MCM Electronics

7" LCD Multifunction CCTV Tester for HD-SDI and IP/PoE By Defender Security (82-18193) MCM Part #82-18193

1 stars 1 review
$279.00 
& FREE Shipping
MSRP: $399.00
You Save: $120.00 (30 %)

This HD multi-function 7" LCD tester allows you to focus-adjust analog and HD analog cameras, and ping/address-scan IP cameras. It also has many other functions for both analog and IP camera testing all packed into one easy to carry, long-lasting, rugged field tester. Now you can significantly reduce your installation time and save hours of labor field focusing analog cameras, testing IP network and cable connections, setting up and testing PTZ protocols and settings, and troubleshooting signal problems on-site.

Specifications Top

    Highlights:
  • 7 inch LCD HD-SDI Tester with PoE
  • HD-SDI input & output (including standard analog in/out; note: newer HD-TVI, HD-CVI and AHD high-def video over coax not yet supported)
  • VGA signal input to test and set DVR or NVR
  • DC12V 2A power output to camera
  • PoE++ (24W) power output to PoE-enabled IP camera
  • USB 5V 2A power output to mobile phone
  • Video level meter
  • Cable scan
  • IP camera ping testing and address search (note: tester cannot display IP camera image)
Summary:

This HD-SDI tester offers technicians a wide range of features to simplify CCTV camera installations. Power, focus and aim your cameras locally without a trip back to the control room. The unit´s bright screen and easy to use menu are ideal for outdoor use. A lanyard and a hand strap are included to ease installs in locations.

The device allows the installer to control PTZ cameras that accept data over RS232, RS422 simplex or RS485 ports. The Address Search feature can be used to run a search and determine a PTZ unit´s address. The UTP cable test feature checks for connectivity across all 8 wires and also displays the pin-to-pin connections of the RJ45 connectors.

The unit includes a rechargeable Lithium Ion Polymer battery that charges for 7 hours and can last up to 17 hours in the field. An auxiliary 12VDC, 2A power supply can be used to locally power and adjust cameras in the field or on a test bench. The RS485 data capture feature displays the code output of serial control devices.

And it supports more than twenty PTZ protocols (e.g., Pelco-P, Pelco-D, Samsung, Panasonic, CBC, Bosch, TeleEye, Vicon, Sanyo-SSP).

Other functions include PoE voltage testing, PoE port flicker, PoE link monitoring, IP camera´ping testing, and IP address scan. Video images can also be zoomed in 1-10 times and there's also video snapshot/screenshot and video record and playback to a microSD card (4GB included). NTSC/PAL video is auto-selected, and the video signal measurement (IRE) let's you determine signal strength. You can setup function presets and user-defined short-cut keys, and the LED display has a night time mode.


    Main Features
  • 7.0" LCD with 800x600 resolution
  • Video signal level meter
  • PTZ camera controls
  • Unique 12VDC 2A power output to power camera with 3' pigtail
  • RS485/RS422 input and data logging
  • Network cable tester (opens, shorts, etc.)
  • RS232 input
  • 3.5mm audio input
  • Built in speaker
  • Color bar signal generator
  • Up to 17 hour battery life
  • 7 hour recharge time
  • BNC input with 3' M-to-M BNC pigtail
  • 12VDC 2A output to power camera with 3' pigtail
  • 5VDC 2A AC adapter powers and charges tester
  • Li-ion 7.4V 6500mAh rechargeable battery (replacement battery available)
  • Carrying case included

  • Features:

    Port flicker
    The tester will send special signals to make the connected POE port flicker at special frequency, which will enable the installer to easily and quickly find the connected Ethernet cable. This function can prevent mistakenly insertion or disconnection non-corresponding cable to artificially interrupt network connection.

    IP address scan
    In digital IP surveillance applications, if an IP camera’s IP address is not clear or forgotten; the device cannot be used .IP address scan can quickly search the connected IP camera or other network device’s IP address.

    Link monitor
    To add an IP camera or other network device to the current network group, the new IP address must not be occupied, otherwise it will cause IP conflicts and stop the equipment normal working. Link monitor can check if the new setting IP address is occupied.

    PING test
    PING is the most conventional network debugging tools (Ethernet port ping test) . It is used to test if the connected IP camera (or any other network equipment) is working normally and the IP address is correct.

    POE tester
    Tests the PoE voltage when the POE switch is supplying power to IP camera. It can clearly display the power+ and power- on the ethernet cable pins, each cable pin’s voltage and the failure connection of cable pin series numbers.

    Supported PTZ protocols:

    Pelco D Lilin-MLP2 Molynx Minking A01
    YAAN YAAN-0 Samsung Panasonic
    Fastrax CBC LC-NEW WV-CS850
    LG-MULTIX SANYO-SSP Santachi Minking B01
    DAT-SD PEARMAIN Vicon Vcltp
    Pelco P DH-YTC06 ALEC SONY-EVI
    AD Lilin-FAST
    Model Number 82-18193
    Signal System NTSC / PAL (Auto-Selecting)
    Display 7 inch TFT-LCD Screen
    Resolution 800 x 600 (H x V)
    LCD adjust Adjustable brightness, contrast, color of LCD
    SDI Input / Output 1 channel SDI input & 1 channel SDI output
    VGA signal input 1 channel VGA input, receive VGA signal from DVR / NVR. Conveniently to test and set DVR / NVR
    Video Input / Output 1 channel BNC input & 1 channel BNC looped output
    Video Output Mode 1.0 Vp-p
    Video Level Test Video signals measured in IRE or mV
    Power Adapter 5V DC, 2A input supply
    Power output 12V DC, 2A power output for camera
    Audio input 1 channel Audio input
    USB power output USB 5V 2A power output to mobile phone
    Communication RS232, RS422 simplex and RS485
    Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600, 19200bps
    Power Saving Features Sleep mode, Battery level indicator
    PTZ Address Scanning Scan for local PTZ address over data cables
    Rechargeable Battery 7 hours charge, work for 17 hours
    Battery 1 pcs Lithium Ion Polymer Battery; 7.4V DC, 6500mAh
    Video Display Displays video signal from analog input
    Video Signal Color bar generator for monitor testing
    UTP Cable Test Checks connections of UTP cables
    PTZ Protocol Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, TeleEye etc.
    PTZ data Capture Reads and displays commands sent from controllers
    Image 10x zoom 10x zoom image display and video out
    Photograph Snapshot and save the image as JPG file and screenshot
    Video record Video recording and playback from the SD card
    Port flicker Find the connected POE port quickly
    IP scan Find out the connected IP camera or network equipment´s IP address
    Link monitor Check the IP address whether is occupied
    Ping testing Network and Ip camera´ping testing
    PoE tester PoE voltage testing, PoE port flicker, PoE link monitoring
    Night Led Built Led lamp
    SD card Built in 4G Micro SD card, support Micro SD card for recording
    Cable scan Find out the connected cable in many messy cables. Connect one end of the cable to tester and the tester will send specific signals, which will enable the blue cable tracker to find out the other end of the connected cable quickly and easily by making clearly sound.
    Video level meter NTSC: Peak Range: 140±15IRE Sync signal Range: 40±5IRE Color Burst Range: 40±5IRE
    Dimension 253mm x 176mm x 52mm
    Gross Weight 2325g

      Main Features
    • 7.0" LCD with 800x600 resolution
    • Video signal level meter
    • PTZ camera controls
    • Unique 12VDC 2A power output to power camera with 3' pigtail
    • RS485/RS422 input and data logging
    • Network cable tester (opens, shorts, etc.)
    • RS232 input
    • 3.5mm audio input
    • Built in speaker
    • Color bar signal generator
    • Up to 17 hour battery life
    • 7 hour recharge time
    • BNC input with 3' M-to-M BNC pigtail
    • 12VDC 2A output to power camera with 3' pigtail
    • 5VDC 2A AC adaptor powers and charges tester
    • Li-ion 7.4V 6500mAh rechargeable battery (replacement battery available)
    • Carrying case included

    • Features:

      Port flicker
      The tester will send special signals to make the connected POE port flicker at special frequency, which will enable the installer to easily and quickly find the connected Ethernet cable. This function can prevent mistakenly insertion or disconnection non-corresponding cable to artificially interrupt network connection.

      IP address scan
      In digital IP surveillance applications, if an IP camera’s IP address is not clear or forgotten; the device cannot be used .IP address scan can quickly search the connected IP camera or other network device’s IP address.

      Link monitor
      To add an IP camera or other network device to the current network group, the new IP address must not be occupied, otherwise it will cause IP conflicts and stop the equipment normal working. Link monitor can check if the new setting IP address is occupied.

      PING test
      PING is the most conventional network debugging tools (Ethernet port ping test) . It is used to test if the connected IP camera (or any other network equipment) is working normally and the IP address is correct.

      POE tester
      Tests the PoE voltage when the POE switch is supplying power to IP camera. It can clearly display the power+ and power- on the ethernet cable pins, each cable pin’s voltage and the failure connection of cable pin series numbers.

      Supported PTZ protocols:

      Pelco D Lilin-MLP2 Molynx Minking A01
      YAAN YAAN-0 Samsung Panasonic
      Fastrax CBC LC-NEW WV-CS850
      LG-MULTIX SANYO-SSP Santachi Minking B01
      DAT-SD PEARMAIN Vicon Vcltp
      Pelco P DH-YTC06 ALEC SONY-EVI
      AD Lilin-FAST
      Model Number 82-18193
      Signal System NTSC / PAL (Auto-Selecting)
      Display 7 inch TFT-LCD Screen
      Resolution 800 x 600 (H x V)
      LCD adjust Adjustable brightness, contrast, color of LCD
      SDI Input / Output 1 channel SDI input & 1 channel SDI output
      VGA signal input 1 channel VGA input, receive VGA signal from DVR / NVR. Conveniently to test and set DVR / NVR
      Video Input / Output 1 channel BNC input & 1 channel BNC looped output
      Video Output Mode 1.0 Vp-p
      Video Level Test Video signals measured in IRE or mV
      Power Adapter 5V DC, 2A input supply
      Power output 12V DC, 2A power output for camera
      Audio input 1 channel Audio input
      USB power output USB 5V 2A power output to mobile phone
      Communication RS232, RS422 simplex and RS485
      Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600, 19200bps
      Power Saving Features Sleep mode, Battery level indicator
      PTZ Address Scanning Scan for local PTZ address over data cables
      Rechargeable Battery 7 hours charge, work for 17 hours
      Battery 1 pcs Lithium Ion Polymer Battery; 7.4V DC, 6500mAh
      Video Display Displays video signal from analog input
      Video Signal Color bar generator for monitor testing
      UTP Cable Test Checks connections of UTP cables
      PTZ Protocol Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, TeleEye etc.
      PTZ data Capture Reads and displays commands sent from controllers
      Image 10x zoom 10x zoom image display and video out
      Photograph Snapshot and save the image as JPG file and screenshot
      Video record Video recording and playback from the SD card
      Port flicker Find the connected POE port quickly
      IP scan Find out the connected IP camera or network equipment´s IP address
      Link monitor Check the IP address whether is occupied
      Ping testing Network and Ip camera´ping testing
      PoE tester PoE voltage testing, PoE port flicker, PoE link monitoring
      Night Led Built Led lamp
      SD card Built in 4G Micro SD card, support Micro SD card for recording
      Cable scan Find out the connected cable in many messy cables. Connect one end of the cable to tester and the tester will send specific signals, which will enable the blue cable tracker to find out the other end of the connected cable quickly and easily by making clearly sound.
      Video level meter NTSC: Peak Range: 140±15IRE Sync signal Range: 40±5IRE Color Burst Range: 40±5IRE
      Dimension 253mm x 176mm x 52mm
      Gross Weight 2325g
      Part Numbers
      MCM Part #:82-18193
      Defender Security Part #:82-18193
      Package Specifications & Dimensions
      Weight:4.5 lbs.
      Hazardous:No
      RoHS Comp:Yes
      Warranty:365 days
      Need to Return?
      Length:13 in.
      Width:11.5 in.
      Height:4 in.
      Shipping Information
      Extra Shipping Charge:No
      Drop Ship:No

Product Reviews Top

  • by audioftv

    on 4/8/2015

    Waste of Money

    Overall: 1 out of 5
    Value:
    Quality:

    I purchased this unit 2 months ago, the user manual is one of the worst I have ever seen.
    No One at MCM has any idea how to use this device to see IP Cameras, Analog is a breeze, nothing to learn.

    The amount of time I have spent trying to make this unit work could have been spent on profit making installs, I would tell you to never purchase this unit

Associated Products

Image of Multifunction CCTV Tester w/ IP, PoE, and TDR

82-18191 - Multifunction CCTV Tester w/ IP, PoE, and TDR

This multifunction tester is the perfect tool for any security/surveillance installer. It not only lets you test any camera or monitor remotely in both IP and analog installations, but also features a TDR function that locates the specific distance of cable fault...

In Stock

$199.00

Buy Now
Image of Replacement Battery for 82-18193

82-18194 - Replacement Battery for 82-18193

Replacement Battery for 82-18193

In Stock

$29.99

Buy Now
Image of Video Ground Loop Isolator - BNC Male To BNC Female

82-6133 - Video Ground Loop Isolator - BNC Male To BNC Female

This BNC ground loop isolator reduces ground loop interference with CCTV signals and can easily be installed into a new system, or implemented to an existing one. It’s useful when a video signal is transmitted via cable between points with different ground potenti...

In Stock

$15.99

Buy Now

Others Also Bought

Image of 50MHz-1GHz Broadband Amplifier

33-2675 - 50MHz-1GHz Broadband Amplifier

Broadband CATV/Antenna Signal Amplifier Ultra low noise amplifier employs high output push-pull design, with frequency range of 50MHz~1GHz, providing up to 34dB gain. Additionally, a passive 5~42MHz return path enables use with cable TV systems that utilize inter...

In Stock

$129.99

Buy Now
Image of Replacement Battery for 82-18193

82-18194 - Replacement Battery for 82-18193

Replacement Battery for 82-18193

In Stock

$29.99

Buy Now
Image of 7

82-18197 - 7" Touchscreen LCD Multifunction Camera Tester for CCTV and IP

7" Touch Screen Multi-function IP and Analog Camera Tester with WiFi The 7" touch screen IP camera tester is designed for maintenance and installation of both IP cameras and analog cameras, in addition to PTZs. It's the first tester to display an IP camera's imag...

In Stock

$319.00

Buy Now