MCM Electronics

Multifunction IP Camera Tester w/ 4.3" LCD Touch Screen By Defender Security (82-20490) MCM Part #82-20490

0 stars No reviews yet
& FREE Shipping

Specifications Top

4.3" Touch Screen Multi-function IP and Analog Camera Tester with WiFi

The 4.3" touch screen IP camera tester is designed for maintenance and installation of both IP cameras and 960H analog and PTZ cameras. This tester will display an IP camera's image so that field focusing and verification is possible. The combination of touch screen operation and multi-function device testing capabilities make this test a must-have for any security camera installer.

The 82-20490 tester allows you to focus-adjust traditional 960H analog cameras (does not support AHD/CVI/TVI or HD-SDI HDoC (HD over Coax), and it also goes one step further allowing you to see your IP camera image. You still get the ping/address-scan function for ONVIF IP cameras along with protocol support for over 70 customized IP camera protocols and more than 30 analog PTZ protocols. It also has many other functions for both traditional analog and IP camera testing all packed into one easy to carry, long-lasting, rugged field tester. Now you can significantly reduce your installation time and save hours of labor field focusing analog and IP cameras, testing networks and cable connections, setting up and testing PTZ protocols and settings, and troubleshooting signal problems on-site.

  • 4.3" Touchscreen IP tester and traditional 960H (CVBS) analog tester
  • Image screen shot and 4x image display zoom
  • Camera video recording and playback
  • HDMI video output
  • PoE 24W power output to IP camera
  • DC12V 2A power output to camera
  • USB 5V 2A power output to mobile phone
  • Video level meter
  • Cable scan
  • IP camera PoE voltage testing, ping testing, address search and image display (ONVIF compatible camera required for image display)

This tester offers technicians a wide range of features to simplify CCTV camera installations. Power, focus and aim your cameras locally without a trip back to the control room. The unit´s bright screen and easy to use menu are ideal for outdoor use. A lanyard and a hand strap are included to ease installs in locations.

The device allows the installer to control PTZ cameras that accept data over RS232, RS422 simplex or RS485 ports. The Address Search feature can be used to run a search and determine a PTZ unit´s address. The UTP cable test feature checks for connectivity across all 8 wires and also displays the pin-to-pin connections of the RJ45 connectors.

The unit includes a rechargeable Lithium Ion Polymer battery that charges for 7 hours and can last up to 17 hours in the field. An auxiliary 12VDC, 2A power supply can be used to locally power and adjust cameras in the field or on a test bench. The RS485 data capture feature displays the code output of serial control devices.

And it supports more than twenty PTZ protocols (e.g., Pelco-P, Pelco-D, Samsung, Panasonic, CBC, Bosch, TeleEye, Vicon, Sanyo-SSP).

Other functions include PoE voltage testing, PoE port flicker, PoE link monitoring, IP camera´ping testing, and IP address scan. Video images can also be zoomed in 1-10 times and there's also video snapshot/screenshot and video record and playback to a microSD card (4GB included). NTSC/PAL video is auto-selected, and the video signal measurement (IRE) let's you determine signal strength. You can setup function presets and user-defined short-cut keys, and the LED display has a night time mode.

Main Features
  • English and options for other languages
  • Tests both traditional 960H analog and IP cameras (note: HDoC cameras not supported...see 82-20495
  • 4.3" LCD screen display with capacitive touch screen (800*600 resolution; supports 1920 x 1080, 1080 x 720 resolutions)
  • Displays ONVIF compatible IP camera image and ONVIF IP PTZ controller
  • Supports more than 70 customized IP camera protocols
  • Includes video management software to view IP camera image
  • Built-in WiFi to receive network image and data
  • Network bandwidth testing
  • FTP Server, Static IP address, DHCP (simultaneously tests different segments for IP camera)
  • PoE 24W power supply to IP camera
  • HDMI signal output (supports up to 1080P)
  • DC12V 2A power output to camera
  • USB 5V 2A power output to mobile phone
  • Integrated LED Flashlight Lamp
  • Micro SD card (4GB card included)
  • User-defined shortcut keys (F1 and F2)
  • Adjustable LCD screen brightness, contrast, color, and saturation
  • Automatically displays either NTSC or PAL video format
  • Enhanced color bar generator
  • 4x video zoom magnification
  • Video record and playback from SD card
  • Snapshot and save the current image as JPG file on SD card (only for analog video test)
  • PING testing
  • Video signal level test (peak video signal level, SYNC signal level, COLOR BURST chroma level measurement)
  • Cable scan
  • IP address scan (quickly search IP address for the connected IP camera and other network devices)
  • PoE voltage measurement (test the PoE switch’s voltage to IP cameras, wireless AP device and other PD devices)
  • Device port flicker (find the connected PoE switch)
  • Link monitor (check if IP address is occupied)
  • PTZ address scan (search for the PTZ camera ID)
  • Network cable and telephone cable testing
  • Support RS232/RS485/RS422 (600 ~ 115200bps; adjustable)
  • Multi-protocol; supports more than thirty PTZ protocols (PELCO-P, PELCO-D, SAMSUNG etc.)
  • PTZ protocol analysis (control protocol command transmission)
  • PTZ control (Pan/tilt the PTZ unit; zooms in/out, adjusts the focus and aperture and sets the preset position)
  • Audio input test (test the audio signal from pickup devices)
  • Lithium Ion Polymer Battery (17 hours for normal use after charging for 7 -8 hours (replacement battery available)
  • Carrying case included

Supported PTZ protocols:

Pelco D Lilin-MLP2 Molynx Minking A01
YAAN YAAN-0 Samsung Panasonic
Fastrax CBC LC-NEW WV-CS850
LG-MULTIX SANYO-SSP Santachi Minking B01
Model Number 82-20490
Signal System NTSC / PAL (Auto-Selecting)
Display 4.3 inch LCD screen display, with capacitive touch screen
Resolution 800*480 resolution
IP camera type ONVIF, ONVIF PTZ, ACTi, Dahua IPC-HFW2100P, Hikvision, DS-2CD864-E13, Samsung SNZ-5200, Honeywell HICC-2300T, etc.
Network test FTP Server, Static IP address, DHCP; simultaneously test different IP camera segments, Network bandwidth testing
Management software apps Support mobile apps to view IP camera image
LCD display Adjustable brightness, contrast, color of LCD
HDMI signal output supports up to 1080P
Network port 10/100Mb auto adjust, RJ45
Wifi Built in Wifi, speeds up to 150M, receives wireless camera image etc
PoE power output PoE 24W power supply to IP camera
Video Input / Output 1 channel BNC input & 1 channel BNC looped output
Video Output Mode 1.0 Vp-p
Video Level Test Video signals measured in IRE or mV
Power Adapter 5V DC, 2A input supply
DC Power output 12V DC, 2A power output for camera
Audio input 1 channel audio signal input to test pickup device, 1 channel audio signal output to connect headphones
USB power output USB 5V 2A power output to mobile phone
Communication RS232, RS422 simplex and RS485
Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600, 19200bps
Power Saving Features Sleep mode, Battery level indicator
PTZ Address Scanning Scan for local PTZ address over data cables
Rechargeable Battery 7 hours charge, work for 17 hours
Battery 1pc Lithium Ion Polymer Battery; 7.4V DC, 5000mAh
Video Display Displays video signal from analog input
Video Signal Color bar generator for monitor testing
UTP Cable Test Checks connections of UTP cables
PTZ Protocol Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, TeleEye etc.
PTZ data capture Reads and displays commands sent from controllers
Image 4x zoom 4x zoom image display and video out
Photograph Snapshot and save the image as JPG file and screenshot
Video record Video recording and playback from the SD card
Port flicker Find the connected PoE port quickly
IP scan Find out the connected IP camera or network equipment´s IP address
Link monitor Check for an occupied IP address
Ping testing Network and IP camera´ping testing
PoE tester PoE voltage testing, PoE port flicker, PoE link monitoring
Night Led Built-in Led lamp
SD card 4G Micro SD card included; supports Micro SD card for recording up to 32G
Dimension 210mm x 140mm x 5mm (Tester); 290mm x 240mm x 100mm (Color box)
Weight 800g (Tester); 1780g (Tester with spare parts, black package, box)
Part Numbers
MCM Part #:82-20490
Defender Security Part #:82-20490
Package Specifications & Dimensions
Weight:4 lbs.
RoHS Comp:No
Warranty:365 days
Need to Return?
Length:11.5 in.
Width:10.5 in.
Height:4.75 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No

Product Reviews Top

Associated Products

Image of 7

82-18193 - 7" LCD Multifunction CCTV Tester for HD-SDI and IP/PoE

This HD multi-function 7" LCD tester allows you to focus-adjust analog and HD analog cameras, and ping/address-scan IP cameras. It also has many other functions for both analog and IP camera testing all packed into one easy to carry, long-lasting, rugged field te...

Special Order


Buy Now
Image of Multifunction IP and HD Analog Tester w/ 7.0

82-20500 - Multifunction IP and HD Analog Tester w/ 7.0" LCD Touch Screen

7" Touch Screen Multi-function IPC Tester with AHD+CVI+TVI HD-Analog and WiFi The ultimate CCTV field tester is here! In addition to displaying IP cameras, this 7" touch screen CCTV tester now incorporates connections for new high-definition AHD, CVI and TVI came...

On Backorder(Expected in 97 days)


Buy Now

Others Also Bought

Image of Articulating Mount for Flat Panel Televisions up to 37

50-16405 - Articulating Mount for Flat Panel Televisions up to 37"

Articulating Mount for Flat Panel Television This full motion mount is perfect for computer monitors and televisions measuring 17" through 37" diagonally. It allows single-stud mounting and provides swivel, tilt and level adjustment. The double arm design allows ...

In Stock


Buy Now