EAGLE (CAD) Files: LilyPad_v18.zip
Programming the LilyPad
- Microcontroller: ATmega168V or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Input Voltage: 2.7-5.5 V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- Flash Memory: 16 KB (of which 2 KB used by bootloader)
- SRAM: 1 KB
- EEPROM: 512 bytes
- Clock Speed: 8 MHz
The LilyPad Arduino can be programmed with the Arduino software (download). *Note*, the LilyPad Arduino should only be programmed with software versions 0010 or higher. You can program it with earlier versions, but all of the time related functions will be off (twice as slow as they should be).
The LilyPad Arduino is a circle, approximately 50mm (2") in diameter. The board itself is .8mm (1/32") thick (approximately 3mm (1/8") where electronics are attached).
Wash at your own risk - we do ;). We recommend washing projects by hand with a mild detergent. Drip dry. Make sure you remove your power supply first!
To get your LilyPad Arduino working, see this guide.
The LilyPad is compatible with all of MCM's wearable accessories which can be found (here)
|MCM Part #:||83-16644|
|Arduino.org Part #:||DEV-09266|
|Package Specifications & Dimensions|
Need to Return?
|Extra Shipping Charge:||No|