Passive speaker crossover provides 12dB/octave slope at 800Hz and 6KHz, 300W max power capacity. Designed for 8ohm drivers.
i am enjoying ALL the products that i ordered.. I especially like the quick shipping time and how easy it is to order on line...thanks again.....Walt
There are a couple of design flaws in these crossover networks so I'll start with those. The coils should be positioned so as to avoid mutual inductance. This does not seem to be a great issue in the current layout but could be further reduced. The second problem is in how the components are mounted. I've obtained preassembled crossover networks that used zip ties to mount the inductor coils to the board. When I got these one of the coils broke from the solder connections and I had to spend some time unwinding and then rewinding the coil wire to have enough wire sticking through the board to resolder the connections. It must have been knocked around pretty good in shipping as the glue wasn't strong enough to hold.
The good points are audio grade capacitors, speaker protection and the addition of a resistor to tame the tweeter.
Login Here to rate and review this product.
40-1115 - Audio-Technica Magnetic Styli
MAGNETIC CARTRIDGE STYLUS AUDIO TECHNICA ATS-11E Magnetic Styli, Type: Audio-Technica, Manufacturer Number: ATS-11E, Used in AT-11E, Akai Dual, EV, JVC, etc.
50-14160 - ABS Speaker Port Tube - 3" Diameter, 4 1/3" Length
ABS Speaker Port Tube
Present a clean and professional appearance when porting a speaker enclosure with these molded tubes
53-1380 - 1" Soft Dome Tweeter with 104mm Round Frame
1” Soft Dome Tweeter
This high-quality dome tweeter is perfect for repair, upgrade, or new speaker construction. Specially designed baffle plate provides improved, even dispersion pattern.
MCM Cat 57, Page 181
MCM Cat 56, Page 308