MCM Electronics

Matching Transformer By Distributed By MCM (MP33028) MCM Part #MP33028

0 stars No reviews yet
Qty.Volume Price
This product currently has limited stock.

Allows use of balanced signal sources on unbalanced inputs. May be used with microphone or line level sources. 51/2" cable lead and spring strain relief reduces stress on mixing board or amplifier input. Fully metal transformer housing and 1/4" connector provide good shielding to ensure low-noise operation. Slide switch selects high or low impedance, balanced XLR input, 1/4" unbalanced 600ohm output.


  • Frequency response: 50Hz~15KHz
  • Overall length: 12"

  • Specifications Top

    Specifications: •Frequency response: 50Hz~15KHz •Overall length: 12"
    Part Numbers
    MCM Part #:MP33028
    Distributed By MCM Part #:MP33028
    Package Specifications & Dimensions
    Weight:0.2 lbs.
    Warranty:90 days
    Need to Return?
    Length:7.75 in.
    Width:2.5 in.
    Height:0.75 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No

    Product Reviews Top

    Associated Products

    Image of PBM-30 PA Amplifier

    555-6300 - PBM-30 PA Amplifier

    30W Mixer / Paging Amplifier Three channel mixer/amplifier meets a number of paging, background music and telephone interface requirements. Channel one accepts microphone input and provides VOX muting of the channel two aux/mic input. A third balanced input allow...

    In Stock


    Buy Now

    Others Also Bought

    Image of Caikote Conductive Coating Remote Key Pad Repair Kit

    200-315 - Caikote Conductive Coating Remote Key Pad Repair Kit

    Conductive Carbon Coating for most surfaces (rubber, epoxy, glass, plastic). It is ideal for repairing membrane buttons, keyboard buttons, and other carbon based surfaces. It may also be used as a coating for shielding (EMI) of electronics. Similar products on ...

    In Stock


    Buy Now
    Image of SMD Remover Kit

    21-3450 - SMD Remover Kit

    Safely removes SMDs using low heat. Fast and easy to use. Heat can be applied with a soldering iron, warm air pre-heater, or heat gun. The SMD is then easily removed with tweezers or a pick-up tool. Check out the attached video to see how easy it is!

    In Stock


    Buy Now