MCM Electronics

Wireless Inventors Kit for Raspberry PIMCM Part #: 83-16345  |  Ciseco Part #: S005

No reviews yet!
Login to rate or review this product

The Wireless Inventors Kit for the Raspberry Pi (RasWIK) is an exciting and affordable addition to the Raspberry Pi.

RasWIK demonstrates that with our leading edge technology anyone (and we mean anyone) can build wireless sensors and actuators , you do not need huge experience, a degree or even any tools. We show you even how to connect the devices you build to “the Internet of Things” (IoT) service providers such as Xively.

Product Description

You can build wireless devices in just a matter of minutes. All the code is fully Open Source, you can use, modify and even sell your own products based on this kit.

There are 29 fully documented projects. The 17 hardware projects take you from very basic sensors, actuators and light controls to more complicated ones that include measuring temperature and light levels. The 12 fully completed software projects show you how to do more sophisticated stuff, including posting your measurements on the Internet.

Projects Included Adventures in digital I/O
  • Understanding basic digital inputs on the XinoRF by using a button
  • Understanding basic digital outputs on the XinoRF by using an LED
  • Lets build a simple traffic light
  • A 4 LED sweeping scanner
  • Driving LED's between pins
Measuring voltages with the Analog inputs
  • Using two resistors to divide a voltage
  • Using a variable resistor to change voltage
  • Let's measure the light in the room
  • Let's measure the temperature in the room
  • Making a temperature graph
  • Detecting a finger tap with the piezo sounder
Analog outputs the digital way
  • Let's first understand what PWM mean
  • Dimming an LED
  • Dimming 3 LED's to make colours
  • Generate a noise with the piezo sounder
Using the counter
  • Let's count button presses
Python programming and the
  • real world examples
  • An introduction to LLAP
  • Sending a LLAP message
  • Receiving a LLAP message
  • Periodically polling devices
  • Converting ADC to Voltage
  • Converting ADC to Temperature
  • Filtering LLAP messages
  • A simple if then do this
  • Logging to a text file
  • Sending data to the Xively IoT cloud
  • More complex stuff
    • WIK Launch Advanced
    • Reloading or updating XinoRF firmware manually

    Adventures in digital I/O
    • Understanding basic digital inputs on the XinoRF by using a button
    • Understanding basic digital outputs on the XinoRF by using an LED
    • Lets build a simple traffic light
    • A 4 LED sweeping scanner
    • Driving LED's between pins
    Measuring voltages with the Analog inputs
    • Using two resistors to divide a voltage
    • Using a variable resistor to change voltage
    • Let's measure the light in the room
    • Let's measure the temperature in the room
    • Making a temperature graph
    • Detecting a finger tap with the piezo sounder
    Analog outputs the digital way
    • Let's first understand what PWM mean
    • Dimming an LED
    • Dimming 3 LED's to make colours
    • Generate a noise with the piezo sounder
    Using the counter
    • Let's count button presses
    Python programming and the
  • real world examples
  • An introduction to LLAP
  • Sending a LLAP message
  • Receiving a LLAP message
  • Periodically polling devices
  • Converting ADC to Voltage
  • Converting ADC to Temperature
  • Filtering LLAP messages
  • A simple if then do this
  • Logging to a text file
  • Sending data to the Xively IoT cloud
  • More complex stuff
    • WIK Launch Advanced
    • Reloading or updating XinoRF firmware manually


    Included in the Kit
    • 1 x Ciseco Slice of Radio
    • 1 x Ciseco XinoRF development board
    • 1 x 4Gb SD card with Pi OS and sample software
    • 1 x USB to Mini USB cable
    • 1 x Small breadboard
    • LED's - 5 x Red, 5 x Yellow, 5 x Green and 1 x Blue
    • 1 x Transistor and 1 x Diode
    • 10 x 10K Resistor, 20 x 470R Resistor, 1 x Light Dependant Resistor (light sensor) and 1 x Thermistor (temperature sensor)
    • 1 x Piezo sounder
    • 3 x Push buttons
    • 25 x Male to Male Jumper wires (assorted colors)
    • Length of hook up wire.

    Product Reviews

    • Rate It!
      Be the first to rate this product!

      Login Here to rate and review this product.

    Others Also Bought

    Image of Pi Rack Accessory board for Raspberry Pi

    83-15497 - Pi Rack Accessory board for Raspberry Pi

    The PiRack is an expansion board allowing the connection of multiple IO boards to the Raspberry Pi. This accessory board was designed to be a part of the Pi family and works with the Pi Face board and Camera module

    In Stock

    $10.49

    Buy Now
    Image of 5MP Raspberry Pi Camera Board

    28-17733 - 5MP Raspberry Pi Camera Board

    The Raspberry Pi Camera Module is a 5 megapixel custom designed add-on for Raspberry Pi, featuring a fixed focus lens. It's capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. It attaches to Pi by way of one of th...

    In Stock

    $25.00

    Buy Now
    Image of Pecan Pi Relay Kit- 6 Relay Board for Raspberry Pi

    28-17913 - Pecan Pi Relay Kit- 6 Relay Board for Raspberry Pi

    The Pecan Pi Relay kit is designed to be interfaced with the GPIO connector on the Raspberry Pi board. The Pecan Pi features six normally open relays, each capable of switching up to 12A @ 250VAC. The relays are rated for at least 1.5 million cycles.

    In Stock

    $24.99

    Buy Now
    Package Specifications & Dimensions
    Weight:0.31 lbs.
    Hazardous:No
    Warranty:90 days
    Need to Return?
    Length:6.69 in.
    Width:4.72 in.
    Height:2.56 in.
    Shipping Information
    Extra Shipping Charge:No
    Drop Ship:No
    Catalog Pages
    Catalog/Page:

    Mfr. Info

    Ciseco Logo
    Mfr. Name:Ciseco
    Mfr. Part Number:S005