The DeoxIt Rosin Soldeing Flux permits soldering of even difficult metals such as brass or nickel.
It leaves a greasy residue on finished work if applied to the joint to be soldered. For that a rosin in alcohol flux may be preferable but I have found it good for tinning a soldering tip. Set the iron to a fairly low temperature such as 600 degrees F see that there is some solder on the tip then brush the tip on the edge of this paste or briefly immerse it. The tip will be evenly tinned with whatever solder you are using and the flux residue mostly evaporates.
I would recommend this to anyone - provides a good way for the solder to stick, and isn't too smokey.
Requires Adobe Acrobat Reader
200-350 - Flux Wash Val-U Series - 10 oz.
Clean and remove fluxes, light oils, waxes, grease, and silicone
Safe on most plastics
200-390 - DeoxIT Tip Tinner Cleaner/Tinner Compound, Lead Free
Keeps soldering tips clean and longer lasting Protects tips from oxidizing
21-1840 - 44 Rosin Core Solder - 60/40 - 1 lb. x .031'' - 21 Gauge
The famous Kester "44" rosin core solders contain a high active noncorrosive flux with excellent wetting action, and are specifically designed for electrical/electronic applications
28-955 - Double Sided Foam Tape
Thousands of uses Fasten accessories to car dash, etc. 3/4" x 61/2' roll
22-24120 - 22" Black Tactical Weatherproof Equipment Case
Durable equipment case provides maximum shock protection for contents making it useful for instruments, audio/video equipment, tactical gear, photographic equipment and test equipment. Pre-cut cubed foam insert (top layer only) is easily customizable to fit nearly...
35-5170 - 10MM High Performance Earbud
High Performance Earbud
Lightweight, stylish, high performance earbuds give crystal clear sound as well as a comfortable fit. Ideal for use with CD, MP3, MP4 and any other small portable audio players.
I've ordered several times from MCM and have always been very satisfied with their products, service and shipping.