MCM Electronics

Cantilever Mount for Flat Panel Televisions 32''~42'' - 100lb. CapacityMCM Part #: 50-9530  |  Distributed By MCM Part #: PSW971L

Cantilever Mount for Flat Panel Televisions 32''~42'' - 100lb. Capacity 4.6 stars from 4 reviews.
Login to rate or review this product

Cantilever Flat Panel Television Mount:
Perfect for a wide variety of screen sizes, this rugged monitor arm mounts to a single wall stud, and supports up to 100 lbs. It will swivel at the wall and mid arm, providing a wide range of movement, and tilts up to 15 degrees for easy adjustment of any viewing angle.

Product Description

  • For televisions up to 42”
  • 100 lbs. weight limit
  • Fits VESA 75 x 75 to 400 x 200
  • Single stud mounting
  • Extends from 3.5” to 22” from wall
  • Includes all mounting hardware
  • Black color

Product Reviews

  • "Hardware business" by jamestcoats on 8/18/2013
    Overall: 5 out of 5

    Comes with every thing you need to install. Because I work at a hardware store it was very simpie for me to install. I love the way it works and it looks good to. I have a 40" tv / monitor . I give it 6 stars.

  • "Good, but not quite perfect" by Shewelect on 4/1/2013
    Overall: 3.5 out of 5

    Good strong unit that will support the load well. However, the mounting plate had two holes on top, offset from center, rather than one like the installation instructions show. In concrete wall mounting, this is good, giving twice the support. However, for 2x4 stud mounting, this is no good, as - even with a wonderful studfinder - you are likely to end up partially outside the stud with your fastners. I drilled a single hole and used a larger lag bolt than came with the kit. The top pivot for setting viewing angle from the floor does not seem to want to hold a 31lb TV at anything but full tilt down, but for this installation it was the ideal angle. I would have preferred a stronger grip.

  • "A great mount" by cmoist on 11/12/2012
    Overall: 5 out of 5

    I installed this mount in an application that required a cantilever style unit. Almost everything was stellar about the product. The only complaint I had was that the main mounting plate came with three holes - one at the bottom, centered, and two at the top - offset. While the kit comes with every different size screw you'll need, it only came with only two lag bolts. I secured the mount using one lag at the bottom and one at the topmost upper hole. With this configuration, the mount felt very solid, even with the 36" TV fully extended in all directions. The included covers do a good job of hiding the mounting plate and unit is well finished. Don't forget to account for the fact that longer A/V and power cords may be needed to accommodate the extending mount if using the supplied routing clips.

  • "Really heavy duty mount" by jimh on 3/22/2012
    Overall: 5 out of 5

    So this thing is heavy duty. With the provided 3-1/2" lag bolts, when you mount this to a stud, the 100lb rating is probably on the conservative side. Very nice construction of the arms, however i was shocked how small the socket and fitting is that actually attaches the TV to the arm. It does however work nicely and keeps the TV very stable. My application is only with a 32" LED TV, so weight is not an issue. I needed this size mount for the 100 x 200 mounting hole pattern on the set. If you are mounting this high on the wall to aim down to a bed, it does NOT have very much down angle. I had to make a "modification" in my Bridgeport to get more down angle. The double articulating arm allowed me to center the TV on a wall section between doors, even when the stud was offset to one side. The TV only sticks out from the wall about 5 inches the way I have it set. I looked at other brackets and this was the only one that would work for my application. I would buy this again.

  • Rate It!

    Login Here to rate and review this product.

Associated Products

Image of 8'' Torpedo Levels

22-7574 - 8'' Torpedo Levels

•High impact polystyrene body •Top reading feature allows greater visibility •One level, plumb, and 45¡ vial •Magnetic base •Mfr.#42-291

In Stock


Buy Now
Image of StudSensor i60 OneStep with LEDs and wall marker

22-9348 - StudSensor i60 OneStep with LEDs and wall marker

StudSensor™ i60 finds wood and metal studs and joists up to 1-1/2 inches deep beneath the surface of walls, ceilings, and floors, in one simple step. An integrated erasable marker makes it easy to mark the spot for anchoring without removing the tool from the ...

Special Order(Expected in 21 days)


Buy Now

Others Also Bought

Image of HDTV 70 Mile Deep Fringe Yagi Television Antenna

30-2415 - HDTV 70 Mile Deep Fringe Yagi Television Antenna

Deep Fringe UHF/HDTV Outdoor Antenna Highly rugged, 70 element directional antenna is engineered to receive UHF signals for digital and high definition television broadcasts from great distances. Corner Yagi design provides exceptional directivity and gain. Cli...

In Stock


Buy Now
Image of Hdmi Splitter 1X2 - 3D

33-12710 - Hdmi Splitter 1X2 - 3D

1X2 HDMI Splitter High quality HDMI splitters allow a single high definition video source to drive multiple video monitors.

In Stock


Buy Now
Image of Low Profile Cantilever LCD Mount 15

50-14315 - Low Profile Cantilever LCD Mount 15"~22" - 33lb. Capacity

Stylish LCD wall mount features a medium single arm. Flexible adjustment allows optimum screen positioning. Mount features an extremely small mounting profile, only 2".

In Stock


Buy Now
Package Specifications & Dimensions
Weight:11 lbs.
Warranty:90 days
Need to Return?
Length:17 in.
Width:11.5 in.
Height:3 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No
Catalog Pages

MCM Cat 57, Page 188

MCM Cat 56, Page 040

Mfr. Info

Distributed By MCM Logo
Mfr. Name:Distributed By MCM
Mfr. Part Number:PSW971L