MCM Electronics

5W x 1Ch Audio Amplifier Module By Cebek (E-2) MCM Part #28-4796

5 stars 1 review
Qty.Volume Price

5W x 1Ch Audio Amplifier Module

Pre—assembled audio amplifier boards may be used for many applications including repair or modification of equipment, projects or prototype work. They are easily installed into existing enclosures, speaker cabinets or audio equipment. Accepts line level input, provides rated output, RMS into 8ohm load, and are usable with 4ohm loads.

Specifications Top

  • Mono amplifier module
  • Requires 12VDC/200mA power supply
  • Size: 50 x 40 x 20 mm / 1.97" x 1.57" x 0.79"

Voltage12VDC (6-15V)
Minimum consumption100 mA
Maximum consumption500 mA
Input Sensitivity100 mV
Maximum Input Signal 1V
Output Impedance4 - 8 Ohms
Frequency Range30 - 18,000 Hz
5 W Distortion1 %
RMS Power5 W
Musical Power7.2 W
Part Numbers
MCM Part #:28-4796
Cebek Part #:E-2
Package Specifications & Dimensions
Weight:0.098 lbs.
RoHS Comp:Yes
Warranty:90 days
Need to Return?
Length:7 in.
Width:3.5 in.
Height:1.5 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No

Product Reviews Top

  • by Barry8Tracks

    on 2/26/2014

    Great little amplifier!

    Overall: 5 out of 5

    Okay, I'll admit that I purchased this so I could reverse-engineer it and rebuild it on a tiny board about 1 inch by 1-1/4 inch. My plan is to use this circuit to fit in the place of a defective output transformer in vintage car stereos. I was happy to hear that the output is equal to (and in some cases much greater than) the "good" side and often requires an input level control to knock down the volume to match the other channel. Shares common grounds between input, output and power, runs forever at loud volume without excessive heat. Very efficient, nice little amp!

Associated Products

Image of Magnetic Parts Tray

22-5820 - Magnetic Parts Tray

•Keep your wrenches, sockets, and parts safe and close at hand •Made of heavy duty stainless steel •Prevents items from rolling or sliding •Locks on to any ferrous surface and work at any angle •

In Stock


Buy Now
Image of Heavy Duty Crimp Tool For      Solderless Terminals 10-22awg

22-770 - Heavy Duty Crimp Tool For Solderless Terminals 10-22awg

•Crimps insulated solderless terminals for wire gauges 22~10 •Ratcheting action ensures a full crimp cycle for positive connections •Locks in the closed position for storage

In Stock


Buy Now

Others Also Bought

Image of 12VDC Programmable Buzzer

50-2992 - 12VDC Programmable Buzzer

Programmable Indicator This device connects to any 12VDC source in the same manner as commonly available buzzers and piezo sounders, yet allows you to program up to 30 seconds of any WAV or MP3 file via USB from your computer. With the flexibility of programming ...

In Stock


Buy Now