MCM Electronics

Sovereign Series 12 Inch Prosound Woofer 200W By Fane International (SOVEREIGN 12-200) MCM Part #55-2830

0 stars No reviews yet
MSRP: $72.99
You Save: $5.33 (7 %)

12 Inch Prosound Woofer

Sound reinforcement woofer provides good power handling and high efficiency. It is ideal for use as a mid bass woofer in medium sized vented enclosures, or as a midrange in a small sealed enclosure.

Specifications Top

Electro-Acoustic Specifications
Nominal Chassis Diameter 12"
Impedance 8 Ohm
Power Handling (RMS) 200 w (EIA 426A)
Peak Power (6dB CresFactor) 800 w (EIA 426A)
Usable Frequency Range 45 Hz - 4 KHz
Sensitivity (1 w - 1 m) 100 dB
Moving Mass inc. Air Load 49 grams
Minimum Impedance Zmin 7.4 Ohm
Effective Piston Diameter 10.31” / 262 mm
Peak Displacement Volume of Cone 0.165 litres
Magnet Weight 38 oz
Magnetic Gap Depth 0.31" / 8 mm
Flux Density 1.0 Tesla
Coil Winding Height 0.31" / 8 mm
Voice Coil Diameter 2" / 11 mm

Thiele Small Parameters
FS Hz 45 Hz
RE Ohms 5.1 Ohms
Qms 7.1
Qes 0.472
Qts 0.44
Vas 104.8 Ltr
Vd litres 0.184
CMS (mm/N) 0.25
BL T/m 13
Mms (grms) 49
Xmax (mm) 4.5
Sd (cm2) 530.9
Efficiency % 1.95
Le (1kHz) 1.56 mH

Mounting Information
Overall Diameter 12.00” / 310 mm
Flange Height 0.27” / 7 mm
Baffle Hole Diameter 11.25” / 286 mm
Gasket Supplied Front & Rear
Fixing Holes 8x 7.0 mm on 11.75"
Depth 5.43” / 138 mm
Weight 7.71 lb / 3.5 kg

Part Numbers
MCM Part #:55-2830
Fane International Part #:SOVEREIGN 12-200
Package Specifications & Dimensions
Weight:9.36 lbs.
Warranty:365 days
Need to Return?
Length:13 in.
Width:13 in.
Height:7 in.
Shipping Information
Extra Shipping Charge:No
Drop Ship:No

Product Reviews Top

Associated Products

Image of Acoustic Dampening Pad

LS00916 - Acoustic Dampening Pad

Perfect for internal speaker enclosure dampening, this wadding provides the perfect solution to eliminating problematic low frequency internal resonance. Made from 2/3 sheeps wool and 1/3 polyester fiber, this material is a must for any speaker building or...

Limited Stock


Buy Now
Image of Screw Mount Rubber Feet

LS01634 - Screw Mount Rubber Feet

Perfect for finishing off the latest project or prototype, or for replacing lost or damaged feet on existing equipment. Screw mounting and internal metal washer provide improved strength compared to adhesive units. Non-skid rubber material helps stabilize encl...

In Stock


Buy Now