MCM Electronics

Rack Mount Stereo Amplifier 1050w X 2Ch Max at 2 OhmsMCM Part #: 555-22460  |  Crown Audio Part #: XLS2000

No reviews yet!
Login to rate or review this product

XLS DriveCore Series Power Amplifier

Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx limiters protect your speakers. Simply put, the XLS is most reliable, versatile, efficient amp available today.

Product Description

    Features
  • 650W per channel at 4 ohms
  • XLS High Performance, Lightweight Class D amp weighs less than 11 lbs.
  • Integrated PureBand Crossover System for better performance and control
  • Peakx Limiters provide maximum output while protecting your speakers
  • XLR, 1/4", RCA inputs provide outstanding flexibility
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touchproof binding post and Speakon outputs
  • Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Specifications
2 Ohm Dual (per channel) 1,050W
4 Ohm Dual (per channel) 650W
8 Ohm Dual (per channel) 375W
8 Ohm Bridge 1,300W
4 Ohm Bridge-Mono 2,100W
Sensitivity (for full rated power at 4 ohms) 1.4 Vrms
Frequency Response (at 1 watt, 20 Hz - 20 kHz) +0dB, -1dB
Signal-to-Noise Ratio Rated as dBr to full rated 8 ohm power output (A-Weighted):
XLS1000 > 97 dB
XLS1500, XLS2000, XLS2500 > 103dB
Damping Factor (8 ohm): 10 Hz to 400 Hz > 200
Crosstalk (below rated 8O power) At 1 kHz: > 85dB
At 20kHz: > 55dB
Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced
Load Impedance 2 to 8 ohms per channel in Stereo
4 to 8 ohms in Bridge Mono
AC Line Voltage and Frequency Configurations Available (± 10%) 120 VAC 60 Hz
100 VAC 50/60 Hz
>220 and 240 VAC 50 Hz
Ventilation Flow-through ventilation from front to back
Cooling Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
Air Volume Requirements (per minute per unit) 80.15 ft3 (2.27 m3)
Integrated Processing PureBand Crossover System
Crossover Filter: Linkwitz-Riley 24dB per Octave
Crossover Frequency Range: 50 Hz - 3 kHz
Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF).
Peakx limiters: Channels independent clip limiter designed to provide maximum output while protecting your loudspeakers
Input/Output Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers.
Output Connectors: Two 4-Pole Speakon Output Connectors accept 2-pole or 4-pole Speakon connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two speakers to a single Spekon connector.
One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.)
Construction XLS1000/XLS1500: 8.12-Inch (20.62cm) depth
XLS2000/XLS2500: 10.35-Inch (26.29cm) depth
Dimensions EIA Standard 19-Inch (48.3-cm) rack mount width (EIA RS-310-B), 3.5-Inch (8.9-cm) height. XLS 1000/1500: 7.7-Inch (19.6-cm) depth. XLS 2000/2500: 10.7-inch (27.2-cm) depth.
Net Weight, Shipping Weight XLS1000: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
XLS1500: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
XLS2000: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)
XLS2500: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)

Product Reviews

  • Rate It!
    Be the first to rate this product!

    Login Here to rate and review this product.

Associated Products

Image of 8 Switched Outlet Rack Mount Outlet Strip

28-11161 - 8 Switched Outlet Rack Mount Outlet Strip

Perfect for power distribution racks or DJ applications requiring individual switched and grounded outlets. Attached heavy duty 10' grounded power cord provides extra length needed when installed in large racks. Includes removable rack ears and base feet.

In Stock

$45.99

Buy Now
Image of Large PAN Head Rack Screws     With Washer 100 Pack

555-20850 - Large PAN Head Rack Screws With Washer 100 Pack

100 Pack of Pan Head Rack Screws #10-32 x 0.625" screws are designed for mounting equipment in standard 19" racks. Large head and integral nylon washer protects equipment faceplate. Sold in packages of 100.

In Stock

$20.99

Buy Now

Others Also Bought

Image of 3FT XLR Male To Female         Single Channel Balanced

24-13031 - 3FT XLR Male To Female Single Channel Balanced

These male-to-female balanced patch cables are designed to connect gear with XLR outputs with XLR inputs. They are ideal for use in touring and other live sound and stage applications.

In Stock

$5.29

Buy Now
Image of 25' Hosa Pro XLR Male to Female Microphone Cable

24-13608 - 25' Hosa Pro XLR Male to Female Microphone Cable

Hosa Pro Microphone Cables are engineered to deliver years of rock-solid reliability. Combining REAN® connectors by Neutrik AG with world-class manufacturing techniques, they redefine what performance and value are all about.

In Stock

$17.59

Buy Now
Image of 6V 7.0Ah Sealed Lead Acid Battery

29-3090 - 6V 7.0Ah Sealed Lead Acid Battery

CSB batteries are used for UPS, emergency lighting, security and any floating application. Maximum charging current is nominal capacity times 0.3. All dimensions are in inches. Connection: A=.187" disconnect, B=.250" disconnect, C= bolt and...

In Stock

$15.49

Buy Now
Package Specifications & Dimensions
Weight:14.35 lbs.
Hazardous:No
RoHS Comp:No
Warranty:1095 days
Need to Return?
Length:22 in.
Width:14.5 in.
Height:6 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages
Catalog/Page:

MCM Cat 57, Page 008

PDF Reference
Datasheet

Requires Adobe Acrobat Reader.

Mfr. Info

Crown Audio Logo
Mfr. Name:Crown Audio
Mfr. Part Number:XLS2000