The Colossus 15XB is intended for use as a high-output sub-bass driver either singly or in multi-way systems. The unit features a 4 inch ‘sandwich’ (inside and outside windings) voice coil immersed in a symmetric magnetic field and centralized by using two suspensions in a dual arrangement to maintain ultra linearity and stability at high excursions. The heavily ribbed straight-sided paper cone membrane is reinforced with high-strength composite fibres to resist deformation under extreme loads. The driver handles 800W continuous and can cope with peaks in excess of 3200 Watts. The Colossus 15XB is designed for use in 70 to 150 litre ported enclosures.
Specifications:
| Nominal Chassis Diameter |
15” |
| Impedance |
8ohm |
| Power Handling |
800W RMS |
| Peak Power (6dB Crest Factor) |
3200W |
| Usable Frequency Range -6dB |
40 Hz - 1 kHz |
| Sensitivity (1 w - 1 m) |
99 dB |
| Moving Mass inc. Air Load |
123 grams |
| Minimum Impedance Zmin |
7.5ohm |
| Effective Piston Diameter |
13.03” / 331 mm |
| Peak Displacement Volume of Cone Vd |
0.98 litres |
| Magnet Weight |
120 oz |
| Magnetic Gap Depth |
0.39” / 10 mm |
| Flux Density |
1.1 Tesla |
| Coil Winding Height |
0.90” / 23 mm |
| Voice Coil Diameter |
4.0” / 101.6 mm |
Thiele Small Parameters:
|
| FS Hz |
38 Hz |
| RE Ohms |
6 .5 O |
| Qms |
7.48 |
| Qes |
0.336 |
| Qts |
0.32 |
| Vas Ltr |
168 |
| Vd litres |
0.637 |
| CMS (mm/N) |
0.164 |
| BL T/m |
22.28 |
| Mms (grms) |
104 |
| Xmax (mm) |
7.5 |
| Sd (cm2) |
855.3 |
| Efficiency % |
1.67 |
| Le (1k Hz) |
2.191 mH |