantom Power Switch Selectable, +48V DC (regulated and filtered), 7 mA current limiting per l
Dimensions 1.75" x 19" x 6" (4.5cm x 48.3cm x 15.2cm)
Weight 6.3 lbs. (2.9 kg)
Power Requirements USA: 95-125 VAC, 50-60 Hz, <15W

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Others Also Bought

Image of Male/3 pin X Series XLR Connector

NC3MX - Male/3 pin X Series XLR Connector

The worldwide accepted standard. Rugged die-cast shell, compact design (shortest available XLR cable connector). Time saving assembly, four parts, no screws. Unique chuck type strain relief. Solder type. Male 3 pin

In Stock

$2.39

Buy Now
Image of Three Pin DMX Cable - 10'

555-11902 - Three Pin DMX Cable - 10'

10' DMX Cable Highly flexible cable features single pair with shield construction and 110Ω nominal impedance. It is specifically designed for use with DMX controlled professional lighting and effects fixtures. It is terminated with rugged metal 3-pin XLR ma...

In Stock

$5.29

Buy Now
Image of Female/3 pin X Series XLR Connector

NC3FX - Female/3 pin X Series XLR Connector

The worldwide accepted standard. Rugged die-cast shell, compact design (shortest available XLR cable connector). Time saving assembly, four parts, no screws. Unique chuck type strain relief. Solder type. Female 3 pin

In Stock

$2.89

Buy Now
Package Specifications & Dimensions
Weight:6 lbs.
Hazardous:No
RoHS Comp:Yes
Warranty:365 days
Need to Return?
Length:21 in.
Width:10.5 in.
Height:3.75 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 014

MCM Cat 56, Page 173

PDF Reference
Manual

Requires Adobe Acrobat Reader.

Mfr. Info

Applied Research Technology Logo
Mfr. Name:Applied Research Technology
Mfr. Part Number:MX821S
Intorducing the new Raspberry Pi 2 - Now 6x faster
Same low price and size. More memory faster quad core procesor