MCM Electronics

Tip CleanerMCM Part #: 21-4355  |  Tenma Part #: 21-4355

Tip Cleaner 4.7 stars from 11 ratings and 10 reviews.
Login to rate or review this product

  • Cleans tip quickly without reducing tip temperature
  • Cleans better than conventional sponges
  • May also be used as portable soldering pencilholder
  • Non-skid base

  • Product Reviews

    • "Wish I had picked one up sooner" by tmechanic on 5/6/2014
      Overall: 5 out of 5
      Value:
      Quality:

      It works great, easy to use, and far too handy not to have.

    • "Way better than a wet sponge" by pdaderko on 4/26/2014
      Overall: 5 out of 5
      Value:
      Quality:

      I've been using this for several years and have never looked back. It cleans the tip of the soldering iron better than a wet sponge, and doesn't cool the tip. The base is weighted with a rubber pad on the bottom, so it holds in place on the workbench nicely. The brass coil lasts a long time... after regular use for several years, I'm still on my original coil (I've rotated the coil a couple times). I wouldn't hesitate to buy another.

    • "much better then a wet sponge" by bwilson57 on 9/14/2013
      Overall: 5 out of 5
      Value:
      Quality:

      great price

    • "The cure for a dirty Tip" by CharlesLewis on 8/20/2012
      Overall: 4 out of 5
      Value:
      Quality:

      The base is weighted with a non skid foot pad. The base is metal = should survive many trips to the floor. The actual scrunggie pad is a bit softer than expected. Still fully useable. Will probably buy spares.

    • "Excellent Product" by phil-parrish on 8/19/2012
      Overall: 5 out of 5
      Value:
      Quality:

      Very good quality product. This unit has a padded weighted base to hold it in place. Excellent tip cleaning at an affordable price. I highly recommend this product for the amateur or the pro!

    • "Good item" by Ken Brown on 8/9/2012
      Overall: 4 out of 5
      Value:
      Quality:

      Tip cleaner works very well! Solid item

    • "Great Value" by lopezc0516 on 3/13/2012
      Overall: 5 out of 5
      Value:
      Quality:

      Great way to clean your tip without cooling it off!!!

    • "Great Tip Cleaner" by pjdobosz on 2/18/2012
      Overall: 5 out of 5
      Value:
      Quality:

      Nicely weighted, cleans tip without cooling it down. Never any solder bubbles left on the tip or falling onto the bench

    • "No more Sponges!!" by Starfire06 on 4/5/2011
      Overall: 5 out of 5
      Value:
      Quality:

      No more cooling down after wiping or rolling the tip to get it clean. Really helped speed up big soldering jobs on multi-pin connectors.

    • "Tip Cleaner" by Nadine on 3/31/2010
      Overall: 5 out of 5
      Value:
      Quality:

      I am very pleased with this tip cleaner. We use these daily in a small OEM facillity. The life of the solder tips has been extended by two to three times!

    • Rate It!

      Login Here to rate and review this product.

    Associated Products

    Image of Protective Safety Goggles

    108-3844 - Protective Safety Goggles

    Provides superior comfort and tighter seal. The molded frame provides better impact resistance. Protective goggles include scratch-resistant lenses with improved field of vision. Meets ANSI Z87.1 standards for eyards for eyor eye protection. SEI certified.

    Discontinued

    $2.29

    Buy Now
    Image of Soldering Iron Holder

    21-8160 - Soldering Iron Holder

    Metal base measures 31/2" (W) x 51/4" (D) Includes tip cleaning sponge Metal sleeve holder and spring support hold irons up to 3/4" diameter Compatible with Tenma #21-8120, 21-8130, 21-8135 and 21-8140

    In Stock

    $4.19

    Buy Now
    Image of Six Piece Soldering Aid Kit

    22-3790 - Six Piece Soldering Aid Kit

    •Specialized tools for soldering •Includes brush/scraper, brush/reamer, fork/reamer, hook/remover, hook/lifter, scraper/curved point

    In Stock

    $7.59

    Buy Now
    Image of Replacement Heating Element

    72-6407 - Replacement Heating Element

    Replacement desoldering element for Tenma #72-6340 and #72-6345 rework stations. Four-wire design includes connections for 24V, 48W element and integral temperature sensor. Ideal for replacing damaged elements, or upgrading older stations to accept the new, shorte...

    On Backorder(Expected in 23 days)

    $17.78

    Buy Now

    Others Also Bought

    Image of Universal Television Stand, For Televisions 32

    50-14795 - Universal Television Stand, For Televisions 32" ~ 60"

    Universal Television Stand Perfect for flat panel televisions that were mounted to the wall, but are to be moved to tabletop use. Universal mounting plate attaches to all VESA standard sets from 200x200 through 600x400, and provides a secure and attractive mount...

    In Stock

    $59.99

    Buy Now
    Image of Bracket Pole Mount VESA75/100

    50-14534 - Bracket Pole Mount VESA75/100

    Pole Mount Bracket for LCD Monitors Rugged bracket fits any 30mm ~ 60mm diameter pole, whether positioned horizontally or vertically. Great for use with PA speaker and light stands, lighting and stage trusses, and support masts. Pivoting mechanism allows monito...

    In Stock

    $20.39

    Buy Now
    Image of Double Sided Foam Tape

    28-955 - Double Sided Foam Tape

    •Thousands of uses •Fasten accessories to car dash, etc. •3/4" x 61/2' roll

    In Stock

    $4.19

    Buy Now
    Package Specifications & Dimensions
    Weight:0.204 lbs.
    Hazardous:No
    Warranty:90 days
    Need to Return?
    Length:5 in.
    Width:5 in.
    Height:2 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages
    Catalog/Page:

    MCM Cat 57, Page 1163

    MCM Cat 56, Page 985

    Mfr. Info

    Tenma Logo
    Mfr. Name:Tenma
    Mfr. Part Number:21-4355